Conductivity
CCD Contacting Conductivity Sensors
CCD conductivity cells measure liquid resistance using electrodes and an integrated temperature compensator.
CCD conductivity cells measure liquid resistance using electrodes and an integrated temperature compensator. PES bodies support corrosion resistance, with titanium or graphite electrodes associated with different cell constants. In-line and flow-through arrangements place the sensing elements in the process stream, providing continuous conductivity information for industrial-water duties with differing measurement ranges.
Features & Benefits
- Cell constants
- 0.01, 0.1, 1.0 and 10.0
- Supports continuous measurement with temperature compensation
Applications
- Industrial water conductivity
Detailed capabilities
What Is It?
CCD contacting cells use PES bodies for industrial electrolytic-conductivity measurement. Titanium serves the 0.01/0.1 constants and graphite the 1.0/10.0 constants. Inline or flow-through mounting provides several process arrangements, with electrode and temperature-sensor exposure maintained in the stream. The source gives 140°C and 250 psig limits for this family.
How Does It Work?
Solution resistance is measured with the electrodes while the compensator follows temperature. An inline cell fits a separately supplied three-quarter-inch tee or bypass; a flow-through cell uses its chamber. Keeping both sensing elements immersed helps track concentration and temperature changes together, rather than applying a fixed temperature correction unrelated to the stream.
What Problems Does It Solve?
Selectable constants and rugged bodies make the cell useful for high-purity water and other industrial water processes. The mounting options simplify installation and replacement while supporting repeatable conductivity data. The page does not extend the sanitary 4974 connection options or the DL4000 electrode-material mapping to CCD by family resemblance.
Communication & Protocols
- Cell Constants Supported
- Various cell constants available, covering 0.01 to 10,000 µS/cm
Technical Specifications
- Wiring Connections
- 4-lead cable for direct connection to analyzers (e.g., UDA2182), quick disconnect, or junction box options
Environmental Conditions
- Temperature Rating
- Up to 140 deg C (284 deg F)
- Temperature Compensator
- 8550 Thermistor (xxT) or 1000 Ohm RTD (xxR); ATC (Automatic Temperature Compensator) Standard
- Pressure Ratings
- Up to 250 psi (1724 kPa)
- Operating Range
- Depends on cell constant, from 0.01 to 10,000 µS/cm
Applications & Compatibility
- Sensor Type
- Contacting conductivity sensor for industrial water applications
I/O Capabilities
- Mounting Options
- Inline (3/4 in MNPT), Immersion (3/4 in MNPT), Flow-Through (with Optional Pipe Tee)
Mechanical & Physical Properties
- Electrode Materials
- Titanium (ATx, BTx, CTx), Carbon Graphite and Teflon (DCx)
| Parameter | Published value / configuration |
|---|---|
| Cell Constants Supported | Various cell constants available, covering 0.01 to 10,000 µS/cm |
| Wiring Connections | 4-lead cable for direct connection to analyzers (e.g., UDA2182), quick disconnect, or junction box options |
| Temperature Rating | Up to 140 deg C (284 deg F) |
| Temperature Compensator | 8550 Thermistor (xxT) or 1000 Ohm RTD (xxR); ATC (Automatic Temperature Compensator) Standard |
| Pressure Ratings | Up to 250 psi (1724 kPa) |
| Operating Range | Depends on cell constant, from 0.01 to 10,000 µS/cm |
| Sensor Type | Contacting conductivity sensor for industrial water applications |
| Mounting Options | Inline (3/4 in MNPT), Immersion (3/4 in MNPT), Flow-Through (with Optional Pipe Tee) |
| Electrode Materials | Titanium (ATx, BTx, CTx), Carbon Graphite and Teflon (DCx) |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published part numbers
2 parts
| Part Number | Description | Enquiry |
|---|---|---|
| ASC-CCD20 | CCD QD 20 ft Cable | Request quotation |
| ASC-CCD50 | CCD QD 50 ft Cable | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HPS and SETS Spare Parts SKU Image 17 · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
