Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Safety Shut-Off Valves

HON 303 MK5

HON 303 MK5 is a self-acting safety shut-off valve installed upstream of a regulator with an external downstream sensing line.

HON 303 MK5 is a self-acting safety shut-off valve installed upstream of a regulator with an external downstream sensing line. It closes the station on overpressure without an external supply. A pressure-compensation button supports manual resetting, while the LP and MP versions provide different release-setting ranges for the selected installation.

Models: HON 303 MK5

Features & Benefits

Maximum inlet pressure
7 bar
Sizes
DN250 and DN300
Reset
Manual
  • Low pressure loss and self-powered operation

Applications

  • Gas supply and network overpressure protection

Detailed capabilities

HON 303 MK5 — operating design

HON 303 MK5 is a self-acting safety shut-off valve installed upstream of a regulator with an external downstream sensing line. It closes the station on overpressure without an external supply. A pressure-compensation button supports manual resetting, while the LP and MP versions provide different release-setting ranges for the selected installation.

Manufacturer reference ↗

Sensing and manual re-engagement

HON 303 MK5 is installed on the inlet side with an external line sensing the downstream pressure. Overpressure closes the supply automatically without auxiliary power. A pressure-equalization button assists hand reset. LP and MP series settings are separate, and the source lists DN250 and DN300 for this large-valve offering rather than the sizes of other HON shut-offs.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 303 MK5. Version, size and option qualifications remain attached to each fact.

  • Maximum Inlet Pressure Rating: Up to 7 bar
  • Pipe Size: DN 250, DN 300
  • Temperature Range: -20 to 60 deg C
  • Setting Range: Series 303LP: 0.037 to 0.48 bar; Series 303MP: 0.42 to 4.5 bar

Manufacturer reference ↗

Specifications

Technical Specifications

Maximum Inlet Pressure Rating
Up to 7 bar
Pipe Size
DN 250, DN 300

Standards & Certifications

Explosion Protection
All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
Approvals
CE Mark with PED

Environmental Conditions

Temperature Range
-20 to 60 deg C
Setting Range
Series 303LP: 0.037 to 0.48 bar; Series 303MP: 0.42 to 4.5 bar

Applications & Compatibility

Applications
Suitable for natural, non-aggressive and manufactured gases - nitrogen, carbon dioxide, propane and other gases upon enquiry
HON 303 MK5 — manufacturer page values
ParameterPublished value / configuration
Maximum Inlet Pressure RatingUp to 7 bar
Pipe SizeDN 250, DN 300
Explosion ProtectionAll mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
ApprovalsCE Mark with PED
Temperature Range-20 to 60 deg C
Setting RangeSeries 303LP: 0.037 to 0.48 bar; Series 303MP: 0.42 to 4.5 bar
ApplicationsSuitable for natural, non-aggressive and manufactured gases - nitrogen, carbon dioxide, propane and other gases upon enquiry

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

2 parts

Part NumberDescriptionEnquiry
HON303LPSERIES 303LP SAFETY CUT OFF VALVERequest quotation
HON303MPSERIES 303MP SAFETY CUT OFF VALVERequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/safety-shut-off-valves/hon-303-mk5

Last source check: 2026-11-02

HON 303 MK5 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry