Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Line & Duct Burners

HC AIRFLO®

HC AIRFLO is a stainless-steel duct burner for fresh air, recirculated air and suitable turbine-exhaust streams.

HC AIRFLO is a stainless-steel duct burner for fresh air, recirculated air and suitable turbine-exhaust streams. It uses the process stream without separate combustion air and minimizes local pressure loss. Natural gas, hydrogen and mixtures are listed, while other gases require special versions; capacity and temperature figures remain configuration-specific.

Features & Benefits

Sizes
Type M: 4-7.5 ft; Type L: 8-14 ft|Type S: 1-7.5 ft (max duct width 160 in)
Typical Fuel Pressure
Approximately 14.5 psi at nominal capacity (sizes up to 4 ft; higher for longer burners)
Temperature Rating
Downstream typically 1750 deg F (1400 deg F for low‑temp process firing)|Upstream up to 1100 deg F (standard) or 1200 deg F with higher‑grade materials
Oxygen Requirement
Operates with process air oxygen levels down to ~12% when sufficiently preheated
Mounting Options
Slide‑in unit with stainless steel mounting plug and dedicated support; easy installation and service
Minimum Capacity
Down to ~0.68 MBtu/h‑ft for most applications; ~0.50 MBtu/h‑ft for low‑temp (Tin<212 deg F) process firing
Flame Monitoring
UV Scanner connection provided (UV supervision used)
CO/NOx Emissions
Emissions depend on process temperature and O₂ level (consult Eclipse)
Capacity Range
Nominal 5.12 MBtu/h per foot; up to 8.5 MBtu/h per foot possible depending on application boundary conditions
Pressure Drop
Local ΔP across burner as low as ~0.2 in wc
Ignition Type
LVDT/HC pilot burner with ignition; pilot and accessories (ignition transformer, UV) mount on stainless mounting plug
Burner Design
Modular supplementary firing burner
Model Name
HC AIRFLO®
Functions
In‑duct firing line burner; high heat release with clean combustion and low CO/NOx; minimal local ΔP across burner
Fuel Type
Natural Gas, Hydrogen and all mixtures; special versions for Propane, Butane, LPG and Refinery Gases
Material
Stainless Steel
  • Low local pressure loss reduces the air-system burden.

Applications

  • Fresh and recirculated process-air heating
  • Suitable turbine-exhaust firing

Detailed capabilities

Stream-driven combustion and fuel versions

HC AIRFLO uses the process stream without separate combustion-air supply, with stainless construction and a low local pressure drop. The source lists natural gas, hydrogen and mixtures, while propane, butane, LPG and refinery gases require special versions. Upstream temperature, oxygen content and output per burner length are selection conditions; the words '12% or less' in the source do not establish an unlimited lower oxygen capability.

Manufacturer reference ↗

Features and benefits

  • Low local pressure loss reduces the air-system burden.

Manufacturer reference ↗

Published application context

  • Fresh and recirculated process-air heating
  • Suitable turbine-exhaust firing

Manufacturer reference ↗

Specifications

Dimensions & Size Specifications

Sizes
Type M: 4-7.5 ft; Type L: 8-14 ft; Type S: 1-7.5 ft (max duct width 160 in)

Pressure Specifications

Typical Fuel Pressure
Approximately 14.5 psi at nominal capacity (sizes up to 4 ft; higher for longer burners)
Pressure Drop
Local ΔP across burner as low as ~0.2 in wc

Temperature Control/Measurement

Temperature Rating
Downstream typically 1750 deg F (1400 deg F for low‑temp process firing); Upstream up to 1100 deg F (standard) or 1200 deg F with higher‑grade materials

Combustion, Mixing & Fuel Dynamics

Oxygen Requirement
Operates with process air oxygen levels down to ~12% when sufficiently preheated

Installation & Mounting Specifications

Mounting Options
Slide‑in unit with stainless steel mounting plug and dedicated support; easy installation and service

Processing & Performance Metrics

Minimum Capacity
Down to ~0.68 MBtu/h‑ft for most applications; ~0.50 MBtu/h‑ft for low‑temp (Tin<212 deg F) process firing
CO/NOx Emissions
Emissions depend on process temperature and O₂ level (consult Eclipse)
Capacity Range
Nominal 5.12 MBtu/h per foot; up to 8.5 MBtu/h per foot possible depending on application boundary conditions

Ignition, Flame & Supervision Specifications

Flame Monitoring
UV Scanner connection provided (UV supervision used)
Ignition Type
LVDT/HC pilot burner with ignition; pilot and accessories (ignition transformer, UV) mount on stainless mounting plug

Product Design & Configuration

Burner Design
Modular supplementary firing burner

Applications & Compatibility

Applications
Fresh air heating; turbine exhaust gas (TEG) reheating; TEG/AUX combined operation; fluidized bed start‑up; large incinerators

Overview

Model Name
HC AIRFLO®

Control, Logic & Functional Behavior

Functions
In‑duct firing line burner; high heat release with clean combustion and low CO/NOx; minimal local ΔP across burner

Fuel, Gas & Media Specifications

Fuel Type
Natural Gas, Hydrogen and all mixtures; special versions for Propane, Butane, LPG and Refinery Gases

Material Specifications

Material
Stainless Steel
HC AIRFLO® — manufacturer page values
ParameterPublished value / configuration
SizesType M: 4-7.5 ft; Type L: 8-14 ft; Type S: 1-7.5 ft (max duct width 160 in)
Typical Fuel PressureApproximately 14.5 psi at nominal capacity (sizes up to 4 ft; higher for longer burners)
Pressure DropLocal ΔP across burner as low as ~0.2 in wc
Temperature RatingDownstream typically 1750 deg F (1400 deg F for low‑temp process firing); Upstream up to 1100 deg F (standard) or 1200 deg F with higher‑grade materials
Oxygen RequirementOperates with process air oxygen levels down to ~12% when sufficiently preheated
Mounting OptionsSlide‑in unit with stainless steel mounting plug and dedicated support; easy installation and service
Minimum CapacityDown to ~0.68 MBtu/h‑ft for most applications; ~0.50 MBtu/h‑ft for low‑temp (Tin<212 deg F) process firing
CO/NOx EmissionsEmissions depend on process temperature and O₂ level (consult Eclipse)
Capacity RangeNominal 5.12 MBtu/h per foot; up to 8.5 MBtu/h per foot possible depending on application boundary conditions
Flame MonitoringUV Scanner connection provided (UV supervision used)
Ignition TypeLVDT/HC pilot burner with ignition; pilot and accessories (ignition transformer, UV) mount on stainless mounting plug
Burner DesignModular supplementary firing burner
ApplicationsFresh air heating; turbine exhaust gas (TEG) reheating; TEG/AUX combined operation; fluidized bed start‑up; large incinerators
Model NameHC AIRFLO®
FunctionsIn‑duct firing line burner; high heat release with clean combustion and low CO/NOx; minimal local ΔP across burner
Fuel TypeNatural Gas, Hydrogen and all mixtures; special versions for Propane, Butane, LPG and Refinery Gases
MaterialStainless Steel

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
301410BURNER HC-8 W/PLUG&DUOPILOTRequest quotation
301411BURNER HC-8.5 W/PLUG&DUOPILOTRequest quotation
301412BURNER HC-9 W/PLUG&DUOPILOTRequest quotation
301413BURNER HC-9.5 W/PLUG&DUOPILOTRequest quotation
301414BURNER HC-10 W/PLUG&DUOPILOTRequest quotation
301415BURNER HC-10.5 W/PLUG&DUOPILOTRequest quotation
301416BURNER HC-11 W/PLUG&DUOPILOTRequest quotation
301417BURNER HC-11.5 W/PLUG&DUOPILOTRequest quotation
301418BURNER HC-12 W/PLUG&DUOPILOTRequest quotation
301419BURNER HC-12.5 W/PLUG&DUOPILOTRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/line-and-duct-burners/hc-airflo

Last source check: 2026-11-02

HC Airflo Product Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry