Line & Duct Burners
RatioStar
RatioStar uses stainless-steel modules in rows of up to 24, with propagation modules carrying ignition between rows.
RatioStar uses stainless-steel modules in rows of up to 24, with propagation modules carrying ignition between rows. On-ratio control and configurable burner matrices address process-air distribution, reduced oxygen and elevated inlet temperatures. Eclipse can engineer a complete duct and gas-train system around the required heating duty.
Features & Benefits
- Velocity Across Burner
- Advised ≈10-15 m/s; Range ≈5-25 m/s
- Nozzle Gas Pressure
- Natural Gas 59 mbar; Propane 25 mbar
- Typical Excess Air
- ≈30% (λ ≈ 1.3 at maximum input)
- Temperature Limits
- Upstream: 1110 deg F (600 deg C), Downstream: 1830 deg F (1000 deg C)
- Air Inlet Pressure
- ± 10 to 15 mbar
- Flame Supervision
- UV Scanner only
- Air Pressure Drop
- 2 to 2.5 mbar across stabilization plate
- Turndown Ratio
- 1:5 on air
- Input Capacity
- Max - 425,000 Btu/h (125 kW) per module|Min - 42,500 Btu/h (12.5 kW) per module
- Control Method
- Mechanically or electronically linked air/gas valves
- Ignition Type
- Pilot
- Flame Length
- ≈1500 mm from Stabilization Plate
- Model Name
- RatioStar RAS, Version 1
- Dimensions
- ≈150 x 150 mm
- Fuel Type
- Natural Gas; Propane (other gases on request)
- Emissions
- CO and NOx performance shown in datasheet graphs (application‑dependent)
- Approvals
- Gas Manifold: AISI 316L (1.4404); Stabilization Plate: Avesta 253 MA (1.4893); Flame Shield: Avesta 253 MA (1.4893); Gas Nozzles: AISI 321 (1.4541)
- Configurable rows distribute heat around the process-air profile.
Applications
- Process-air heating
- Low-oxygen process-air reheating
- High-inlet-temperature air heating
Detailed capabilities
Rows, propagation and hot process air
RatioStar rows contain up to 24 stainless modules, with propagation modules linking rows for cross-ignition. The matrix can therefore follow the duct and required heat pattern. On-ratio control addresses efficiency, including low-oxygen streams needing added heat and elevated inlet temperatures beyond standard air-heater duties. A complete duct/gas-train system can be engineered around the process rather than inferred from a module alone.
Features and benefits
- Configurable rows distribute heat around the process-air profile.
Published application context
- Process-air heating
- Low-oxygen process-air reheating
- High-inlet-temperature air heating
Processing & Performance Metrics
- Velocity Across Burner
- Advised ≈10-15 m/s; Range ≈5-25 m/s
- Emissions
- CO and NOx performance shown in datasheet graphs (application‑dependent)
Pressure Specifications
- Nozzle Gas Pressure
- Natural Gas 59 mbar; Propane 25 mbar
Combustion Air, Blower & Emissions Specifications
- Typical Excess Air
- ≈30% (λ ≈ 1.3 at maximum input)
Temperature Control/Measurement
- Temperature Limits
- Upstream: 1110 deg F (600 deg C), Downstream: 1830 deg F (1000 deg C)
Air & Combustion Air Specifications
- Air Inlet Pressure
- ± 10 to 15 mbar
- Air Pressure Drop
- 2 to 2.5 mbar across stabilization plate
Ignition, Flame & Supervision Specifications
- Flame Supervision
- UV Scanner only
- Ignition Type
- Pilot
Performance, Flow & Capacity
- Turndown Ratio
- 1:5 on air
Performance Specifications
- Input Capacity
- Max - 425,000 Btu/h (125 kW) per module; Min - 42,500 Btu/h (12.5 kW) per module
Control, Logic & Functional Behavior
- Control Method
- Mechanically or electronically linked air/gas valves
Burner/Flame‑Related Lengths
- Flame Length
- ≈1500 mm from Stabilization Plate
Overview
- Model Name
- RatioStar RAS, Version 1
Dimensions & Weight
- Dimensions
- ≈150 x 150 mm
Fuel, Gas & Media Specifications
- Fuel Type
- Natural Gas; Propane (other gases on request)
Standards & Certifications
- Approvals
- Gas Manifold: AISI 316L (1.4404); Stabilization Plate: Avesta 253 MA (1.4893); Flame Shield: Avesta 253 MA (1.4893); Gas Nozzles: AISI 321 (1.4541)
| Parameter | Published value / configuration |
|---|---|
| Velocity Across Burner | Advised ≈10-15 m/s; Range ≈5-25 m/s |
| Emissions | CO and NOx performance shown in datasheet graphs (application‑dependent) |
| Nozzle Gas Pressure | Natural Gas 59 mbar; Propane 25 mbar |
| Typical Excess Air | ≈30% (λ ≈ 1.3 at maximum input) |
| Temperature Limits | Upstream: 1110 deg F (600 deg C), Downstream: 1830 deg F (1000 deg C) |
| Air Inlet Pressure | ± 10 to 15 mbar |
| Air Pressure Drop | 2 to 2.5 mbar across stabilization plate |
| Flame Supervision | UV Scanner only |
| Ignition Type | Pilot |
| Turndown Ratio | 1:5 on air |
| Input Capacity | Max - 425,000 Btu/h (125 kW) per module; Min - 42,500 Btu/h (12.5 kW) per module |
| Control Method | Mechanically or electronically linked air/gas valves |
| Flame Length | ≈1500 mm from Stabilization Plate |
| Model Name | RatioStar RAS, Version 1 |
| Dimensions | ≈150 x 150 mm |
| Fuel Type | Natural Gas; Propane (other gases on request) |
| Approvals | Gas Manifold: AISI 316L (1.4404); Stabilization Plate: Avesta 253 MA (1.4893); Flame Shield: Avesta 253 MA (1.4893); Gas Nozzles: AISI 321 (1.4541) |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 00.4121003.11 | PLT,STABILISATION,FFB,RAS | Request quotation |
| 00.4121003.12 | PLT,PROPAGATION,FFB | Request quotation |
| 00.4121003.15 | PLT,PROPAGATION,FFB,151 MM | Request quotation |
| 00.4121006.00 | MTG STRP,FLUE FIRE BRNR | Request quotation |
| 00.4121028.04 | NZL,GAS,RAS,HP,SPR ONLY | Request quotation |
| 00.4121028.13 | NOZZLE GAS RAS LOW PRESSURE | Request quotation |
| 00.4121028.14 | NZL,GAS,PROPAGATION,RAS,FFB | Request quotation |
| 00.4121029.11 | PLT,END,RAS | Request quotation |
| 00.4121029.13 | PLT,END,RAS,PILT | Request quotation |
| 00.4121029.17 | PLT,END,UV,PILT,500 MM,151MM | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
RatioStar Product Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
