Line & Duct Burners
AHMA-DB
AHMA-DB adds forced-draught combustion air to the modular AH-MA design.
AHMA-DB adds forced-draught combustion air to the modular AH-MA design. A mounting flange supports wall, plate or duct insertion, with the fan positioned inside or outside. The burner addresses slightly negative or positive duct pressure and operates independently of the process-airflow supply, using the listed gaseous fuels.
Features & Benefits
- Maximum Air Supply Temperature
- ≤ 250 deg F (121 deg C)
- Valve Train Pressure
- Fuel pressure to ratio regulator inlet per Datasheet 163; valve train sized to provide specified pressure
- Maintenance Interval
- Low-fire start recommended; if low fire is too low to ignite within code time, start at higher input, resize/relocate controls, or use spark-ignited pilot; pilot fuel flow must be interrupted after trial
- Gas Pipe Connections
- Left-hand or right-hand piping; BSP or NPT threaded connections
- Motor Requirements
- 90 deg stroke, continuous or high/low modulating, reversible|≤2 rpm (≈30 s/90 deg ), ≥25 in‑lb (2.8 Nm) torque
- Monitoring System
- Flame sensor + flame monitoring control; control must maintain spark for a fixed time during ignition
- Flame Supervision
- Flame rod or UV scanner; must comply with applicable local codes and be compatible with the monitoring control
- Mounting Options
- External mounting on wall duct or internal mounting with fixing plate
- Air Flow Switch
- Eclipse supports NFPA requirement to use an air pressure switch|Provides signal when blower air pressure is insufficient
- Turndown Ratio
- Greater than 20:1 (max to min power)
- Control Method
- Motorized butterfly valve modulates fuel flow only; burner air side remains fixed
- Blower Options
- Integrated (mounted) or remote blower; 50 Hz IEC (CE) or 60 Hz NEMA (UL/CSA) motors
- Ignition Type
- Direct spark or spark-ignited built-in pilot for models below AB0400L; larger models use spark-ignited built-in pilot
- Burner Design
- Modular burner with mixing in the head (DualBlock concept)
- Burner Style
- Straight sections, double T geometries, and cross sections
- Air Filter
- Air filter with internal flow adjustment|Air inlet with adjustment/protection grid
- Functions
- Modular burner designed to work at the core of the airflow; extremely clean combustion; suitable for ducts, furnaces, ovens and dryers, including high humidity, low O2 and variable flow applications
- Fuel Type
- Natural Gas, Propane, Butane; contact Eclipse for alternative fuels
- Material
- Stainless Steel
- Capacity range
- 500,000 to 28,000,000 Btu/h (147 to 8200 kW)
- Turndown
- greater than 20:1
- Combustion remains independent of changing process airflow.
Applications
- Duct and furnace process-air heating
Detailed capabilities
Forced-draught air independent of the process stream
AHMA-DB adds a fan-driven combustion-air supply to the modular AH-MA concept. The fan can sit inside or outside the furnace/duct, and the mounting flange allows the burner to be inserted through a wall or plate. It serves the stated slightly negative or lightly pressurized ducts, with combustion separated from the amount of process air passing the burner.
Features and benefits
- Combustion remains independent of changing process airflow.
Published application context
- Duct and furnace process-air heating
Technical facts in the product overview
- Capacity range: 500,000 to 28,000,000 Btu/h (147 to 8200 kW)
- Turndown: greater than 20:1
Air/Exhaust/Flue Gas Temperatures
- Maximum Air Supply Temperature
- ≤ 250 deg F (121 deg C)
Pressure Specifications
- Valve Train Pressure
- Fuel pressure to ratio regulator inlet per Datasheet 163; valve train sized to provide specified pressure
Electrical Specifications
- Maintenance Interval
- Low-fire start recommended; if low fire is too low to ignite within code time, start at higher input, resize/relocate controls, or use spark-ignited pilot; pilot fuel flow must be interrupted after trial
Connections & Interfaces
- Gas Pipe Connections
- Left-hand or right-hand piping; BSP or NPT threaded connections
Motor Specifications
- Motor Requirements
- 90 deg stroke, continuous or high/low modulating, reversible; ≤2 rpm (≈30 s/90 deg ), ≥25 in‑lb (2.8 Nm) torque
Actuation, Valve & Motion Control Specifications
- Monitoring System
- Flame sensor + flame monitoring control; control must maintain spark for a fixed time during ignition
Ignition, Flame & Supervision Specifications
- Flame Supervision
- Flame rod or UV scanner; must comply with applicable local codes and be compatible with the monitoring control
- Ignition Type
- Direct spark or spark-ignited built-in pilot for models below AB0400L; larger models use spark-ignited built-in pilot
Installation & Mounting Specifications
- Mounting Options
- External mounting on wall duct or internal mounting with fixing plate
Air & Combustion Air Specifications
- Air Flow Switch
- Eclipse supports NFPA requirement to use an air pressure switch; Provides signal when blower air pressure is insufficient
- Air Filter
- Air filter with internal flow adjustment; Air inlet with adjustment/protection grid
Performance, Flow & Capacity
- Turndown Ratio
- Greater than 20:1 (max to min power)
Control, Logic & Functional Behavior
- Control Method
- Motorized butterfly valve modulates fuel flow only; burner air side remains fixed
- Functions
- Modular burner designed to work at the core of the airflow; extremely clean combustion; suitable for ducts, furnaces, ovens and dryers, including high humidity, low O2 and variable flow applications
Combustion Air, Blower & Emissions Specifications
- Blower Options
- Integrated (mounted) or remote blower; 50 Hz IEC (CE) or 60 Hz NEMA (UL/CSA) motors
Product Design & Configuration
- Burner Design
- Modular burner with mixing in the head (DualBlock concept)
- Burner Style
- Straight sections, double T geometries, and cross sections
Applications & Compatibility
- Applications
- Furnaces, ovens, dryers, air make‑up systems with variable flow, humidity, or oxygen levels; Heating of process air streams in ducts, ovens, dryers, and furnaces
Fuel, Gas & Media Specifications
- Fuel Type
- Natural Gas, Propane, Butane; contact Eclipse for alternative fuels
Material Specifications
- Material
- Stainless Steel
Technical Specifications
- Capacity range
- 500,000 to 28,000,000 Btu/h (147 to 8200 kW)
- Turndown
- greater than 20:1
| Parameter | Published value / configuration |
|---|---|
| Maximum Air Supply Temperature | ≤ 250 deg F (121 deg C) |
| Valve Train Pressure | Fuel pressure to ratio regulator inlet per Datasheet 163; valve train sized to provide specified pressure |
| Maintenance Interval | Low-fire start recommended; if low fire is too low to ignite within code time, start at higher input, resize/relocate controls, or use spark-ignited pilot; pilot fuel flow must be interrupted after trial |
| Gas Pipe Connections | Left-hand or right-hand piping; BSP or NPT threaded connections |
| Motor Requirements | 90 deg stroke, continuous or high/low modulating, reversible; ≤2 rpm (≈30 s/90 deg ), ≥25 in‑lb (2.8 Nm) torque |
| Monitoring System | Flame sensor + flame monitoring control; control must maintain spark for a fixed time during ignition |
| Flame Supervision | Flame rod or UV scanner; must comply with applicable local codes and be compatible with the monitoring control |
| Ignition Type | Direct spark or spark-ignited built-in pilot for models below AB0400L; larger models use spark-ignited built-in pilot |
| Mounting Options | External mounting on wall duct or internal mounting with fixing plate |
| Air Flow Switch | Eclipse supports NFPA requirement to use an air pressure switch; Provides signal when blower air pressure is insufficient |
| Air Filter | Air filter with internal flow adjustment; Air inlet with adjustment/protection grid |
| Turndown Ratio | Greater than 20:1 (max to min power) |
| Control Method | Motorized butterfly valve modulates fuel flow only; burner air side remains fixed |
| Functions | Modular burner designed to work at the core of the airflow; extremely clean combustion; suitable for ducts, furnaces, ovens and dryers, including high humidity, low O2 and variable flow applications |
| Blower Options | Integrated (mounted) or remote blower; 50 Hz IEC (CE) or 60 Hz NEMA (UL/CSA) motors |
| Burner Design | Modular burner with mixing in the head (DualBlock concept) |
| Burner Style | Straight sections, double T geometries, and cross sections |
| Applications | Furnaces, ovens, dryers, air make‑up systems with variable flow, humidity, or oxygen levels; Heating of process air streams in ducts, ovens, dryers, and furnaces |
| Fuel Type | Natural Gas, Propane, Butane; contact Eclipse for alternative fuels |
| Material | Stainless Steel |
| Capacity range | 500,000 to 28,000,000 Btu/h (147 to 8200 kW) |
| Turndown | greater than 20:1 |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Manufacturer sources
Last source check: 2026-11-02
Duct burners · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
