Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Safety Shut-Off Valves

HON 704

HON 704 is a compact safety shut-off valve offered with direct or pilot-operated arrangements.

HON 704 is a compact safety shut-off valve offered with direct or pilot-operated arrangements. It serves industrial consumers and low-load station lines, using replaceable functional cartridges for maintenance. Several actuator systems and optional electrical release or closed-position indication support selection of the complete assembly for the required pressure protection duty.

Models: HON 704

Features & Benefits

Maximum admissible pressure
100 bar
Response time
0.1–0.3 s
Construction
Exchangeable cartridges
  • Compact layout and serviceable functional units

Applications

  • Industrial gas supplies and low-load station lines

Detailed capabilities

HON 704 — operating design

HON 704 is a compact safety shut-off valve offered with direct or pilot-operated arrangements. It serves industrial consumers and low-load station lines, using replaceable functional cartridges for maintenance. Several actuator systems and optional electrical release or closed-position indication support selection of the complete assembly for the required pressure protection duty.

Manufacturer reference ↗

Cartridge assembly and optional signaling

HON 704 offers a compact single shut-off unit for industrial consumers or low-load station branches. The exchangeable functional assembly can use the listed actuator systems, with optional venting. Remote closed indication, electromagnetic release and manual release are selectable additions. Its response and pressure ranges belong to the complete actuator/valve configuration, not every possible safety device.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 704. Version, size and option qualifications remain attached to each fact.

  • Maximum Operating Pressure: Up to 100 bar (depending on connection type) kilopascal
  • Outlet Pressure Range: For over-pressure Wdso 50 mbar to 90 bar; For under-pressure Wdsu 10 mbar to 90 bar
  • Temperature Range: -20 to +60 deg C (Class 2)
  • Supplemental Fixture: Electrical Release, Electrical Position Indicator, Manual Release, Screw-In Port for Combination With HON 200/201
  • Valve Seat Diameter: 25 mm
  • Response Time: 0.1 to 0.3 sec millisecond
  • Control Devices: K 1a, K 2a, K 16, K 17, K 18 (various setpoint springs and adjustment ranges for over/under pressure)

Manufacturer reference ↗

Specifications

Environmental Conditions

Maximum Operating Pressure
Up to 100 bar (depending on connection type) kilopascal
Outlet Pressure Range
For over-pressure Wdso 50 mbar to 90 bar; For under-pressure Wdsu 10 mbar to 90 bar
Temperature Range
-20 to +60 deg C (Class 2)

Mechanical & Physical Properties

Supplemental Fixture
Electrical Release, Electrical Position Indicator, Manual Release, Screw-In Port for Combination With HON 200/201
Valve Seat Diameter
25 mm

Standards & Certifications

Explosion Protection
All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
Approvals
CE Mark with PED

I/O Capabilities

Valve Configuration
Single SSV
Response Time
0.1 to 0.3 sec millisecond

Communication & Protocols

Control Devices
K 1a, K 2a, K 16, K 17, K 18 (various setpoint springs and adjustment ranges for over/under pressure)

Technical Specifications

Connection Type
Flange (DIN PN 25/40, ANSI 300/600, DN 25/40/50); Inlet/Outlet: Screwed Pipe Connection (DIN 2353, PN 100, for pipe diameters 10 to 42 mm)

Applications & Compatibility

Applications
Safety shut-off valve for municipal, industrial, and individual gas pressure regulating systems; Suitable for low-load rails in larger control systems; for natural gas and non-aggressive gases

Material Specifications

Materials
Aluminum Alloy or Steel
HON 704 — manufacturer page values
ParameterPublished value / configuration
Maximum Operating PressureUp to 100 bar (depending on connection type) kilopascal
Outlet Pressure RangeFor over-pressure Wdso 50 mbar to 90 bar; For under-pressure Wdsu 10 mbar to 90 bar
Temperature Range-20 to +60 deg C (Class 2)
Supplemental FixtureElectrical Release, Electrical Position Indicator, Manual Release, Screw-In Port for Combination With HON 200/201
Valve Seat Diameter25 mm
Explosion ProtectionAll mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
ApprovalsCE Mark with PED
Valve ConfigurationSingle SSV
Response Time0.1 to 0.3 sec millisecond
Control DevicesK 1a, K 2a, K 16, K 17, K 18 (various setpoint springs and adjustment ranges for over/under pressure)
Connection TypeFlange (DIN PN 25/40, ANSI 300/600, DN 25/40/50); Inlet/Outlet: Screwed Pipe Connection (DIN 2353, PN 100, for pipe diameters 10 to 42 mm)
ApplicationsSafety shut-off valve for municipal, industrial, and individual gas pressure regulating systems; Suitable for low-load rails in larger control systems; for natural gas and non-aggressive gases
MaterialsAluminum Alloy or Steel

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON704Savety Shut-Off Valve HON 704Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/safety-shut-off-valves/hon-704

Last source check: 2026-11-02

HON 704 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry