Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Shutoff Valves

NI Series Hazardous Location Safety Shut-off Valves

NI electromechanical valves provide rapid shutoff and optional normally open vent/purge service for hazardous-location installations.

NI electromechanical valves provide rapid shutoff and optional normally open vent/purge service for hazardous-location installations. Materials, reset operators and position switches adapt the package. The source contains differing headline and detailed line-pressure figures, so pressure must be verified for the exact valve rather than treated as one unconditional family rating.

Features & Benefits

Approvals
Factory Mutual approval for hazardous locations, Industrial Risk Insurers for block/bleed/vent systems, FM 7400 standard compliance, CSA 6.5 standard compliance, Non-Incendive Component Criteria per NEC/NFPA 70-1996, Article 500-2(a)(6), Valve bodies designed to ANSI; ISO standards also available
Hazardous Location Approvals
Class I Div 2 (Groups A, B, C, D); Class II Div 2 (Groups F, G); Class III Div 2
Flow Coefficient (Cv/Kvs)
Cv flow factors up to 765
Ambient Temperature Range
-20 to +140 deg F (-28 to +60 deg C)
Position Switch Options
SPDT signal switches, proof-of-open/closed switches
Valve Body Material
One-piece cast iron or cast steel
Temperature Rating
Fluid - Rising stem: -20 to +140 deg F (-28 to +60 deg C)|Swinging gate: -20 to +250 deg F (-28 to +121 deg C)
Position Indicator
Large two-color open-shut indicator
Temperature Class
T5 (AC)
Enclosure Rating
NEMA 1, 3, 3S, 4, 12; Optional NEMA 4X trim
Line Pressure
Up to 600 psig
Product Type
Electrically actuated safety shut‑off and vent valves for hazardous locations
Valve Sizes
3/4 to 6 in diameter line sizes
Body Design
Straight‑through flow using swinging gate or rising stem (guillotine action) designs
Valve Type
Shut-off and vent valves (electrically actuated)
Handles flowing fluid temperatures
– Rising stem bodies from -20°F (-28°C) to +140°F (+60°C) – Swinging gate bodies from -20°F (-28°C) to +250°F (+121°C) – Any ambient temperature from -20°F (-28°C) to +140°F (+60°C)
  • Rotatable top assemblies and built-in terminals simplify installation.

Applications

  • Hazardous-location fuel shutoff
  • Vent/purge duty with normally open versions

Detailed capabilities

Hazardous-location shutdown and purge variants

NI valves use electromechanical actuation and metal seating for rapid gas/oil closure, with normally open variants described for vent or purge lines. The source lists non-incendive hazardous-location groups and temperature classifications. The body design may be rising-stem or swinging-gate, and those constructions have different flowing-fluid temperature limits. Ambient limits are separately specified and must not be substituted for fluid limits.

Manufacturer reference ↗

Reset, position indication and pressure discrepancy

Manual or automatic reset, auxiliary signalling and proof-of-position switches adapt the top assembly. A built-in wiring compartment and rotatable operator simplify installation, while wheel-and-chain operation is offered for overhead manual-reset arrangements. The overview gives a 125 psig line-pressure statement, but the detailed list gives 600 psig. This contradiction is retained; the valve-specific documentation must resolve it before a working-pressure rating is selected.

Manufacturer reference ↗

Features and benefits

  • Rotatable top assemblies and built-in terminals simplify installation.

Manufacturer reference ↗

Published application context

  • Hazardous-location fuel shutoff
  • Vent/purge duty with normally open versions

Manufacturer reference ↗

Technical facts in the product overview

  • Handles flowing fluid temperatures: – Rising stem bodies from -20°F (-28°C) to +140°F (+60°C) – Swinging gate bodies from -20°F (-28°C) to +250°F (+121°C) – Any ambient temperature from -20°F (-28°C) to +140°F (+60°C)

Manufacturer reference ↗

Specifications

Standards & Certifications

Approvals
Factory Mutual approval for hazardous locations, Industrial Risk Insurers for block/bleed/vent systems, FM 7400 standard compliance, CSA 6.5 standard compliance, Non-Incendive Component Criteria per NEC/NFPA 70-1996, Article 500-2(a)(6), Valve bodies designed to ANSI; ISO standards also available
Hazardous Location Approvals
Class I Div 2 (Groups A, B, C, D); Class II Div 2 (Groups F, G); Class III Div 2

Performance, Flow & Capacity

Flow Coefficient (Cv/Kvs)
Cv flow factors up to 765

Environmental Conditions

Ambient Temperature Range
-20 to +140 deg F (-28 to +60 deg C)
Enclosure Rating
NEMA 1, 3, 3S, 4, 12; Optional NEMA 4X trim

Actuation, Valve & Motion Control Specifications

Position Switch Options
SPDT signal switches, proof-of-open/closed switches
Position Indicator
Large two-color open-shut indicator
Valve Type
Shut-off and vent valves (electrically actuated)

Material Specifications

Valve Body Material
One-piece cast iron or cast steel

Temperature Control/Measurement

Temperature Rating
Fluid - Rising stem: -20 to +140 deg F (-28 to +60 deg C); Swinging gate: -20 to +250 deg F (-28 to +121 deg C)
Temperature Class
T5 (AC)

Pressure Specifications

Line Pressure
Up to 600 psig

Overview

Product Type
Electrically actuated safety shut‑off and vent valves for hazardous locations

Dimensions & Size Specifications

Valve Sizes
3/4 to 6 in diameter line sizes

Product Design & Configuration

Body Design
Straight‑through flow using swinging gate or rising stem (guillotine action) designs

Technical Specifications

Handles flowing fluid temperatures
– Rising stem bodies from -20°F (-28°C) to +140°F (+60°C) – Swinging gate bodies from -20°F (-28°C) to +250°F (+121°C) – Any ambient temperature from -20°F (-28°C) to +140°F (+60°C)
NI Series Hazardous Location Safety Shut-off Valves — manufacturer page values
ParameterPublished value / configuration
ApprovalsFactory Mutual approval for hazardous locations, Industrial Risk Insurers for block/bleed/vent systems, FM 7400 standard compliance, CSA 6.5 standard compliance, Non-Incendive Component Criteria per NEC/NFPA 70-1996, Article 500-2(a)(6), Valve bodies designed to ANSI; ISO standards also available
Hazardous Location ApprovalsClass I Div 2 (Groups A, B, C, D); Class II Div 2 (Groups F, G); Class III Div 2
Flow Coefficient (Cv/Kvs)Cv flow factors up to 765
Ambient Temperature Range-20 to +140 deg F (-28 to +60 deg C)
Enclosure RatingNEMA 1, 3, 3S, 4, 12; Optional NEMA 4X trim
Position Switch OptionsSPDT signal switches, proof-of-open/closed switches
Position IndicatorLarge two-color open-shut indicator
Valve TypeShut-off and vent valves (electrically actuated)
Valve Body MaterialOne-piece cast iron or cast steel
Temperature RatingFluid - Rising stem: -20 to +140 deg F (-28 to +60 deg C); Swinging gate: -20 to +250 deg F (-28 to +121 deg C)
Temperature ClassT5 (AC)
Line PressureUp to 600 psig
Product TypeElectrically actuated safety shut‑off and vent valves for hazardous locations
Valve Sizes3/4 to 6 in diameter line sizes
Body DesignStraight‑through flow using swinging gate or rising stem (guillotine action) designs
Handles flowing fluid temperatures– Rising stem bodies from -20°F (-28°C) to +140°F (+60°C) – Swinging gate bodies from -20°F (-28°C) to +250°F (+121°C) – Any ambient temperature from -20°F (-28°C) to +140°F (+60°C)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

2 parts

Part NumberDescriptionEnquiry
075S8112.75" NI Pneumatic Shut-Off ValveRequest quotation
100S81221" NI Pneumatic Vent ValveRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/fuel-and-air-delivery/shutoff-valves/ni-series-hazardous-location-safety-shut-off-valves

Last source check: 2026-11-02

NI Series Hazardous Duty Valves Product Image · Manufacturer ownership retained; republication licence not independently confirmed

NI Series Hazardous Duty Valves Product Image 1 · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry