Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Line & Duct Burners

RadMax®

RadMax delivers radiant heat through ceramic or metal-foam tiles for drying, forming and heat-treatment duties.

RadMax delivers radiant heat through ceramic or metal-foam tiles for drying, forming and heat-treatment duties. A cast-iron body, stainless retainers and tool-free tile removal support service. Low-profile horizontal or vertical mounting fits restricted spaces, while temperature limits, face temperatures and manifold pressures must follow the selected radiant arrangement.

Features & Benefits

Maximum Oven/Chamber Temperature
≤500 deg F (≤260 deg C)
Ignition/Flame Detection
Direct spark/flame sensing port (DS/FS) with selectable port locations
Manifold Pressure Range
1 to 6 in wc (2.5 to 15 mbar)|Nominal ≈4.5 to 5 in wc (≈11.2-12.5 mbar)
Face Temperature Range
1050 to 1650 deg F (565 to 900 deg C)
Combustion Air Flow
205 to 357 SCFH (5.8 to 10.12 m³/h) across 2 to 6 in wc manifold pressure (per head)
Heat Input Range
≈25,000 Btu/hr (≈7.3 kW) per Head
Capacity Range
Max: ≈28,500 Btu/hr (≈8.4 kW) at ~6 in-wc, Min: ≈10,800 Btu/hr (≈3.2 kW) dependent on
Emitter Type
Metal fiber (current); earlier units used metal foam
Burner Type
Full-premix radiant burner delivering high-intensity infrared heat
Modularity
Configurable from 2 to 26 burner heads, depending on type
Model Name
Type 13RM (end-to-end), 25RM (end-to-end), 50RM (side-to-side)
Fuel Type
Natural Gas or Propane
Approvals
Eurasian Customs Union
Material
Durable cast iron body with stainless steel emitter retainers; low-profile design
Low manifold pressures for normal operation
4.5 - 5 wc nominal (11.2 – 12.5 mbar)
  • Spring clips permit tile replacement without tools.
  • Rapid thermal response avoids rotating the head away from the product.

Applications

  • Textile and paper drying
  • Paint drying
  • Powder coating
  • Preheating
  • Plastic forming
  • Heat treatment and annealing

Detailed capabilities

Radiant surface and service arrangement

RadMax uses ceramic or metallic foam tiles held by stainless retainers on a cast-iron body. Spring clips release the tiles without tools, and no wire screen is needed to stabilize the burner face. A combined ignition/sensing port supports direct-spark operation. Rapid heating and cooling reduce the need to move the burner away from the product between heating cycles.

Manufacturer reference ↗

Layout, temperature and retrofit options

The shallow body can mount vertically or horizontally where space is limited. Manifolds can group sections into different widths and lengths, and the page describes retrofit to the named MAXON P/S Radiant II manifold arrangement. Radiant face temperatures, oven/chamber limits and normal manifold pressure are different parameters, not interchangeable temperature ratings. Applications range from textile/paper drying and coatings to forming, heat treatment and annealing.

Manufacturer reference ↗

Features and benefits

  • Spring clips permit tile replacement without tools.
  • Rapid thermal response avoids rotating the head away from the product.

Manufacturer reference ↗

Published application context

  • Textile and paper drying
  • Paint drying
  • Powder coating
  • Preheating
  • Plastic forming
  • Heat treatment and annealing

Manufacturer reference ↗

Technical facts in the product overview

  • Low manifold pressures for normal operation: 4.5 - 5 wc nominal (11.2 – 12.5 mbar)

Manufacturer reference ↗

Specifications

Combustion/Furnace/Chamber Temperatures

Maximum Oven/Chamber Temperature
≤500 deg F (≤260 deg C)
Face Temperature Range
1050 to 1650 deg F (565 to 900 deg C)

Ignition, Flame & Supervision Specifications

Ignition/Flame Detection
Direct spark/flame sensing port (DS/FS) with selectable port locations

Pressure Specifications

Manifold Pressure Range
1 to 6 in wc (2.5 to 15 mbar); Nominal ≈4.5 to 5 in wc (≈11.2-12.5 mbar)

Air & Combustion Air Specifications

Combustion Air Flow
205 to 357 SCFH (5.8 to 10.12 m³/h) across 2 to 6 in wc manifold pressure (per head)

Performance, Flow & Capacity

Heat Input Range
≈25,000 Btu/hr (≈7.3 kW) per Head

Processing & Performance Metrics

Capacity Range
Max: ≈28,500 Btu/hr (≈8.4 kW) at ~6 in-wc, Min: ≈10,800 Btu/hr (≈3.2 kW) dependent on

Measurement & Sensing Characteristics

Emitter Type
Metal fiber (current); earlier units used metal foam

Overview

Burner Type
Full-premix radiant burner delivering high-intensity infrared heat
Model Name
Type 13RM (end-to-end), 25RM (end-to-end), 50RM (side-to-side)

Product Overview & Classification

Modularity
Configurable from 2 to 26 burner heads, depending on type

Fuel, Gas & Media Specifications

Fuel Type
Natural Gas or Propane

Standards & Certifications

Approvals
Eurasian Customs Union

Material Specifications

Material
Durable cast iron body with stainless steel emitter retainers; low-profile design

Technical Specifications

Low manifold pressures for normal operation
4.5 - 5 wc nominal (11.2 – 12.5 mbar)
RadMax® — manufacturer page values
ParameterPublished value / configuration
Maximum Oven/Chamber Temperature≤500 deg F (≤260 deg C)
Face Temperature Range1050 to 1650 deg F (565 to 900 deg C)
Ignition/Flame DetectionDirect spark/flame sensing port (DS/FS) with selectable port locations
Manifold Pressure Range1 to 6 in wc (2.5 to 15 mbar); Nominal ≈4.5 to 5 in wc (≈11.2-12.5 mbar)
Combustion Air Flow205 to 357 SCFH (5.8 to 10.12 m³/h) across 2 to 6 in wc manifold pressure (per head)
Heat Input Range≈25,000 Btu/hr (≈7.3 kW) per Head
Capacity RangeMax: ≈28,500 Btu/hr (≈8.4 kW) at ~6 in-wc, Min: ≈10,800 Btu/hr (≈3.2 kW) dependent on
Emitter TypeMetal fiber (current); earlier units used metal foam
Burner TypeFull-premix radiant burner delivering high-intensity infrared heat
Model NameType 13RM (end-to-end), 25RM (end-to-end), 50RM (side-to-side)
ModularityConfigurable from 2 to 26 burner heads, depending on type
Fuel TypeNatural Gas or Propane
ApprovalsEurasian Customs Union
MaterialDurable cast iron body with stainless steel emitter retainers; low-profile design
Low manifold pressures for normal operation4.5 - 5 wc nominal (11.2 – 12.5 mbar)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
1013RM10-13 RADMAX BurnerRequest quotation
1025RM10-25 RADMAX BurnerRequest quotation
10370834" LMF3 CINCY BLWR,.08HP/+Request quotation
1050RM10-50 RADMAX BurnerRequest quotation
1056590FUEL INLTRequest quotation
1057343BRNR BDYRequest quotation
1057359TILE RETNRequest quotation
1057384SPRG CLIPRequest quotation
1057617TYPE 25/50 BRNR HEAD ASYRequest quotation
1057661TYPE 13 BRNR BDYRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/line-and-duct-burners/radmax

Last source check: 2026-11-02

RadMax Product Image · Manufacturer ownership retained; republication licence not independently confirmed

RadMax Product Image 1 · Manufacturer ownership retained; republication licence not independently confirmed

RadMax Product Image · Site owner attests manufacturer permission; licence not independently audited

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry