Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Direct Fired Furnace Burners

Annular excess air burners

These annular-gap excess-air burners combine a cast-steel body with a ceramic-tube connection.

These annular-gap excess-air burners combine a cast-steel body with a ceramic-tube connection. Sizes 65 and 100 cover the published 50–200 kW range using natural gas, town gas or LPG. Air and fuel connections are threaded, while tube length depends on the ceramic tube; an integrated lance is available.

Features & Benefits

Air Supply Pressure Range
Approximately 10 to 30 mbar
Viewing Head Dimensions
Length: 20.25 in (514 mm); Diameter: 3 in (76 mm)
Flame Temperature Range
50 to 1500 deg C
Steel Extension Length
0 to 150 mm (custom lengths available)
Secondary Air Pressure
25 to 70 mbar
Kiln Temperature Range
50 to 1450 deg C (up to 1600 deg C on request)
Flame Outlet Velocity
Medium to high (up to 145 m/s depending on model)
Excess Air Capability
Up to λ = 50
Ceramic Tube Material
SiC (Si-1500), max temp 1500 deg C
Air Temperature Range
BIC: up to 450 deg C|BICA: up to 250 deg C
Visible Flame Length
15 to 80 cm depending on model
Maintenance Interval
Twice per year (more frequent if media is contaminated)
Cooling Requirements
Varies with furnace temp; cooling air at 20 deg C or 450 deg C
Ceramic Tube Length
250 or 300 mm
Gas Pressure Range
Approximately 10 to 40 mbar
Mounting Types
Any position; connections rotatable in 90 deg steps
Ignition Type
Pilot ignition or direct ignition (configuration‑dependent)
Flame Control
Ionisation electrode or optional UV sensor
Control Range
Approximately 1:10 (modulating or staged)
Output Range
15 to 360 kW
Flame Shapes
Short (R), Long (H)
Burner Sizes
65, 100, 140
Approvals
WEEE Directive 2012/19/EU - Waste Electrical and Electronic Equipment Directive
Material
Single-Piece Aluminum Extrusion Air/Gas Body
Gas Type
Natural gas (L/H), Propane, Butane, LPG
Burner size
65 and 100
Capacity
50 to 200 kW

Applications

  • Excess-air furnace firing

Specifications

Overview

Models
APX Burner Line Burner

Air & Combustion Air Specifications

Air Supply Pressure Range
Approximately 10 to 30 mbar
Excess Air Capability
Up to λ = 50
Air Temperature Range
BIC: up to 450 deg C; BICA: up to 250 deg C

Dimensions & Weight

Viewing Head Dimensions
Length: 20.25 in (514 mm); Diameter: 3 in (76 mm)

Combustion/Furnace/Chamber Temperatures

Flame Temperature Range
50 to 1500 deg C
Kiln Temperature Range
50 to 1450 deg C (up to 1600 deg C on request)

Dimensions & Length Specifications

Steel Extension Length
0 to 150 mm (custom lengths available)
Ceramic Tube Length
250 or 300 mm

Pressure Specifications

Secondary Air Pressure
25 to 70 mbar
Gas Pressure Range
Approximately 10 to 40 mbar

Ignition, Flame & Supervision Specifications

Flame Outlet Velocity
Medium to high (up to 145 m/s depending on model)
Cooling Requirements
Varies with furnace temp; cooling air at 20 deg C or 450 deg C
Ignition Type
Pilot ignition or direct ignition (configuration‑dependent)
Flame Control
Ionisation electrode or optional UV sensor
Flame Shapes
Short (R), Long (H)

Material Specifications

Ceramic Tube Material
SiC (Si-1500), max temp 1500 deg C
Material
Single-Piece Aluminum Extrusion Air/Gas Body

Burner/Flame‑Related Lengths

Visible Flame Length
15 to 80 cm depending on model

Electrical Specifications

Maintenance Interval
Twice per year (more frequent if media is contaminated)

Installation & Mounting Specifications

Mounting Types
Any position; connections rotatable in 90 deg steps

Control, Logic & Functional Behavior

Control Range
Approximately 1:10 (modulating or staged)

Inputs, Outputs & Signal Interfaces

Output Range
15 to 360 kW

Dimensions & Size Specifications

Burner Sizes
65, 100, 140

Applications & Compatibility

Applications
Fresh air and low‑temperature recirculating air heating; Make‑up air systems, spray booths, ovens, dryers, paper, food, gypsum, paint shops

Standards & Certifications

Approvals
WEEE Directive 2012/19/EU - Waste Electrical and Electronic Equipment Directive

Fuel, Gas & Media Specifications

Gas Type
Natural gas (L/H), Propane, Butane, LPG

Technical Specifications

Burner size
65 and 100
Capacity
50 to 200 kW
Annular excess air burners — manufacturer page values
ParameterPublished value / configuration
ModelsAPX Burner Line Burner
Air Supply Pressure RangeApproximately 10 to 30 mbar
Excess Air CapabilityUp to λ = 50
Air Temperature RangeBIC: up to 450 deg C; BICA: up to 250 deg C
Viewing Head DimensionsLength: 20.25 in (514 mm); Diameter: 3 in (76 mm)
Flame Temperature Range50 to 1500 deg C
Kiln Temperature Range50 to 1450 deg C (up to 1600 deg C on request)
Steel Extension Length0 to 150 mm (custom lengths available)
Ceramic Tube Length250 or 300 mm
Secondary Air Pressure25 to 70 mbar
Gas Pressure RangeApproximately 10 to 40 mbar
Flame Outlet VelocityMedium to high (up to 145 m/s depending on model)
Cooling RequirementsVaries with furnace temp; cooling air at 20 deg C or 450 deg C
Ignition TypePilot ignition or direct ignition (configuration‑dependent)
Flame ControlIonisation electrode or optional UV sensor
Flame ShapesShort (R), Long (H)
Ceramic Tube MaterialSiC (Si-1500), max temp 1500 deg C
MaterialSingle-Piece Aluminum Extrusion Air/Gas Body
Visible Flame Length15 to 80 cm depending on model
Maintenance IntervalTwice per year (more frequent if media is contaminated)
Mounting TypesAny position; connections rotatable in 90 deg steps
Control RangeApproximately 1:10 (modulating or staged)
Output Range15 to 360 kW
Burner Sizes65, 100, 140
ApplicationsFresh air and low‑temperature recirculating air heating; Make‑up air systems, spray booths, ovens, dryers, paper, food, gypsum, paint shops
ApprovalsWEEE Directive 2012/19/EU - Waste Electrical and Electronic Equipment Directive
Gas TypeNatural gas (L/H), Propane, Butane, LPG
Burner size65 and 100
Capacity50 to 200 kW

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/direct-fired-furnace-burners/annular-excess-air-burners

Last source check: 2026-11-02

Annular excess air burner · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry