Safety Shut-Off Valves
HON 703
HON 703 places two independent safety shut-off units in one shared body.
HON 703 places two independent safety shut-off units in one shared body. The twin arrangement serves industrial supplies and low-load lines in larger pressure-regulating stations. Replaceable cartridges simplify service, while actuator, venting and optional remote release or position indication choices allow the complete protection assembly to match the installation.
Models: HON 703
Features & Benefits
- Arrangement
- 2 independent shut-off units
- Maximum admissible pressure
- 100 bar
- Response time
- 0.1–0.3 s
- Compact twin protection and exchangeable functional units
Applications
- Industrial facilities and low-load regulating lines
Detailed capabilities
HON 703 — operating design
HON 703 places two independent safety shut-off units in one shared body. The twin arrangement serves industrial supplies and low-load lines in larger pressure-regulating stations. Replaceable cartridges simplify service, while actuator, venting and optional remote release or position indication choices allow the complete protection assembly to match the installation.
Independent twin shut-off operation
Two shut-off units share one body but operate independently. Replaceable cartridges simplify servicing, with several actuator systems establishing the pressure settings. The source gives a 0.1–0.3 second response range and options for manual or electromagnetic release and closed-position sensing. It also identifies combinations with HON 200 and HON 201 regulators for low-load and industrial supplies.
Published configuration and technical facts
The manufacturer lists these values for HON 703. Version, size and option qualifications remain attached to each fact.
- Maximum Operating Pressure: Up to 100 bar (depending on connection type) kilopascal
- Outlet Pressure Range: For over-pressure Wdso 50 mbar to 90 bar; For under-pressure Wdsu 10 mbar to 90 bar
- Temperature Range: -20 to +60 deg C (Class 2)
- Supplemental Fixture: Electrical Release, Electrical Position Indicator, Manual Release, Screw-In Port for Combination With HON 200/201
- Valve Seat Diameter: 25 mm
- Response Time: 0.1 to 0.3 sec millisecond
- Control Devices: K 1a, K 2a, K 16, K 17, K 18 (various setpoint springs and adjustment ranges for over/under pressure)
Environmental Conditions
- Maximum Operating Pressure
- Up to 100 bar (depending on connection type) kilopascal
- Outlet Pressure Range
- For over-pressure Wdso 50 mbar to 90 bar; For under-pressure Wdsu 10 mbar to 90 bar
- Temperature Range
- -20 to +60 deg C (Class 2)
Mechanical & Physical Properties
- Supplemental Fixture
- Electrical Release, Electrical Position Indicator, Manual Release, Screw-In Port for Combination With HON 200/201
- Valve Seat Diameter
- 25 mm
Standards & Certifications
- Explosion Protection
- All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
- Approvals
- CE Mark with PED
I/O Capabilities
- Valve Configuration
- Tandem SSV (two independent safety shut-off devices in one valve body)
- Response Time
- 0.1 to 0.3 sec millisecond
Communication & Protocols
- Control Devices
- K 1a, K 2a, K 16, K 17, K 18 (various setpoint springs and adjustment ranges for over/under pressure)
Technical Specifications
- Connection Type
- Flange (DIN PN 25/40, ANSI 300/600, DN 25/40/50); Inlet/Outlet: Screwed Pipe Connection (DIN 2353, PN 100, for pipe diameters 10 to 42 mm)
Applications & Compatibility
- Applications
- For natural gas and non-aggressive gases; Safety shut-off valve for municipal, industrial, and individual gas pressure regulating systems; Suitable for low-load rails in larger control systems
Material Specifications
- Materials
- Aluminum Alloy or Steel
| Parameter | Published value / configuration |
|---|---|
| Maximum Operating Pressure | Up to 100 bar (depending on connection type) kilopascal |
| Outlet Pressure Range | For over-pressure Wdso 50 mbar to 90 bar; For under-pressure Wdsu 10 mbar to 90 bar |
| Temperature Range | -20 to +60 deg C (Class 2) |
| Supplemental Fixture | Electrical Release, Electrical Position Indicator, Manual Release, Screw-In Port for Combination With HON 200/201 |
| Valve Seat Diameter | 25 mm |
| Explosion Protection | All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements. |
| Approvals | CE Mark with PED |
| Valve Configuration | Tandem SSV (two independent safety shut-off devices in one valve body) |
| Response Time | 0.1 to 0.3 sec millisecond |
| Control Devices | K 1a, K 2a, K 16, K 17, K 18 (various setpoint springs and adjustment ranges for over/under pressure) |
| Connection Type | Flange (DIN PN 25/40, ANSI 300/600, DN 25/40/50); Inlet/Outlet: Screwed Pipe Connection (DIN 2353, PN 100, for pipe diameters 10 to 42 mm) |
| Applications | For natural gas and non-aggressive gases; Safety shut-off valve for municipal, industrial, and individual gas pressure regulating systems; Suitable for low-load rails in larger control systems |
| Materials | Aluminum Alloy or Steel |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
1 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HON703 | Savety Shut-Off Valve HON 703 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 703 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
