Conductivity
5000TC Toroidal Conductivity Sensor
5000TC measures conductivity inductively without exposed contacting electrodes.
5000TC measures conductivity inductively without exposed contacting electrodes. The toroidal sensor addresses solutions where fouling, corrosion or difficult process conditions challenge conventional cells, and can also support concentration or salinity monitoring. Convertible and sanitary forms are available in different polymers, allowing selection for chemical, food, refining, paper, metal-finishing and wastewater processes.
Features & Benefits
- Principle
- Toroidal electrodeless conductivity
- Published range
- 0.2–2000 mS/cm
- Reduces electrode fouling and compatibility issues
Applications
- Chemical concentration
- Salinity
- Wastewater
- Food and dairy
Detailed capabilities
What Is It?
5000TC is an electrodeless toroidal conductivity sensor for fouling/corrosive duties, covering the stated 0.2–2000 mS/cm range and related concentration/salinity work. Convertible or sanitary forms use selectable PEEK, PFA, PVDF or polypropylene construction. Chemical, food/dairy, refining, paper, finishing and wastewater uses require the appropriate material and mounting choice.
How Does It Work?
An AC-driven primary coil induces current in the process liquid, which induces a proportional signal in the pickup coil. The coils do not directly contact the solution, reducing electrode-maintenance problems. A 1.5-inch bore limits flow obstruction, and a 1000-ohm platinum RTD provides temperature compensation. These are inductive cells, not exposed-electrode resistance probes.
What Problems Does It Solve?
The inductive arrangement addresses coating, fouling and chemical attack that complicate contacting conductivity measurements. It supports dependable concentration or salinity monitoring while reducing service associated with exposed electrodes. Material compatibility and process limits remain configuration-specific; 'electrodeless' does not imply that the sensor body never contacts the process.
Environmental Conditions
- Temperature Compensation
- Pt1000Ω Platinum RTD
- Measurement Range
- 0.2 to 2000 milliSiemens/cm
- Pressure Limits
- PEEK: 200 psi at 302 deg F (13.8 bar at 150 deg C); PFA Teflon®: 200 psi at 302 deg F (13.8 bar at 150 deg C); PVDF: 100 psi at 248 deg F (6.9 bar at 120 deg C); Polypropylene: 100 psi at 212 deg F (6.9 bar at 100 deg C)
Processing & Performance Metrics
- Maximum Flow Rate
- 10 ft/s (3 m/s) gallons per minute
Mechanical & Physical Properties
- Wetted Materials
- PEEK; PFA Teflon®; PVDF; Polypropylene
I/O Capabilities
- Mounting Types
- Immersion; Insertion/Removal; Sanitary; Union-Mount
Functional & Control Features
- Sensor Styles
- Convertible (Immersion, Union, Insertion); Sanitary (CIP, 3A-Approved Materials)
Network & Connectivity Infrastructure
- Sensor Cable
- (5) Conductor + (2) Isolated Shields; (5) Conductor + (2) Isolated Shields, XLPE Jacket, Rated to 150 deg C (302 deg F), 20 ft (6 m) Length; 20 ft (6 m) Length; Rated to 150 deg C (302 deg F); XLPE Jacket
Applications & Compatibility
- Applications
- Chemical Concentration; Conductivity; Salinity Measurement in Tough Industrial Environments
Industries / Applications & Compatibility
- Industries
- Chemical, Food and Dairy, Refinery, Pulp and Paper, Metal Finishing, Wastewater
Others
- Operating Temperature Range
- 10 to 125 deg C; 14 to 257 deg F
| Parameter | Published value / configuration |
|---|---|
| Temperature Compensation | Pt1000Ω Platinum RTD |
| Measurement Range | 0.2 to 2000 milliSiemens/cm |
| Pressure Limits | PEEK: 200 psi at 302 deg F (13.8 bar at 150 deg C); PFA Teflon®: 200 psi at 302 deg F (13.8 bar at 150 deg C); PVDF: 100 psi at 248 deg F (6.9 bar at 120 deg C); Polypropylene: 100 psi at 212 deg F (6.9 bar at 100 deg C) |
| Maximum Flow Rate | 10 ft/s (3 m/s) gallons per minute |
| Wetted Materials | PEEK; PFA Teflon®; PVDF; Polypropylene |
| Mounting Types | Immersion; Insertion/Removal; Sanitary; Union-Mount |
| Sensor Styles | Convertible (Immersion, Union, Insertion); Sanitary (CIP, 3A-Approved Materials) |
| Sensor Cable | (5) Conductor + (2) Isolated Shields; (5) Conductor + (2) Isolated Shields, XLPE Jacket, Rated to 150 deg C (302 deg F), 20 ft (6 m) Length; 20 ft (6 m) Length; Rated to 150 deg C (302 deg F); XLPE Jacket |
| Applications | Chemical Concentration; Conductivity; Salinity Measurement in Tough Industrial Environments |
| Industries | Chemical, Food and Dairy, Refinery, Pulp and Paper, Metal Finishing, Wastewater |
| Operating Temperature Range | 10 to 125 deg C; 14 to 257 deg F |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published part numbers
9 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 31063324-501 | DO PROBE MOUNTING KIT | Request quotation |
| 5000TC | TOROIDAL ELECTRODELESS CONDUCT PROBE | Request quotation |
| 51452187-501 | FLOW-THRU MOUNTING KIT SS DO P | Request quotation |
| 51452187-502 | FLOW THROUGH CHEMBERS | Request quotation |
| 51452215-501 | COAX CABLE 26 GAGE 5CON 25FT | Request quotation |
| 51452215-502 | EXT CABLE 26 GAGE 5CON 50FT | Request quotation |
| 51452215-503 | EXT CABLE 26 GAGE 5CON 75FT | Request quotation |
| 51452215-504 | EXT CABLE 26 GAGE 5CON 100FT | Request quotation |
| 51452226-502 | IN-LINE MOUNTING KIT PVC DO PR | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
5000TC Toroidal Conductivity Sensor Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
