Safety Shut-Off Valves
HON Elster S100/S200
HON Elster S100 protects against overpressure, while S200 adds underpressure protection.
HON Elster S100 protects against overpressure, while S200 adds underpressure protection. Both are normally installed upstream of a regulator and permit any mounting orientation. Their manual reset incorporates pressure equalization, avoiding a separate bypass arrangement, while visual or optional switch-based position indication depends on the chosen model and configuration.
Models: HON Elster S100/S200
Features & Benefits
- S100
- Overpressure protection
- S200
- Underpressure and overpressure protection
- Reset
- Manual with integral equalization
- Integral equalization simplifies resetting arrangements
Applications
- Gas installation pressure protection
Detailed capabilities
HON Elster S100/S200 — operating design
HON Elster S100 protects against overpressure, while S200 adds underpressure protection. Both are normally installed upstream of a regulator and permit any mounting orientation. Their manual reset incorporates pressure equalization, avoiding a separate bypass arrangement, while visual or optional switch-based position indication depends on the chosen model and configuration.
S100 overpressure protection
S100 is normally installed upstream of the regulator and trips on excessive downstream pressure. It provides a local position indicator with an optional microswitch and a reset mechanism incorporating pressure equalization. Any orientation is permitted, and reset-side choices accommodate the installation while avoiding a separate bypass for the described reset procedure.
S200 high- and low-pressure protection
S200 adds underpressure response to overpressure shut-off and offers visual or switch-based indication. It likewise uses integral equalization and permits any orientation. The source lists standards and approval references for the selected valve, so these are retained as published identifiers rather than assigning the two models the same pressure-trip function.
Published configuration and technical facts
The manufacturer lists these values for HON Elster S100/S200. Version, size and option qualifications remain attached to each fact.
- Trip Pressure Range: 18 mbar to 6 bar
- Temperature Range: -20 to 60 deg C
- Pipe Size: DN 50, DN 80, DN 100
- Maximum Inlet Pressure Rating: Up to 19 bar
Applications & Compatibility
- Applications
- Suitable for natural, non-aggressive and manufactured gases - nitrogen, carbon dioxide, propane and other gases upon enquiry
Environmental Conditions
- Trip Pressure Range
- 18 mbar to 6 bar
- Temperature Range
- -20 to 60 deg C
Technical Specifications
- Pipe Size
- DN 50, DN 80, DN 100
- Maximum Inlet Pressure Rating
- Up to 19 bar
Standards & Certifications
- Approvals
- CE Mark with PED
| Parameter | Published value / configuration |
|---|---|
| Applications | Suitable for natural, non-aggressive and manufactured gases - nitrogen, carbon dioxide, propane and other gases upon enquiry |
| Trip Pressure Range | 18 mbar to 6 bar |
| Temperature Range | -20 to 60 deg C |
| Pipe Size | DN 50, DN 80, DN 100 |
| Maximum Inlet Pressure Rating | Up to 19 bar |
| Approvals | CE Mark with PED |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 003510243E | BOLT 5/16"-18UNC-2AX2,75" FOR AFV 2" | Request quotation |
| 073019863E | MEMBRANE AFV 3" DN 80, TYPE HB7 ANSI 150 | Request quotation |
| 073019866E | MEMBRANE AFV 4" DN100, TYPE HB7: ANSI | Request quotation |
| 73019113 | Lever SSV MR HP20, DN50 | Request quotation |
| 83575130 | SSV S300 | Request quotation |
| 888-888-544-944 | SPARE KIT SSV 4" LP SK112-01 | Request quotation |
| F064470116 | SPRING, SSV 180-280 MBAR DIVAL 600, Ø34, | Request quotation |
| I513101 | DIAPHRAGM PLATE MP | Request quotation |
| I513102 | RING RETAINER (SPR OVER 7) | Request quotation |
| ISAFE IS930 1 TAB | Industrial GradeTab+Hand Strap for Zone1 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON Elster S100/S200 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
