Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Line & Duct Burners

APX Burner Line Burner

APX uses a single aluminum extrusion for its fuel and air manifolds, reducing body joints in a nozzle-mix line burner.

APX uses a single aluminum extrusion for its fuel and air manifolds, reducing body joints in a nozzle-mix line burner. Straight, H-shaped and custom-grid arrangements address fresh or low-temperature recirculated air. The source distinguishes maximum straight-burner length from packaged-unit length, with low-pressure natural gas, propane or butane specified.

Features & Benefits

Installation Orientation
Horizontal or vertical firing (upward or downward)
Mixing Plate Materials
Stainless Steel
Service Requirements
Annual inspection recommended; visual flame and piping checks
Typical Excess Air
Clean fresh combustion air, 21% O2; max 120°F; constant or modulated airflow
Process Conditions
In-duct back pressure -40 to +40 in wc|Min process air velocity 6 ft/s|Slide-in ±12 in wc|Wall-mount suction/balanced
CO/NOx Performance
Low CO and NOx over full turndown (application‑dependent)
Mounting Options
Packaged or external blower|Slot-mounted or continuous flange|Wall-mounted (external), in-duct, slide-in unit
Maximum Capacity
Up to 1.0 MBtu/h per ft (recirculating air)|Up to 1.36 MBtu/h per ft (fresh air)
Turndown Ratio
Up to 30:1 (recirculating air)|Up to 40:1 (fresh air)
Ignition Type
Pilot ignition or direct ignition (configuration‑dependent)
Flame Length
Recirculating: 7-10 ft (application dependent)|Typical fresh air: 3-5 ft
Model Name
APX Burner Line Burner
Functions
Nozzle-mix line burner for fresh or low-temperature recirculating air heating applications
Fuel Type
Natural Gas, Propane, Butane; LPG capable with proper controls
Material
Single-Piece Aluminum Extrusion Air/Gas Body
  • A jointless extrusion reduces potential body leakage points.

Applications

  • Fresh-air heating
  • Low-temperature recirculated-air heating

Detailed capabilities

Jointless manifolds and modular geometry

APX shares a single aluminum extrusion between its gas and air passages, reducing manifold joints and potential leaks. Stainless mixing plates complete the flame section. Straight, H-shaped and engineered-grid patterns fit the duct, with separate maximum lengths for straight designs and supplied packages. The burner supplies nozzle-mix combustion independently of varying process airflow and is limited to the specified low-pressure gas fuels.

Manufacturer reference ↗

Features and benefits

  • A jointless extrusion reduces potential body leakage points.

Manufacturer reference ↗

Published application context

  • Fresh-air heating
  • Low-temperature recirculated-air heating

Manufacturer reference ↗

Specifications

Installation & Mounting Specifications

Installation Orientation
Horizontal or vertical firing (upward or downward)
Mounting Options
Packaged or external blower; Slot-mounted or continuous flange; Wall-mounted (external), in-duct, slide-in unit

Material Specifications

Mixing Plate Materials
Stainless Steel
Material
Single-Piece Aluminum Extrusion Air/Gas Body

Ignition, Flame & Supervision Specifications

Service Requirements
Annual inspection recommended; visual flame and piping checks
Ignition Type
Pilot ignition or direct ignition (configuration‑dependent)

Combustion Air, Blower & Emissions Specifications

Typical Excess Air
Clean fresh combustion air, 21% O2; max 120°F; constant or modulated airflow

Processing & Performance Metrics

Process Conditions
In-duct back pressure -40 to +40 in wc; Min process air velocity 6 ft/s; Slide-in ±12 in wc; Wall-mount suction/balanced
CO/NOx Performance
Low CO and NOx over full turndown (application‑dependent)
Maximum Capacity
Up to 1.0 MBtu/h per ft (recirculating air); Up to 1.36 MBtu/h per ft (fresh air)

Performance, Flow & Capacity

Turndown Ratio
Up to 30:1 (recirculating air); Up to 40:1 (fresh air)

Burner/Flame‑Related Lengths

Flame Length
Recirculating: 7-10 ft (application dependent); Typical fresh air: 3-5 ft

Applications & Compatibility

Applications
Fresh air and low‑temperature recirculating air heating; Make‑up air systems, spray booths, ovens, dryers, paper, food, gypsum, paint shops

Overview

Model Name
APX Burner Line Burner

Control, Logic & Functional Behavior

Functions
Nozzle-mix line burner for fresh or low-temperature recirculating air heating applications

Fuel, Gas & Media Specifications

Fuel Type
Natural Gas, Propane, Butane; LPG capable with proper controls
APX Burner Line Burner — manufacturer page values
ParameterPublished value / configuration
Installation OrientationHorizontal or vertical firing (upward or downward)
Mounting OptionsPackaged or external blower; Slot-mounted or continuous flange; Wall-mounted (external), in-duct, slide-in unit
Mixing Plate MaterialsStainless Steel
MaterialSingle-Piece Aluminum Extrusion Air/Gas Body
Service RequirementsAnnual inspection recommended; visual flame and piping checks
Ignition TypePilot ignition or direct ignition (configuration‑dependent)
Typical Excess AirClean fresh combustion air, 21% O2; max 120°F; constant or modulated airflow
Process ConditionsIn-duct back pressure -40 to +40 in wc; Min process air velocity 6 ft/s; Slide-in ±12 in wc; Wall-mount suction/balanced
CO/NOx PerformanceLow CO and NOx over full turndown (application‑dependent)
Maximum CapacityUp to 1.0 MBtu/h per ft (recirculating air); Up to 1.36 MBtu/h per ft (fresh air)
Turndown RatioUp to 30:1 (recirculating air); Up to 40:1 (fresh air)
Flame LengthRecirculating: 7-10 ft (application dependent); Typical fresh air: 3-5 ft
ApplicationsFresh air and low‑temperature recirculating air heating; Make‑up air systems, spray booths, ovens, dryers, paper, food, gypsum, paint shops
Model NameAPX Burner Line Burner
FunctionsNozzle-mix line burner for fresh or low-temperature recirculating air heating applications
Fuel TypeNatural Gas, Propane, Butane; LPG capable with proper controls

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
0050APX.5' APX LINEBURNERRequest quotation
0100APX1' APX LINEBURNERRequest quotation
0150APX1.5 FT APX BurnerRequest quotation
0200APX2' APX LINEBURNERRequest quotation
0250APX2.5' APX LINEBURNERRequest quotation
0300APX3' APX LINEBURNERRequest quotation
0350APX3.5' APX LINEBURNERRequest quotation
0350APXGABSPL 3.5' GA BRAUN APX LINEBURNERRequest quotation
0400APX4' APX LINEBURNERRequest quotation
0500APX5' APX LINEBURNERRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/line-and-duct-burners/apx-burner-line-burner

Last source check: 2026-11-02

APX Burner Line Burner Product Image · Manufacturer ownership retained; republication licence not independently confirmed

APX Burner Line Burner Product Image 3 · Manufacturer ownership retained; republication licence not independently confirmed

APX Burner Line Burner Product Image 1 · Manufacturer ownership retained; republication licence not independently confirmed

APX Burner Line Burner Product Image 2 · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry