Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Safety Shut-Off Valves

HON 305

HON 305 isolates gas supply when downstream pressure exceeds the selected limit.

HON 305 isolates gas supply when downstream pressure exceeds the selected limit. Its inline single-orifice arrangement uses an external sensing connection, manual reset and a pressure-balancing bypass. A local position indicator is standard and remote indication is available; an optional combined release arrangement also responds to underpressure in suitable configurations.

Models: HON 305

Features & Benefits

Maximum inlet pressure
Up to 19 bar, dependent on body and size
Reset
Manual
Indication
Local standard, remote option
  • Self-acting operation requires no separate power source

Applications

  • Gas supply and network protection

Detailed capabilities

HON 305 — operating design

HON 305 isolates gas supply when downstream pressure exceeds the selected limit. Its inline single-orifice arrangement uses an external sensing connection, manual reset and a pressure-balancing bypass. A local position indicator is standard and remote indication is available; an optional combined release arrangement also responds to underpressure in suitable configurations.

Manufacturer reference ↗

Position indication and reset

The normally self-acting HON 305 senses outlet pressure through an external line and isolates the station on excessive pressure. Local indication is standard and remote indication optional. A balancing bypass and manual reset support controlled re-engagement, while combined underpressure protection is an option. The stated maximum inlet depends on body material and size.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 305. Version, size and option qualifications remain attached to each fact.

  • Maximum Inlet Pressure Rating: Up to 19 bar
  • Pipe Size: DN 50, DN 80, DN 100, DN 150, DN 200
  • Temperature Range: -20 to 60 deg C

Manufacturer reference ↗

Specifications

Technical Specifications

Maximum Inlet Pressure Rating
Up to 19 bar
Pipe Size
DN 50, DN 80, DN 100, DN 150, DN 200

Standards & Certifications

Explosion Protection
All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
Approvals
CE Mark with PED

Environmental Conditions

Temperature Range
-20 to 60 deg C

Applications & Compatibility

Applications
Suitable for natural, non-aggressive and manufactured gases - nitrogen, carbon dioxide, propane and other gases upon enquiry
HON 305 — manufacturer page values
ParameterPublished value / configuration
Maximum Inlet Pressure RatingUp to 19 bar
Pipe SizeDN 50, DN 80, DN 100, DN 150, DN 200
Explosion ProtectionAll mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
ApprovalsCE Mark with PED
Temperature Range-20 to 60 deg C
ApplicationsSuitable for natural, non-aggressive and manufactured gases - nitrogen, carbon dioxide, propane and other gases upon enquiry

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

3 parts

Part NumberDescriptionEnquiry
HON305IPSERIES 305IP SAFETY CUT OFF VALVERequest quotation
HON305LPSERIES 305LP SAFETY CUT OFF VALVERequest quotation
HON305MPSERIES 305MP SAFETY CUT OFF VALVERequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/safety-shut-off-valves/hon-305

Last source check: 2026-11-02

HON 305 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry