Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Safety Shut-Off Valves

HON 752

HON 752 combines safety isolation and pressure regulation in one hybrid gas valve.

HON 752 combines safety isolation and pressure regulation in one hybrid gas valve. An axial arrangement provides high capacity in a compact unit, addressing constrained gas valve installations. The manufacturer identifies marine LNG engine and industrial regulating duties, with opening and closing below one second and an integrated design that reduces separate valves and piping.

Models: HON 752

Features & Benefits

Functions
Safety shut-off and pressure regulation
Opening/closing
Under 1 second
  • Compact combined functions simplify gas valve units

Applications

  • LNG marine engines and space-constrained industrial gas regulation

Detailed capabilities

HON 752 — operating design

HON 752 combines safety isolation and pressure regulation in one hybrid gas valve. An axial arrangement provides high capacity in a compact unit, addressing constrained gas valve installations. The manufacturer identifies marine LNG engine and industrial regulating duties, with opening and closing below one second and an integrated design that reduces separate valves and piping.

Manufacturer reference ↗

Hybrid architecture and actuation

HON752 combines regulation with safety shut-off in DN25 and DN50. It operates up to forty bar using process gas or external compressed air, with an I/P transducer controlling regulation. Stainless internals and a low-loss axial path reduce component count and wear, while open/closed switches provide position feedback. Opening and closing are stated as under one second.

Manufacturer reference ↗

Intended valve-unit applications

The manufacturer identifies LNG marine engine gas valve units, engine OEMs and compact industrial regulating units. It claims a footprint reduction of up to twenty percent for the described valve-unit approach, linked to the combined functions rather than every possible installation. Fewer components simplify assembly and maintenance while the axial design supports stable high-capacity operation.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 752. Version, size and option qualifications remain attached to each fact.

  • Sizes: 1 in (DN 25) and 2 in (DN 50)
  • Maximum Operating Pressure: 4000 (depending on flange version) kilopascal
  • Outlet Pressure Range: 0.5 to 7.5 bar
  • Temperature Range: According to PED Class 2 –20°C to 60°C / Marine version 0°C to 50°C
  • Degree Of Protection: IP65
  • Connection Type: Flanges according to DIN EN 1092 PN 16, PN25, PN 40
  • Closing Time: < 1 sec

Manufacturer reference ↗

Specifications

Mechanical & Physical Properties

Sizes
1 in (DN 25) and 2 in (DN 50)

Environmental Conditions

Maximum Operating Pressure
4000 (depending on flange version) kilopascal
Outlet Pressure Range
0.5 to 7.5 bar
Temperature Range
According to PED Class 2 –20°C to 60°C / Marine version 0°C to 50°C

Standards & Certifications

Explosion Protection
Zone I
Degree Of Protection
IP65
Approvals
Certified according to CE PED DVGW

Technical Specifications

Connection Type
Flanges according to DIN EN 1092 PN 16, PN25, PN 40

Material Specifications

Body Material
Inlet: Steel, Outlet: Steel or Stainless Steel

Electrical Specifications

Control Type
Safety shut-off: Solenoid control valve – compressed air 3 to 10 bar Pressure control: Pneumatic pilot with outlet pressure setpoint control via setpoint pressure signal (e.g. IP converter)

I/O Capabilities

Closing Time
< 1 sec

Applications & Compatibility

Applications
Hybrid Safety valve and control valve for gas engines and other natural gas applications; Ideal for maritime engines and long maintenance intervals
HON 752 — manufacturer page values
ParameterPublished value / configuration
Sizes1 in (DN 25) and 2 in (DN 50)
Maximum Operating Pressure4000 (depending on flange version) kilopascal
Outlet Pressure Range0.5 to 7.5 bar
Temperature RangeAccording to PED Class 2 –20°C to 60°C / Marine version 0°C to 50°C
Explosion ProtectionZone I
Degree Of ProtectionIP65
ApprovalsCertified according to CE PED DVGW
Connection TypeFlanges according to DIN EN 1092 PN 16, PN25, PN 40
Body MaterialInlet: Steel, Outlet: Steel or Stainless Steel
Control TypeSafety shut-off: Solenoid control valve – compressed air 3 to 10 bar Pressure control: Pneumatic pilot with outlet pressure setpoint control via setpoint pressure signal (e.g. IP converter)
Closing Time< 1 sec
ApplicationsHybrid Safety valve and control valve for gas engines and other natural gas applications; Ideal for maritime engines and long maintenance intervals

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON752SAFETY SHUT-OFF VALVE WITH REGULATIONRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/safety-shut-off-valves/hon-752

Last source check: 2026-11-02

HON752 Product Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry