Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

pH/ORP

HPW7000 pH Measurement System

HPW7000 is an electrode and flow-chamber assembly for pH monitoring in high-purity water.

HPW7000 is an electrode and flow-chamber assembly for pH monitoring in high-purity water. Its compact stainless-steel chamber controls sample flow around the measuring and reference electrodes, with temperature sensing included. A flowing reference and shielded cabling support stable measurements in low-conductivity samples, making the system suitable for crowded power-station water-chemistry sampling panels.

Models: HPW7000

Features & Benefits

Construction
Stainless-steel flow chamber and flowing reference
  • Supports stable high-purity-water pH readings

Applications

  • Power-generation water chemistry

Detailed capabilities

What Is It?

HPW7000 measures pH in high-purity water using a compact flowing-reference assembly suitable for sample panels. It interfaces with UDA2182 or DirectLine. The page states a low-conductivity threshold using '<10 mmho/cm'; that unusual source unit is retained as a documentation qualification rather than silently converting it to a different conductivity unit.

Manufacturer reference ↗

How Does It Work?

A stainless flow chamber shapes sample flow around the measuring/reference electrodes, temperature sensor and solution ground. Keyed cover geometry fixes electrode placement after service, while a clamp permits removal and reinstallation. Shielded leads up to 36 feet avoid a mounting-point preamplifier in the described arrangement, and the flowing reference limits offset during calibration.

Manufacturer reference ↗

What Problems Does It Solve?

Low-conductivity water is prone to noise, streaming potentials and drift that complicate conventional pH measurement. Controlled sample flow, shielding and repeatable electrode placement address those effects, supporting stable turbine-water chemistry monitoring. The compact mounting saves panel space and simplifies calibration without claiming immunity to all sampling or wiring errors.

Manufacturer reference ↗

Specifications

Environmental Conditions

Downstream Back Pressure
-10 in W.C. (min), +1 in W.C. (max)
Conductivity Range
>0.055 umhos
Temperature Range
Assembly: 10 to 45 deg C; Electrodes: 10 to 80 deg C
Measurement Range
pH: 4 to 10
Resistivity
18 megohms-cm (demonstrates system stability at high purity)
Stability
± 0.1 pH per week

Technical Specifications

Process Connections
1/4 in Male, Side mounted on flow assembly

Processing & Performance Metrics

Accuracy/Noise
± 0.1 pH/< 0.1 pH

Applications & Compatibility

Applications
Measurement and control of water pH to minimize corrosion and scaling in electric utilities, cogeneration, industrial boilers, and steam generators
HPW7000 pH Measurement System — manufacturer page values
ParameterPublished value / configuration
Downstream Back Pressure-10 in W.C. (min), +1 in W.C. (max)
Conductivity Range>0.055 umhos
Temperature RangeAssembly: 10 to 45 deg C; Electrodes: 10 to 80 deg C
Measurement RangepH: 4 to 10
Resistivity18 megohms-cm (demonstrates system stability at high purity)
Stability± 0.1 pH per week
Process Connections1/4 in Male, Side mounted on flow assembly
Accuracy/Noise± 0.1 pH/< 0.1 pH
ApplicationsMeasurement and control of water pH to minimize corrosion and scaling in electric utilities, cogeneration, industrial boilers, and steam generators

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

4 parts

Part NumberDescriptionEnquiry
50024077-501SANITARY CLAMP, 2.5" HPW7000Request quotation
50044238-501ORP ELECTRODE 20' CABLERequest quotation
50044238-502ORP ELECTRODE 36' CABLERequest quotation
HPW7001HPW7001-HI-PURITY PH MEASUREMENT SYSTEMRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/process-instruments/analytical-instruments-and-sensors/ph-orp/hpw7000-ph-measurement-system

Last source check: 2026-11-02

HPW7000 pH Measurement System Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry