Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

pH/ORP

7777DVP Immersion/In-Line Mounting

7777DVP packages a Durafet III solid-state pH electrode with temperature compensation and a waterproof Vario Pin connector.

7777DVP packages a Durafet III solid-state pH electrode with temperature compensation and a waterproof Vario Pin connector. Threaded or immersion arrangements adapt it to process installations, avoiding the fragile glass sensing element used by conventional electrodes. Honeywell identifies wastewater, neutralization and cooling towers among the duties where the assembly supplies fast pH response.

Features & Benefits

Sensor
Durafet III ISFET
Connector
Waterproof Vario Pin
  • Avoids fragile glass sensing elements

Applications

  • Wastewater
  • Neutralization
  • Cooling towers
  • Process pH

Detailed capabilities

What Is It?

7777DVP combines Durafet III non-glass pH sensing, reference and automatic temperature compensation in a Ryton body. A waterproof Vario Pin disconnect supports installation and maintenance. Published applications include wastewater inlet/outlet, neutralization, cooling towers and general process pH, with inline or immersion mounting appropriate to the selected assembly.

Manufacturer reference ↗

How Does It Work?

The ISFET replaces the fragile glass sensing element and supplies a low-impedance signal, including at low temperature. The electrode can be immersed or fitted through a three-quarter-inch threaded connection. A replaceable reference frit/gel extends service life, while compact construction avoids additional special seals. Compatibility wording remains subject to interfacing the sensor correctly with the existing pH instrumentation.

Manufacturer reference ↗

What Problems Does It Solve?

Durable non-glass construction reduces breakage-related replacement, and the disconnect makes service easier. Fast, stable pH response supports reagent control and product quality with less maintenance. The stated lack of sodium error or ORP interference belongs to this sensing arrangement, not a claim that process contamination, wiring or calibration can never affect the installed measurement.

Manufacturer reference ↗

Specifications

Technical Specifications

Electrical Connections
Vario Pin, 11 conductor connector, IP68 rated (33 ft immersion for 1000 hrs)

Mechanical & Physical Properties

Compatible Electrodes
Durafet III pH Electrodes (ISFET Solid-State, Non-Glass)
Wetted Materials
Ryton Body, Silicon ISFET Die, Ceramic Reference Junction, Viton Media Seal, Nickel Plated Brass, EPM Reference Frit Seals

Environmental Conditions

Temperature Rating
Cap Adapter Cable: 0 to 70 deg C (32 to 158 deg F); Electrode: -10 to 110 deg C (14 to 230 deg F)
Pressure Ratings
345 kPa (50 psig) at 100 deg C (212 deg F); 690 kPa (100 psig) at 50 deg C (122 deg F)
Operating Range
0 to 14 pH

I/O Capabilities

Mounting Types
Immersion (Submersion) or In-Line (3/4 in MNPT Process Connection)

Network & Connectivity Infrastructure

Cable Options
DirectLine Remote (20’/50’), Cap Adapter (20’/50’), Preamp (20’/50’), UDA2182 (20’/50’)

Applications & Compatibility

Applications
Wastewater Influent/Effluent, Neutralization, Cooling Towers, Process pH Measurements

Dimensions & Weight

Dimensions
220 x 27 mm Diameter (8.65 x 1.05 in)
7777DVP Immersion/In-Line Mounting — manufacturer page values
ParameterPublished value / configuration
Electrical ConnectionsVario Pin, 11 conductor connector, IP68 rated (33 ft immersion for 1000 hrs)
Compatible ElectrodesDurafet III pH Electrodes (ISFET Solid-State, Non-Glass)
Wetted MaterialsRyton Body, Silicon ISFET Die, Ceramic Reference Junction, Viton Media Seal, Nickel Plated Brass, EPM Reference Frit Seals
Temperature RatingCap Adapter Cable: 0 to 70 deg C (32 to 158 deg F); Electrode: -10 to 110 deg C (14 to 230 deg F)
Pressure Ratings345 kPa (50 psig) at 100 deg C (212 deg F); 690 kPa (100 psig) at 50 deg C (122 deg F)
Operating Range0 to 14 pH
Mounting TypesImmersion (Submersion) or In-Line (3/4 in MNPT Process Connection)
Cable OptionsDirectLine Remote (20’/50’), Cap Adapter (20’/50’), Preamp (20’/50’), UDA2182 (20’/50’)
ApplicationsWastewater Influent/Effluent, Neutralization, Cooling Towers, Process pH Measurements
Dimensions220 x 27 mm Diameter (8.65 x 1.05 in)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗
Manufacturer sources

https://process.honeywell.com/us/en/products/process-instruments/analytical-instruments-and-sensors/ph-orp/7777dvp-immersion-in-line-mounting

Last source check: 2026-11-02

7777DVP Immersion/In-Line Mounting · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry