Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Direct Fired Furnace Burners

TriOx Burner

TriOx uses three-stage air injection for high-temperature processes including aluminum furnaces, steel reheating and thermal-fluid heaters.

TriOx uses three-stage air injection for high-temperature processes including aluminum furnaces, steel reheating and thermal-fluid heaters. The arrangement targets low NOx and CO while reducing scale or dross in the cited metal applications. It accepts qualified industrial fuel gases with ambient or preheated air and offers several operating modes.

Features & Benefits

Operating Temperature Range
>1600°F (870°C)
Air Supply Pressure Range
13.9 in wc (35 mbar)
Design Optimization Tool
FLUENT® Computational Fluid Dynamics (CFD) software
Air Temperature Options
Ambient Air, Preheated Air
Performance Benefits
Reduced metal loss, scale/dross reduction, visible flame in Invisiflame® mode
Excess Air Operation
5% (low excess air for fuel efficiency)
Gas Supply Pressure
≤ 20 in w.c. (50 mbar)
Flame Supervision
1/2 in UV Scanner Port, 3/4 in UV Scanner Port, None
Connection Type
Single air and single low-pressure gas connection
Air Inlet Sizes
6 in, 8 in, 12 in, 14 in, 16 in
Capacity Range
4.2 to >27 MM Btu/hr (1230 to 7910 kW)
NOx Emissions
≤ 20 ppm
Ignition Type
Direct Spark, IPG Pilot, ZMI Pilot, None
CO Emissions
Low, including on cold start
CFD Modeling
Burner design optimized using FLUENT® CFD software
Firing Mode
Standard, Invisiflame®, Switching between modes
Fuel Type
Clean industrial fuel gas ≥ 500 Btu/ft³ (19.7 MJ/nm³)
  • Staged injection reduces scale or dross in the cited metal applications.
  • Low excess-air operation supports fuel efficiency.

Applications

  • Aluminum furnaces
  • Steel reheating furnaces
  • Thermal-fluid heaters

Detailed capabilities

Staged air and available operating modes

TriOx divides combustion air into three stages to manage NOx and CO while improving the heating process. Standard, switching and Invisiflame-only modes provide different operating arrangements, with direct-spark or pilot ignition. Low excess air supports efficiency, and the source associates the staging with reduced scale/dross in steel and aluminum. The fuel must meet the stated minimum heating value; air may be ambient or preheated as configured.

Manufacturer reference ↗

Features and benefits

  • Staged injection reduces scale or dross in the cited metal applications.
  • Low excess-air operation supports fuel efficiency.

Manufacturer reference ↗

Published application context

  • Aluminum furnaces
  • Steel reheating furnaces
  • Thermal-fluid heaters

Manufacturer reference ↗

Specifications

Overview

Models
TriOx 1000, 2000, 3000, 4000 Series

Operating/Process Temperature Ranges

Operating Temperature Range
>1600°F (870°C)

Air & Combustion Air Specifications

Air Supply Pressure Range
13.9 in wc (35 mbar)
Air Temperature Options
Ambient Air, Preheated Air
Excess Air Operation
5% (low excess air for fuel efficiency)
Air Inlet Sizes
6 in, 8 in, 12 in, 14 in, 16 in

Product Configuration & Options

Design Optimization Tool
FLUENT® Computational Fluid Dynamics (CFD) software
CFD Modeling
Burner design optimized using FLUENT® CFD software

Performance Specifications

Performance Benefits
Reduced metal loss, scale/dross reduction, visible flame in Invisiflame® mode

Pressure Specifications

Gas Supply Pressure
≤ 20 in w.c. (50 mbar)

Ignition, Flame & Supervision Specifications

Flame Supervision
1/2 in UV Scanner Port, 3/4 in UV Scanner Port, None
Ignition Type
Direct Spark, IPG Pilot, ZMI Pilot, None
Firing Mode
Standard, Invisiflame®, Switching between modes

Connections & Interfaces

Connection Type
Single air and single low-pressure gas connection

Processing & Performance Metrics

Capacity Range
4.2 to >27 MM Btu/hr (1230 to 7910 kW)
NOx Emissions
≤ 20 ppm
CO Emissions
Low, including on cold start

Applications & Compatibility

Applications
Aluminum furnaces, steel reheat furnaces, thermal fluid heaters

Fuel, Gas & Media Specifications

Fuel Type
Clean industrial fuel gas ≥ 500 Btu/ft³ (19.7 MJ/nm³)
TriOx Burner — manufacturer page values
ParameterPublished value / configuration
ModelsTriOx 1000, 2000, 3000, 4000 Series
Operating Temperature Range>1600°F (870°C)
Air Supply Pressure Range13.9 in wc (35 mbar)
Air Temperature OptionsAmbient Air, Preheated Air
Excess Air Operation5% (low excess air for fuel efficiency)
Air Inlet Sizes6 in, 8 in, 12 in, 14 in, 16 in
Design Optimization ToolFLUENT® Computational Fluid Dynamics (CFD) software
CFD ModelingBurner design optimized using FLUENT® CFD software
Performance BenefitsReduced metal loss, scale/dross reduction, visible flame in Invisiflame® mode
Gas Supply Pressure≤ 20 in w.c. (50 mbar)
Flame Supervision1/2 in UV Scanner Port, 3/4 in UV Scanner Port, None
Ignition TypeDirect Spark, IPG Pilot, ZMI Pilot, None
Firing ModeStandard, Invisiflame®, Switching between modes
Connection TypeSingle air and single low-pressure gas connection
Capacity Range4.2 to >27 MM Btu/hr (1230 to 7910 kW)
NOx Emissions≤ 20 ppm
CO EmissionsLow, including on cold start
ApplicationsAluminum furnaces, steel reheat furnaces, thermal fluid heaters
Fuel TypeClean industrial fuel gas ≥ 500 Btu/ft³ (19.7 MJ/nm³)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
101028461KIT,LIT,TRIPLE AIR STAGED ULTRA LO NOX BRequest quotation
HK10862BRNG ASSY,ADJ LVRRequest quotation
HK1781LVR,RLA HVY DUTY ADJ 96242 12FT 24PCSRequest quotation
HK200071X72.000PKG,1/4DIA BRDD ROPE X 72 LRequest quotation
HK20094BRNG,ROD END HEIM HF6C OR EQ NTNL ROD ENRequest quotation
HK300604FLG,WN,3,150 W/GASKETRequest quotation
HK300605FLG,WN,4,150 W/GASKETRequest quotation
HK401814INSLN INS,TRIOX2008 BRNR BKPLT CRMC FBRRequest quotation
HK401816INSLN INS,TRIOX2008 AIR INLT CRMC FBR 23Request quotation
HK401850TB ASSY,TRIOX1008 2008 AIR SEPARATINGRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/direct-fired-furnace-burners/triox-burner

Last source check: 2026-11-02

Triple Air Staged Ultra Low Nox Burner · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry