Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Safety Shut-Off Valves

HON 720

HON 720 is a direct-acting safety shut-off valve for distribution and commercial or industrial installations.

HON 720 is a direct-acting safety shut-off valve for distribution and commercial or industrial installations. Its compact body uses exchangeable functional units, and actuator selection depends on line size. Optional electrical release and valve-closed sensing support integration, while the smaller DN25 version has a different permissible pressure from the larger sizes.

Models: HON 720

Features & Benefits

Maximum admissible pressure
25 bar, DN25 limited to 16 bar
Sizes
DN25, DN50, DN80 and DN100
Response time
0.1–0.3 s
  • Replaceable functional units simplify maintenance

Applications

  • Distribution stations and commercial or industrial facilities

Detailed capabilities

HON 720 — operating design

HON 720 is a direct-acting safety shut-off valve for distribution and commercial or industrial installations. Its compact body uses exchangeable functional units, and actuator selection depends on line size. Optional electrical release and valve-closed sensing support integration, while the smaller DN25 version has a different permissible pressure from the larger sizes.

Manufacturer reference ↗

Size-dependent actuator and pressure limits

HON 720 uses K1a/K2a systems at DN25 and K4/K5/K6 options from DN50. The smallest size is limited to sixteen bar, compared with twenty-five bar for the larger published arrangement. Optional electrical release and proximity indication extend the cartridge-based shut-off, while the separate pressure-trip ranges and response times govern the complete selected assembly.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 720. Version, size and option qualifications remain attached to each fact.

  • Maximum Service Pressure: DN 25: 16 bar, DN 50, DN 80, DN 100: 25 bar (depending on flange version)
  • Outlet Pressure Range: For over-pressure Wdso 40 mbar to 4.5 bar; For under-pressure Wdsu 5 mbar to 0.4 bar
  • Temperature Range: -20 to +60 deg C (Class 2)
  • Explosion Protection: No ignition sources, not subject to ATEX 95. Electronic accessories comply with ATEX
  • Approvals: DIN-DVGW-Reg.-No. NG-4303AU0020, CE Mark with PED
  • Control Devices: K 1a, K 2a (DN 25) or K 4, K 5, K 6 (≥ DN 50)
  • Connection Type: DN 25: DIN flanges PN 16, ANSI 150 RF; DN 50/80/100: DIN flanges PN 16, PN 25, ANSI 150 RF
  • Response Time: 0.1 to 0.3 sec millisecond
  • Body Material: DN 25/50: Cast Steel; DN 80/100: Cast Steel, Ductile Iron

Manufacturer reference ↗

Specifications

Processing & Performance Metrics

Maximum Service Pressure
DN 25: 16 bar, DN 50, DN 80, DN 100: 25 bar (depending on flange version)

Environmental Conditions

Outlet Pressure Range
For over-pressure Wdso 40 mbar to 4.5 bar; For under-pressure Wdsu 5 mbar to 0.4 bar
Temperature Range
-20 to +60 deg C (Class 2)

Standards & Certifications

Explosion Protection
No ignition sources, not subject to ATEX 95. Electronic accessories comply with ATEX
Approvals
DIN-DVGW-Reg.-No. NG-4303AU0020, CE Mark with PED

Communication & Protocols

Control Devices
K 1a, K 2a (DN 25) or K 4, K 5, K 6 (≥ DN 50)

Technical Specifications

Connection Type
DN 25: DIN flanges PN 16, ANSI 150 RF; DN 50/80/100: DIN flanges PN 16, PN 25, ANSI 150 RF

I/O Capabilities

Response Time
0.1 to 0.3 sec millisecond

Material Specifications

Body Material
DN 25/50: Cast Steel; DN 80/100: Cast Steel, Ductile Iron

Applications & Compatibility

Applications
Safety shut-off valve for gas pressure regulating stations, Natural gas (DVGW G 260) and other gases on request
HON 720 — manufacturer page values
ParameterPublished value / configuration
Maximum Service PressureDN 25: 16 bar, DN 50, DN 80, DN 100: 25 bar (depending on flange version)
Outlet Pressure RangeFor over-pressure Wdso 40 mbar to 4.5 bar; For under-pressure Wdsu 5 mbar to 0.4 bar
Temperature Range-20 to +60 deg C (Class 2)
Explosion ProtectionNo ignition sources, not subject to ATEX 95. Electronic accessories comply with ATEX
ApprovalsDIN-DVGW-Reg.-No. NG-4303AU0020, CE Mark with PED
Control DevicesK 1a, K 2a (DN 25) or K 4, K 5, K 6 (≥ DN 50)
Connection TypeDN 25: DIN flanges PN 16, ANSI 150 RF; DN 50/80/100: DIN flanges PN 16, PN 25, ANSI 150 RF
Response Time0.1 to 0.3 sec millisecond
Body MaterialDN 25/50: Cast Steel; DN 80/100: Cast Steel, Ductile Iron
ApplicationsSafety shut-off valve for gas pressure regulating stations, Natural gas (DVGW G 260) and other gases on request

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON720Savety Shut-Off Valve HON 720Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/safety-shut-off-valves/hon-720

Last source check: 2026-11-02

HON 720 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry