Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Safety Shut-Off Valves

HON 790

HON 790 is a safety shut-off device for flow and return pipes of heating circuits.

HON 790 is a safety shut-off device for flow and return pipes of heating circuits. Its sandwich body mounts between compatible flanges and is designed for low pressure loss. The manufacturer identifies simple operating and performance checks, with permissible pressure dependent on the selected connection and installation rather than one universal flange arrangement.

Models: HON 790

Features & Benefits

Maximum admissible pressure
Up to 160 bar
Sizes
DN25, DN50, DN80, DN100 and DN150
Construction
Sandwich body
  • Simple construction supports operating and performance checks

Applications

  • Heating circuit flow and return lines

Specifications

Processing & Performance Metrics

Maximum Permissible Pressure
DN 25 to 150: 160 bar, DN 200: 250 bar
Accuracy Group
AG 5, AG 2.5

Environmental Conditions

Permissible Temperature
Up to 140 deg C

I/O Capabilities

Installation Lengths
DN 25 to 100: 140 to 160 mm, DN 150: 240 mm, DN 200: 280 mm

Standards & Certifications

Explosion Protection
No ignition sources, not subject to ATEX 95. Electronic accessories comply with ATEX
Approvals
PED CE Mark 0085, SIL IEC61508

Technical Specifications

Connection Type
ANSI B16.5 (EN 1759-1): Class 300/600/900 RTJ*/1500 RTJ*; DIN EN 1092-1: PN 10 to PN 40 (Except DN 200); DN 200: Only Class 600 RF or Higher

Electrical Specifications

Nominal Widths
DN 25, DN 50, DN 80, DN 100, DN 150, DN 200

Material Specifications

Body Material
Brass

Applications & Compatibility

Applications
Safety shut-off valve for installations in hot water circuit of gas pre-heater systems for safeguarding boiler systems
HON 790 — manufacturer page values
ParameterPublished value / configuration
Maximum Permissible PressureDN 25 to 150: 160 bar, DN 200: 250 bar
Accuracy GroupAG 5, AG 2.5
Permissible TemperatureUp to 140 deg C
Installation LengthsDN 25 to 100: 140 to 160 mm, DN 150: 240 mm, DN 200: 280 mm
Explosion ProtectionNo ignition sources, not subject to ATEX 95. Electronic accessories comply with ATEX
ApprovalsPED CE Mark 0085, SIL IEC61508
Connection TypeANSI B16.5 (EN 1759-1): Class 300/600/900 RTJ*/1500 RTJ*; DIN EN 1092-1: PN 10 to PN 40 (Except DN 200); DN 200: Only Class 600 RF or Higher
Nominal WidthsDN 25, DN 50, DN 80, DN 100, DN 150, DN 200
Body MaterialBrass
ApplicationsSafety shut-off valve for installations in hot water circuit of gas pre-heater systems for safeguarding boiler systems

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType
HON 790 ↗2026-11-02PDF

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON790Savety Shut-Off Valve HON 790Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/safety-shut-off-valves/hon-790

Last source check: 2026-11-02

HON 790 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry