Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

pH/ORP

DL2000 Meredian Glass Mountings

DL2000 combines a Meredian glass pH electrode, reference and temperature sensor in one body for light-industrial measurement.

DL2000 combines a Meredian glass pH electrode, reference and temperature sensor in one body for light-industrial measurement. Used with DirectLine pH electronics, it supports threaded in-line or immersion installation and remote cable arrangements. The source describes a compact field-measurement approach with a local interface, reducing the need for a dedicated panel installation.

Models: DL2000

Features & Benefits

Sensor construction
Combined glass pH, reference and temperature elements
  • Supports field installation without a panel-mounted analyzer

Applications

  • Light-industrial in-line and immersion pH measurement

Detailed capabilities

What Is It?

DL2000 combines a glass pH sensor, reference and temperature element with the DL421 DirectLine module for light-industrial service. Inline or submerged arrangements are described. The module has a local HMI and a sealed corrosion-resistant enclosure for dusty/moist environments, with the source's intrinsic-safety statement applying to the specified transmitter arrangement rather than every possible assembled loop.

Manufacturer reference ↗

How Does It Work?

The single-body electrode fits process pipework directly or through the stated three-quarter-inch fittings. The electrode cable is sealed at the probe, while the remote connection uses the named IP68 connector. Local module access permits setup and calibration without a separate panel-mounted analyzer, reducing the amount of panel and cable construction.

Manufacturer reference ↗

What Problems Does It Solve?

Glass-pH measurement supports reagent and product-quality control with a compact DirectLine installation. Modular mounting reduces design and service work, while the local interface shortens calibration tasks. Material, temperature and hazardous-installation requirements still follow the selected sensor/module combination despite the general low-cost and easy-maintenance description.

Manufacturer reference ↗

Specifications

Redundancy & Synchronization

Cable
Integral 20 ft length

Technical Specifications

Temperature Compensator
8550 ohm Thermistor

Environmental Conditions

Temperature Rating
0 to 65 deg C (32 to 149 deg F)
Pressure Ratings
4.8 bar (70 psig)
pH Range
0 to 14 pH

Mechanical & Physical Properties

Wetted Materials
Body: Ryton, Sensor: Glass, Reference Junction: Porous HDPE

Dimensions & Weight

Dimensions
25.4 mm body (1 in), 120.6 mm length (4.75 in)

Applications & Compatibility

Mounting
3/4 in MNPT Thread
DL2000 Meredian Glass Mountings — manufacturer page values
ParameterPublished value / configuration
CableIntegral 20 ft length
Temperature Compensator8550 ohm Thermistor
Temperature Rating0 to 65 deg C (32 to 149 deg F)
Pressure Ratings4.8 bar (70 psig)
pH Range0 to 14 pH
Wetted MaterialsBody: Ryton, Sensor: Glass, Reference Junction: Porous HDPE
Dimensions25.4 mm body (1 in), 120.6 mm length (4.75 in)
Mounting3/4 in MNPT Thread

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Manufacturer sources

https://process.honeywell.com/us/en/products/process-instruments/analytical-instruments-and-sensors/ph-orp/dl2000-meredian-glass-mountings

Last source check: 2026-11-02

DL2000 Meredian Glass Mountings Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry