Shutoff Valves
Series 8000 Air Actuated Safety Shut-off Valves for Fuel Gas Service
Series 8000 gas valves use pneumatic actuation and spring closure with a prominent all-angle position indicator.
Series 8000 gas valves use pneumatic actuation and spring closure with a prominent all-angle position indicator. Replaceable, rotatable actuators and a bonnet seal without packing adjustment support maintenance. Body/trim options address different gases, and optional PSCheck partial-stroke testing checks function without shutting down the line under the stated system arrangement.
Features & Benefits
- Actuator Pressure Requirement
- 40-100 psig (varies by series)
- Hazardous Location Approvals
- Non-Incendive: FM, CSA, EN161, IECEx, UKCA (GAR), SIL 3 capable, Inmetro certified, KTL, CCC, API 6FA | Intrinsically Safe: FM, CSA, EN161, IECEx, UKCA (GAR), UKCA (ATEX), ATEX, SIL 3 capable, Inmetro, KTL, CCC, EAC EX, CCC, API 6FA
- Visual Position Indicator
- 360 deg top-mounted, configurable (red/green or yellow/black)
- Ambient Temperature Range
- -40 to 140 deg F (option for -58 to 140 deg F)|IS versions: up to 122 deg F
- Operating Pressure Range
- Up to 255 psig (varies by size and configuration)
- Fluid Temperature Range
- -40 to 212 deg F (option for -58 to 212 deg F)
- Valve Body Material
- Cast Iron, Carbon Steel, Low Temp Carbon Steel, Stainless Steel
- Electrical Rating
- 24 VDC, 120 VAC, 240 VAC|NEMA 4, 4X, IP65
- Enclosure Rating
- NEMA 4, NEMA 4X, IP65
- Connection Type
- NPT, ISO Threaded, ANSI/DIN/EN Flanged, Socket Welded with 150#/300# flanges
- Trim Materials
- Various trim options available depending on fuel gas including: 400 SS Seat/Hardened Ductile Iron Disc /PEEK follower for clean gases, 300SS Seat/300SS Disc/PEEK follower400 Series Stainless Steel for corrosive gases, and 300SS Seat/300SS Disc/300SS Follower for Firesafe applications
- Seal Material
- Buna-N, Viton, Ethylene Propylene, Omniflex
- Opening Time
- ~1 to 3 seconds (size-dependent)
- Closing Time
- <1 seconds
- Valve Sizes
- 3/4 (DN20) to 8 in (DN200)
- Switch Type
- SPDT (VOS1/VCS1, VOS2/VCS2), IP67 Standard for Non-Incendive Valves, Optional for Intrinsically Safe Valves
- Valve Type
- Pneumatically actuated shut-off and vent valves
- Cycle Life
- CSA: 100,000; FM: 20,000; EN161: up to 200,000 (≤3 in)
- Approvals
- General Purpose Valves: FM, CSA, UKCA, EN161, PED, EAC, SIL 3 capable, API 6FA
- A replaceable actuator supports service without replacing the entire valve.
- Optional partial-stroke testing checks movement without stopping process flow.
Applications
- Fuel-gas safety shutoff and venting
Detailed capabilities
Pneumatic closing system and maintainable actuator
The Series 8000 gas valve combines a quick exhaust path with a strong closing spring to achieve the published sub-second closure. Its compact body limits piping space, while a large top indicator can be seen around the valve. The actuator can be changed in the field and rotated in 90-degree increments, and the bonnet arrangement eliminates packing adjustment that could add closing friction.
Trims, special service and partial-stroke testing
Body and trim choices address general or corrosive gases, with options for oxygen, NACE service and the stated fire-safe qualification. Intrinsically safe or non-incendive constructions are separately identified. PSCheck can test a partial stroke without shutting down line flow, reducing undetected failure exposure in the stated safety arrangement. SIL capability and the combined testing claim require the actual configured system; optional redundant solenoids and manual-reset arrangements are not standard on every valve.
Features and benefits
- A replaceable actuator supports service without replacing the entire valve.
- Optional partial-stroke testing checks movement without stopping process flow.
Published application context
- Fuel-gas safety shutoff and venting
Pressure Specifications
- Actuator Pressure Requirement
- 40-100 psig (varies by series)
- Operating Pressure Range
- Up to 255 psig (varies by size and configuration)
Standards & Certifications
- Hazardous Location Approvals
- Non-Incendive: FM, CSA, EN161, IECEx, UKCA (GAR), SIL 3 capable, Inmetro certified, KTL, CCC, API 6FA; Intrinsically Safe: FM, CSA, EN161, IECEx, UKCA (GAR), UKCA (ATEX), ATEX, SIL 3 capable, Inmetro, KTL, CCC, EAC EX, CCC, API 6FA
- Approvals
- General Purpose Valves: FM, CSA, UKCA, EN161, PED, EAC, SIL 3 capable, API 6FA
Actuation, Valve & Motion Control Specifications
- Visual Position Indicator
- 360 deg top-mounted, configurable (red/green or yellow/black)
- Opening Time
- ~1 to 3 seconds (size-dependent)
- Closing Time
- <1 seconds
- Valve Type
- Pneumatically actuated shut-off and vent valves
Environmental Conditions
- Ambient Temperature Range
- -40 to 140 deg F (option for -58 to 140 deg F); IS versions: up to 122 deg F
- Enclosure Rating
- NEMA 4, NEMA 4X, IP65
Fluid/Media/Component Temperatures
- Fluid Temperature Range
- -40 to 212 deg F (option for -58 to 212 deg F)
Material Specifications
- Valve Body Material
- Cast Iron, Carbon Steel, Low Temp Carbon Steel, Stainless Steel
- Trim Materials
- Various trim options available depending on fuel gas including: 400 SS Seat/Hardened Ductile Iron Disc /PEEK follower for clean gases, 300SS Seat/300SS Disc/PEEK follower400 Series Stainless Steel for corrosive gases, and 300SS Seat/300SS Disc/300SS Follower for Firesafe applications
- Seal Material
- Buna-N, Viton, Ethylene Propylene, Omniflex
Electrical & Signal Specifications
- Electrical Rating
- 24 VDC, 120 VAC, 240 VAC; NEMA 4, 4X, IP65
Connections & Interfaces
- Connection Type
- NPT, ISO Threaded, ANSI/DIN/EN Flanged, Socket Welded with 150#/300# flanges
Dimensions & Size Specifications
- Valve Sizes
- 3/4 (DN20) to 8 in (DN200)
Actuation, Control & Motion Characteristics
- Switch Type
- SPDT (VOS1/VCS1, VOS2/VCS2), IP67 Standard for Non-Incendive Valves, Optional for Intrinsically Safe Valves
Processing & Performance Metrics
- Cycle Life
- CSA: 100,000; FM: 20,000; EN161: up to 200,000 (≤3 in)
| Parameter | Published value / configuration |
|---|---|
| Actuator Pressure Requirement | 40-100 psig (varies by series) |
| Operating Pressure Range | Up to 255 psig (varies by size and configuration) |
| Hazardous Location Approvals | Non-Incendive: FM, CSA, EN161, IECEx, UKCA (GAR), SIL 3 capable, Inmetro certified, KTL, CCC, API 6FA; Intrinsically Safe: FM, CSA, EN161, IECEx, UKCA (GAR), UKCA (ATEX), ATEX, SIL 3 capable, Inmetro, KTL, CCC, EAC EX, CCC, API 6FA |
| Approvals | General Purpose Valves: FM, CSA, UKCA, EN161, PED, EAC, SIL 3 capable, API 6FA |
| Visual Position Indicator | 360 deg top-mounted, configurable (red/green or yellow/black) |
| Opening Time | ~1 to 3 seconds (size-dependent) |
| Closing Time | <1 seconds |
| Valve Type | Pneumatically actuated shut-off and vent valves |
| Ambient Temperature Range | -40 to 140 deg F (option for -58 to 140 deg F); IS versions: up to 122 deg F |
| Enclosure Rating | NEMA 4, NEMA 4X, IP65 |
| Fluid Temperature Range | -40 to 212 deg F (option for -58 to 212 deg F) |
| Valve Body Material | Cast Iron, Carbon Steel, Low Temp Carbon Steel, Stainless Steel |
| Trim Materials | Various trim options available depending on fuel gas including: 400 SS Seat/Hardened Ductile Iron Disc /PEEK follower for clean gases, 300SS Seat/300SS Disc/PEEK follower400 Series Stainless Steel for corrosive gases, and 300SS Seat/300SS Disc/300SS Follower for Firesafe applications |
| Seal Material | Buna-N, Viton, Ethylene Propylene, Omniflex |
| Electrical Rating | 24 VDC, 120 VAC, 240 VAC; NEMA 4, 4X, IP65 |
| Connection Type | NPT, ISO Threaded, ANSI/DIN/EN Flanged, Socket Welded with 150#/300# flanges |
| Valve Sizes | 3/4 (DN20) to 8 in (DN200) |
| Switch Type | SPDT (VOS1/VCS1, VOS2/VCS2), IP67 Standard for Non-Incendive Valves, Optional for Intrinsically Safe Valves |
| Cycle Life | CSA: 100,000; FM: 20,000; EN161: up to 200,000 (≤3 in) |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 0100470-000002 | 01004700-A1B-B0B622A120 | Request quotation |
| 038S8132 | .38" NI Pneumatic Oil Shut-Off Valve | Request quotation |
| 038S8133 | .38" IS Pneumatic Oil Shut-Off Valve | Request quotation |
| 038S8134 | .38" Pneumatic Oil Shut-Off Valve Body | Request quotation |
| 050S8132 | .5" NI Pneumatic Oil Shut-Off Valve | Request quotation |
| 050S8133 | .5" IS Pneumatic Oil Shut-Off Valve | Request quotation |
| 050S8134 | .5" Pneumatic Oil Shut-Off Valve Body | Request quotation |
| 075S8111 | .75" GP Pneumatic Shut-Off Valve | Request quotation |
| 075S8113 | .75" IS Pneumatic Shut-Off Valve | Request quotation |
| 075S8114 | .75" Pneumatic Shut-Off Valve Body | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Series 8000 Product Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
