Conductivity
4973 Flow Thru Mounting
4973 conductivity cells combine a PES body with electrode choices selected by cell constant.
4973 conductivity cells combine a PES body with electrode choices selected by cell constant. In-line and flow-through mountings support continuous industrial-water measurements, while the related 4974 style provides sanitary tri-clamp installation. Honeywell publishes titanium or graphite electrodes across the range, allowing selection for different conductivity levels and process-connection needs.
Features & Benefits
- Electrodes
- Titanium or high-density graphite
- Mounting
- In-line or flow-through
- Provides cell-constant choices for different conductivity duties
Applications
- Industrial water conductivity measurement
Detailed capabilities
What Is It?
4973 uses PES construction with titanium electrodes for 0.01/0.1 constants and high-density graphite for 1.0/10.0. Flow-through and inline arrangements serve industrial water, while the related 4974 style adds sanitary tri-clamp installation. The electrode-material mapping is specific to these constants and differs from the DL4000 family described elsewhere.
How Does It Work?
The cell measures solution resistance while the immersed temperature compensator follows process changes. Inline installation uses a separately supplied three-quarter-inch tee or bypass; flow-through use needs a separate chamber. Published operation extends to 140°C/250 psig. For CIP duty, 4974 offers the stated 1.5- or 2-inch fittings, rather than making every 4973 mounting sanitary.
What Problems Does It Solve?
Maintaining electrode and temperature-sensor contact with the flowing solution improves response to concentration and temperature changes. Several constants and mounts accommodate high-purity and other water duties with straightforward service. The common measurement principle does not eliminate the need for correct chamber, wetted material and sanitary-connection selection.
Communication & Protocols
- Cell Constants Supported
- 0.01, 0.1, 1, and 10 cm⁻¹
Technical Specifications
- Electrical Connections
- (4) Leads with integral Automatic Temperature Compensator; Quick disconnect option (Turck)
Mechanical & Physical Properties
- Electrode Materials
- Titanium (0.01 and 0.1), High-Density Graphite (1 and 10)
Environmental Conditions
- Temperature Rating
- Up to 140 deg C (284 deg F)
- Pressure Ratings
- Up to 250 psig (1724 kPa)
Material Specifications
- Cell Body Material
- Polyethersulfone (PES) for high corrosion resistance
I/O Capabilities
- Insertion Depth
- 64 mm (2.5 in) for 0.1 Constant; 89 mm (3.5 in) for 1, 10, and 0.01 Constants
- Mounting Types
- Flow-Through (Direct in process stream or bypass sample line with 3/4 in pipe tee)
Network & Connectivity Infrastructure
- Cable/Leadwire
- Integral PVC-covered, non-shielded, 18-gage cable; Quick disconnect option available
Applications & Compatibility
- Applications
- Reliable, continuous measurement of electrolytic conductivity in industrial water processes
Standards & Certifications
- Approvals
- ASME Section VIII, Div. 1, UG-101, CRN #0F11607-5C
| Parameter | Published value / configuration |
|---|---|
| Cell Constants Supported | 0.01, 0.1, 1, and 10 cm⁻¹ |
| Electrical Connections | (4) Leads with integral Automatic Temperature Compensator; Quick disconnect option (Turck) |
| Electrode Materials | Titanium (0.01 and 0.1), High-Density Graphite (1 and 10) |
| Temperature Rating | Up to 140 deg C (284 deg F) |
| Pressure Ratings | Up to 250 psig (1724 kPa) |
| Cell Body Material | Polyethersulfone (PES) for high corrosion resistance |
| Insertion Depth | 64 mm (2.5 in) for 0.1 Constant; 89 mm (3.5 in) for 1, 10, and 0.01 Constants |
| Mounting Types | Flow-Through (Direct in process stream or bypass sample line with 3/4 in pipe tee) |
| Cable/Leadwire | Integral PVC-covered, non-shielded, 18-gage cable; Quick disconnect option available |
| Applications | Reliable, continuous measurement of electrolytic conductivity in industrial water processes |
| Approvals | ASME Section VIII, Div. 1, UG-101, CRN #0F11607-5C |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published part numbers
1 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 50038631-518 | REPL 50CNST CELL SS SUPPORT TB | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
4973 Flow Thru Mounting Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
