Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Industrial Flame Monitoring (IFM)

FASA Glass and Quartz Fiber Optics

FASA extends the optical path between a flame and its viewing head where direct sighting or temperature conditions prevent normal mounting.

FASA extends the optical path between a flame and its viewing head where direct sighting or temperature conditions prevent normal mounting. Glass fibers address oil and coal flames; quartz addresses all fuel types. Custom carriers, lenses and purge adapters adapt the assembly to the burner and required viewing angle.

Features & Benefits

Cooling/Purge Air Option
10 SCFM at 10 in WC (0.25 m³/min at 25.4 mm WC)|Oil and moisture-free, < 40 deg C
Viewing Head Connection
1/2 in NPT on viewing head flange (model dependent)
Transmission Distance
Up to 25 feet (approximately 8 meters)
Environmental Rating
NEMA 4X (IP56), lens end sealed for hazardous locations
Mounting Dimensions
3 in NPT mounting via 3 locking screws|Outer carrier: 3.375 in OD x 9 in long
Temperature Rating
-40 to +662 deg F (-40 to +350 deg C)
Construction
Corrosion-resistant stainless steel
Functions
Extends flame detector viewing capability in hostile or obstructed environments
  • Optical extension permits sensing where direct head mounting is impractical.

Applications

  • Indirect flame viewing where access or temperature prevents direct head installation

Detailed capabilities

Extending the optical path

The fiber system places the viewing head away from a difficult sighting location while carrying flame radiation to the sensor. This addresses inaccessible geometry, temperatures beyond the head rating or a need to observe closer to the flame. Glass fiber is described for oil/coal monitoring, whereas quartz serves the full stated fuel range. Transmission distance depends on the application, so it is not a universal cable-length rating.

Manufacturer reference ↗

Custom carriers, lenses and connections

An assembly may combine a fiber bundle with inner and outer carriers, using rigid sections, flexible sections or both. Stainless construction and layered protection address heat, vibration and corrosion. The FOLC-SC lens looks straight ahead; FOLC-9C provides the stated nine-degree offset. Purged or unpurged viewing-end adapters and half- or one-inch NPT head connections adapt the assembly. Compatibility includes Honeywell processors and the U2 integrated head arrangement named in the source.

Manufacturer reference ↗

Features and benefits

  • Optical extension permits sensing where direct head mounting is impractical.

Manufacturer reference ↗

Published application context

  • Indirect flame viewing where access or temperature prevents direct head installation

Manufacturer reference ↗

Specifications

Air & Combustion Air Specifications

Cooling/Purge Air Option
10 SCFM at 10 in WC (0.25 m³/min at 25.4 mm WC); Oil and moisture-free, < 40 deg C

Connections & Interfaces

Viewing Head Connection
1/2 in NPT on viewing head flange (model dependent)

Inputs, Outputs & Interface Signals

Transmission Distance
Up to 25 feet (approximately 8 meters)

Environmental Conditions

Environmental Rating
NEMA 4X (IP56), lens end sealed for hazardous locations

Dimensions & Weight

Mounting Dimensions
3 in NPT mounting via 3 locking screws; Outer carrier: 3.375 in OD x 9 in long

Temperature Control/Measurement

Temperature Rating
-40 to +662 deg F (-40 to +350 deg C)

Product Overview & Classification

Construction
Corrosion-resistant stainless steel

Applications & Compatibility

Applications
Tilting burners (±30 deg movement), Low NOx coal burners, Gas and oil-fired turbine generators, Situations with obstructed flame view or high vibration/temperature, Corner-fired units with parallel fuel flow

Control, Logic & Functional Behavior

Functions
Extends flame detector viewing capability in hostile or obstructed environments
FASA Glass and Quartz Fiber Optics — manufacturer page values
ParameterPublished value / configuration
Cooling/Purge Air Option10 SCFM at 10 in WC (0.25 m³/min at 25.4 mm WC); Oil and moisture-free, < 40 deg C
Viewing Head Connection1/2 in NPT on viewing head flange (model dependent)
Transmission DistanceUp to 25 feet (approximately 8 meters)
Environmental RatingNEMA 4X (IP56), lens end sealed for hazardous locations
Mounting Dimensions3 in NPT mounting via 3 locking screws; Outer carrier: 3.375 in OD x 9 in long
Temperature Rating-40 to +662 deg F (-40 to +350 deg C)
ConstructionCorrosion-resistant stainless steel
ApplicationsTilting burners (±30 deg movement), Low NOx coal burners, Gas and oil-fired turbine generators, Situations with obstructed flame view or high vibration/temperature, Corner-fired units with parallel fuel flow
FunctionsExtends flame detector viewing capability in hostile or obstructed environments

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
50107568-001FO ADPT BDY LENSRequest quotation
FASAFIBER OPTIC VH EXTENSION ASSEMBLYRequest quotation
FASA-INTFIBER OPTIC INTERNAL EXTENSION ASSEMBLYRequest quotation
FOLC-9CFIBER OPTIC LENS CARTR/COUPLR (9 DEGR)Request quotation
FOLC-HS.5"NPT CONN FO LENS CARTRequest quotation
FOLC-SCFIBER OPTIC LENS CARTR/COUPLR (STRAIGHT)Request quotation
S550FOADFIBER OPTICS FOR S55XB/BERequest quotation
S550FOADY-FTFIBER OPTICS W.AIRPURGE FOR S55XB/BERequest quotation
S592-PCFIBER ASSY QRTZ LENS FOR S592/S593Request quotation
S592-PPPLANO/PLANO WINDOW FOR S592/S593Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burner-management-systems/industrial-flame-monitoring-ifm/fasa-glass-and-quartz-fiber-optics

Last source check: 2026-11-02

lens1_sml · Manufacturer ownership retained; republication licence not independently confirmed

foad_sml · Manufacturer ownership retained; republication licence not independently confirmed

lens3x_sml · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry