Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Safety Shut-Off Valves

HON 711 - DN 200 thru 300

HON 711 in DN200 through DN300 uses an axial passage to limit pressure loss in large gas lines.

HON 711 in DN200 through DN300 uses an axial passage to limit pressure loss in large gas lines. The shut-off valve offers several release arrangements and is supplied with manual release as standard. Compatible actuator selection determines the pressure trip range, while optional electromagnetic release and closed-position sensing support remote systems.

Models: HON 711 - DN 200 thru 300

Features & Benefits

Sizes
DN200, DN250 and DN300
Maximum admissible pressure
100 bar
Response time
0.1–0.5 s
  • Axial passage reduces pressure loss

Applications

  • Gas transmission stations, power plants and industrial facilities

Detailed capabilities

HON 711 - DN 200 thru 300 — operating design

HON 711 in DN200 through DN300 uses an axial passage to limit pressure loss in large gas lines. The shut-off valve offers several release arrangements and is supplied with manual release as standard. Compatible actuator selection determines the pressure trip range, while optional electromagnetic release and closed-position sensing support remote systems.

Manufacturer reference ↗

Large axial body and release options

This HON 711 group covers DN200, DN250 and DN300. Axial flow limits pressure loss, while the listed actuator systems establish overpressure or underpressure response. Manual release is standard among four release arrangements, with electromagnetic release and closed-position sensing optional. The source gives 0.1–0.5 second closing response and identifies SIL certification for the applicable device.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 711 - DN 200 thru 300. Version, size and option qualifications remain attached to each fact.

  • Maximum Operating Pressure: Up to 100 bar (130 bar on request for ANSI 900 RTJ) kilopascal
  • Outlet Pressure Range: For over-pressure Wdso 80 mbar to 90 bar; For under-pressure Wdsu 10 mbar to 90 bar
  • Temperature Range: -20 to +60 deg C (Class 2)
  • Explosion Protection: Not subject to ATEX 95 (no ignition sources), electronic accessories must satisfy ATEX
  • Approvals: CE (PED), DVGW, GOST, GOSTTECHNADSOR, SIL IEC61508
  • Control Devices: K10a, K11a/1, K11a/2, K16, K17, K18, K19
  • Connection Type: ANSI 300, 600 RF, RTJ, 900 RTJ (PS = 130 bar on request); DIN Flange PN 25, PN 40
  • Nominal Widths: DN 25 to 300
  • Response Time: 0.1 to 0.3 sec millisecond
  • Materials: A 352 LCC/G20Mn5 QT Medium/Low Alloyed Steel

Manufacturer reference ↗

Specifications

Environmental Conditions

Maximum Operating Pressure
Up to 100 bar (130 bar on request for ANSI 900 RTJ) kilopascal
Outlet Pressure Range
For over-pressure Wdso 80 mbar to 90 bar; For under-pressure Wdsu 10 mbar to 90 bar
Temperature Range
-20 to +60 deg C (Class 2)

Mechanical & Physical Properties

Supplemental Fixture
Manual Release, Current Supply, Current Failure, Remote Indication, Outdoor Type, Special Design

Standards & Certifications

Explosion Protection
Not subject to ATEX 95 (no ignition sources), electronic accessories must satisfy ATEX
Approvals
CE (PED), DVGW, GOST, GOSTTECHNADSOR, SIL IEC61508

Communication & Protocols

Control Devices
K10a, K11a/1, K11a/2, K16, K17, K18, K19

Technical Specifications

Connection Type
ANSI 300, 600 RF, RTJ, 900 RTJ (PS = 130 bar on request); DIN Flange PN 25, PN 40

Electrical Specifications

Nominal Widths
DN 25 to 300

I/O Capabilities

Response Time
0.1 to 0.3 sec millisecond

Applications & Compatibility

Applications
Safety shut-off valve for gas pressure regulating stations, Natural gas (DVGW G 260) and other gases on request

Material Specifications

Materials
A 352 LCC/G20Mn5 QT Medium/Low Alloyed Steel
HON 711 - DN 200 thru 300 — manufacturer page values
ParameterPublished value / configuration
Maximum Operating PressureUp to 100 bar (130 bar on request for ANSI 900 RTJ) kilopascal
Outlet Pressure RangeFor over-pressure Wdso 80 mbar to 90 bar; For under-pressure Wdsu 10 mbar to 90 bar
Temperature Range-20 to +60 deg C (Class 2)
Supplemental FixtureManual Release, Current Supply, Current Failure, Remote Indication, Outdoor Type, Special Design
Explosion ProtectionNot subject to ATEX 95 (no ignition sources), electronic accessories must satisfy ATEX
ApprovalsCE (PED), DVGW, GOST, GOSTTECHNADSOR, SIL IEC61508
Control DevicesK10a, K11a/1, K11a/2, K16, K17, K18, K19
Connection TypeANSI 300, 600 RF, RTJ, 900 RTJ (PS = 130 bar on request); DIN Flange PN 25, PN 40
Nominal WidthsDN 25 to 300
Response Time0.1 to 0.3 sec millisecond
ApplicationsSafety shut-off valve for gas pressure regulating stations, Natural gas (DVGW G 260) and other gases on request
MaterialsA 352 LCC/G20Mn5 QT Medium/Low Alloyed Steel

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

HON 711 - DN 200 thru 300Request quotation ›

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON711Safety Shut-Off Valve HON 711Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/safety-shut-off-valves/hon-711-dn-200-thru-300

Last source check: 2026-11-02

HON 711 – DN 200 thru 300 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry