Industrial Flame Monitoring Accessories
Industrial flame-monitoring accessories support the positioning, wiring, cooling and demonstration of compatible monitoring systems.
Industrial flame-monitoring equipment combines viewing heads, signal processors, configuration tools and mounting accessories.

Industrial flame-monitoring accessories support the positioning, wiring, cooling and demonstration of compatible monitoring systems.
S650 viewing heads pair UV and IR sensing with P650 processors for single- or multiple-burner flame monitoring.
P650 supervises as many as three S650 viewing heads, with separate UV and IR flame counts and independent channel relays.
U2-S combines flame viewing and signal processing in one unit, reducing separate cabinet equipment and wiring.
Watchdog III monitors flare flames from ground-mounted equipment, including difficult outdoor conditions.
S55XBE heads work with P522, P531 and P532 processors and offer UV, IR or combined sensing.
P531/P532 supports simultaneous monitoring using two S55XBE heads and one S70X head.
P522 supervises two switched S55XBE viewing heads with separate sensor-gain adjustment and selectable infrared flicker settings.
The 600U processor detects flame through rectified current at a flame rod, energizing its relay above the selected threshold.
S70X/S80X viewing heads pair with 700, P531 or P532 processors for single-fuel monitoring where extensive discrimination is unnecessary.
700SP provides single-channel, self-checking supervision with S70X/S80X viewing heads.
GHE igniters use staged ignition and internal mixing for continuous gas-ignition duty.
FASA extends the optical path between a flame and its viewing head where direct sighting or temperature conditions prevent normal mounting.
Thermalsoft software and the FlameTools touchscreen support remote setup, observation and diagnostics across networks of flame processors.
Last source check: 2026-11-02
Industrial Flame Monitoring (IFM) · Manufacturer ownership retained; republication licence not independently confirmed
Industrial Flame Monitoring (IFM) · Manufacturer ownership retained; republication licence not independently confirmed
Industrial Flame Monitoring (IFM) · Manufacturer ownership retained; republication licence not independently confirmed
Industrial Flame Monitoring (IFM) · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Tell us about your facility and what you need to achieve.