Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

pH/ORP

Durafet pH Sensor

Durafet measures pH with an ISFET sensing element instead of a glass membrane.

Durafet measures pH with an ISFET sensing element instead of a glass membrane. Its one-piece electrode combines reference measurement and temperature compensation within a chemically resistant body, with industrial and sanitary arrangements available. Connector choices differ between Durafet generations, and compatible Honeywell analyzers or DirectLine modules provide a complete measurement path for process and food applications.

Models: Durafet III, Durafet II

Features & Benefits

Technology
Non-glass ISFET
Variants
Industrial and sanitary designs
  • Resists sensor breakage and supports fast response

Applications

  • Neutralization and reagent control
  • Food and dairy
  • Industrial pH

Detailed capabilities

What Is It?

Durafet uses an ISFET pH element with reference and automatic temperature compensation in a chemically resistant Ryton body. Industrial and sanitary versions address different duties, with a sanitary Durafet III form for food/dairy. Durafet III uses Vario Pin while Durafet II uses the stated board connector, so connectors must not be generalized across generations.

Manufacturer reference ↗

How Does It Work?

A solid-state low-impedance signal provides rapid response without relying on a fragile glass bulb. Designs include threaded inline/immersion forms and a 12 mm Durafet II electrode for specific mounts. Disconnects prevent cable twisting during replacement, and the frit/gel reference can be renewed. The source's up-to-ten-times response comparison is not an absolute time guarantee.

Manufacturer reference ↗

What Problems Does It Solve?

Resistance to ordinary-use breakage reduces spare and replacement requirements. Stability and faster response can reduce calibration effort, reagent use and control lag. The published experience duration is historical source wording rather than a current product-age calculation. Compatibility includes the named Honeywell analyzers/modules, subject to the appropriate generation and interface.

Manufacturer reference ↗

Specifications

Overview

Models
Durafet III (Vario Pin Quick Disconnect), Durafet II (PC Board Connector, 12 mm diameter)

I/O Capabilities

Mounting Compatibility
Compatible with 7777DVP, DirectLine (integral/remote), 7777D, 7774D (SS/CPVC), 7773D, 7758D mountings
Mounting Options
3/4 in MNPT Threaded (In-Line or Immersion), 12 mm Diameter (Durafet II only)

Technical Specifications

Electrical Connections
Durafet II: PC Board Connector; Durafet III: Vario Pin, 11 Conductor Connector, IP68 Rated

Environmental Conditions

Temperature Sensors
8550 ohm Thermistor and 1000 ohm RTD
Temperature Rating
-10 to 110 deg C (130 deg C for Intermittent Sterilizations)
Pressure Ratings
345 kPa (50 psig) at 100 deg C; 690 kPa (100 psig) at 50 deg C
Operating Range
0 to 14 pH

Mechanical & Physical Properties

Wetted Materials
Ryton Body, Silicon ISFET Die, Ceramic Reference Junction, Viton Media Seal, EPM Reference Frit Seals

Network & Connectivity Infrastructure

Cable Options
DirectLine Remote Cable (20’/50’), Cap Adapter (20’/50’), Preamp Cables (20’/50’)

Applications & Compatibility

Sensor Type
Non-Glass, Solid-State pH Electrode using ISFET (Ion Sensitive Field Effect Transistor) Technology
Durafet pH Sensor — manufacturer page values
ParameterPublished value / configuration
ModelsDurafet III (Vario Pin Quick Disconnect), Durafet II (PC Board Connector, 12 mm diameter)
Mounting CompatibilityCompatible with 7777DVP, DirectLine (integral/remote), 7777D, 7774D (SS/CPVC), 7773D, 7758D mountings
Mounting Options3/4 in MNPT Threaded (In-Line or Immersion), 12 mm Diameter (Durafet II only)
Electrical ConnectionsDurafet II: PC Board Connector; Durafet III: Vario Pin, 11 Conductor Connector, IP68 Rated
Temperature Sensors8550 ohm Thermistor and 1000 ohm RTD
Temperature Rating-10 to 110 deg C (130 deg C for Intermittent Sterilizations)
Pressure Ratings345 kPa (50 psig) at 100 deg C; 690 kPa (100 psig) at 50 deg C
Operating Range0 to 14 pH
Wetted MaterialsRyton Body, Silicon ISFET Die, Ceramic Reference Junction, Viton Media Seal, EPM Reference Frit Seals
Cable OptionsDirectLine Remote Cable (20’/50’), Cap Adapter (20’/50’), Preamp Cables (20’/50’)
Sensor TypeNon-Glass, Solid-State pH Electrode using ISFET (Ion Sensitive Field Effect Transistor) Technology

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

10 parts

Part NumberDescriptionEnquiry
31079244-501RETAINER ASSEMBLYRequest quotation
31086303-502DURAFET II SUPPORT TUBERequest quotation
31103001-5014.01 BUFFER SOLUTION KITRequest quotation
31103002-5016.86 BUFFER SOLUTION KITRequest quotation
31103003-5019.18 BUFFER SOLUTION KITRequest quotation
31120167-501TEE 3/4 INCH PLASTIC PIPERequest quotation
50001391-501UDA2182 CABLE 20' DURAFET IIIRequest quotation
50001391-502SQ-01835 UDA2182 CABLE 50 FT DURRequest quotation
50001623-502REMOTE PREAMP CABLE 50'Request quotation
50005631-501SQ-01840 UDA2182 CABLE 20 FT DURRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/process-instruments/analytical-instruments-and-sensors/ph-orp/durafet-ph-sensor

Last source check: 2026-11-02

Durafet pH Sensor Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry