Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Shutoff Valves

High Pressure Electro-Mechanical Gas Safety Shut-off Valves

MAXON high-pressure electromechanical gas valves use spring closure and metal seating for rapid fuel isolation.

MAXON high-pressure electromechanical gas valves use spring closure and metal seating for rapid fuel isolation. Body materials, trims and connections support different gases, including specially configured corrosive or oxygen service. Position indication, rotatable top assemblies and manual/automatic reset choices support installation; hazardous-area and SIL capabilities retain their published qualifications.

Features & Benefits

Hazardous Location Approvals
FM, CSA, IECEx, KTL, CCC (model‑dependent)
Flow Coefficient (Cv/Kvs)
Varies by size and model; up to 1172 Cv for 6 in high capacity
Maximum Line Pressure
Line pressures up to 125 psig
Maintenance Interval
Minimal; annual operational and leak testing recommended
Valve Body Material
Cast Iron, Carbon Steel, Low‑Temperature Carbon Steel, Or Stainless Steel
Valve Closure Time
<1 seconds (spring return)
Temperature Rating
-20 to 125 deg F (H Models)|-20 to 140 deg F (S and C Models)|0 deg F min for oxygen service
Visual Indication
Open/Closed window indicator
Valve Orientation
Top assembly rotatable in 90 deg increments
Electrical Rating
Motors: up to 667 VA; PCB: up to 25 VA|Solenoids: 23 to 40 VA (AC), 14 to 34 W (DC)
Mounting Options
Horizontal or vertical installation|Threaded, Flanged, Socket Welded
Switch Options
VOS (Valve Open Switch), VCS (Valve Closed Switch), SPDT, DPDT
Seal Material
Buna, Viton, Ethylene Propylene, Omniflex
Nominal Sizes
3/4 to 6 in (DN20 to DN150)
Actuator Type
Electro‑mechanical actuator with solenoid and either Automatic or Manual Reset Actuators
Product Type
Electrically actuated electro‑mechanical gas safety shut‑off valve
Valve Type
Shut-off (Normally Closed), Vent (Normally Open)
Cycle Life
6,000-20,000 (manual) depending on standards|Approved for: up to 200,000 cycles (automatic)
Approvals
UL, CSA, FM, CE, SIL 3 (IEC 61508), AGA, GAR, PED, LVD, EMC, IECEx, KTL, Chinese GB
  • Rotatable operators and visible indication simplify installation and observation.
  • The bonnet design avoids periodic packing adjustment.

Applications

  • Configured industrial gas safety shutoff

Detailed capabilities

Fast closure and configurable fuel-service construction

A powerful spring closes the electromechanical valve in under one second. Material and trim choices include cast iron and several steels, with specially configured options for corrosive gases or oxygen. Normally open or closed arrangements and manual or automatic reset operators support different train functions. These selections are part of the exact ordered valve, not simultaneous capabilities of one universal configuration.

Manufacturer reference ↗

Position checking, installation and qualification

Visual indication and overtravel position switches expose open/closed status. Top assemblies rotate in 90-degree steps to fit piping, while the bonnet arrangement avoids routine packing adjustment and reduces closing drag. The source states class-VI leakage performance and SIL 3 capability under their named standards, with hazardous-location and regional approval qualifications retained for the relevant valve arrangement.

Manufacturer reference ↗

Features and benefits

  • Rotatable operators and visible indication simplify installation and observation.
  • The bonnet design avoids periodic packing adjustment.

Manufacturer reference ↗

Published application context

  • Configured industrial gas safety shutoff

Manufacturer reference ↗

Specifications

Standards & Certifications

Hazardous Location Approvals
FM, CSA, IECEx, KTL, CCC (model‑dependent)
Approvals
UL, CSA, FM, CE, SIL 3 (IEC 61508), AGA, GAR, PED, LVD, EMC, IECEx, KTL, Chinese GB

Performance, Flow & Capacity

Flow Coefficient (Cv/Kvs)
Varies by size and model; up to 1172 Cv for 6 in high capacity

Pressure Specifications

Maximum Line Pressure
Line pressures up to 125 psig

Electrical Specifications

Maintenance Interval
Minimal; annual operational and leak testing recommended

Material Specifications

Valve Body Material
Cast Iron, Carbon Steel, Low‑Temperature Carbon Steel, Or Stainless Steel
Seal Material
Buna, Viton, Ethylene Propylene, Omniflex

Actuation, Valve & Motion Control Specifications

Valve Closure Time
<1 seconds (spring return)
Valve Orientation
Top assembly rotatable in 90 deg increments
Actuator Type
Electro‑mechanical actuator with solenoid and either Automatic or Manual Reset Actuators
Valve Type
Shut-off (Normally Closed), Vent (Normally Open)

Temperature Control/Measurement

Temperature Rating
-20 to 125 deg F (H Models); -20 to 140 deg F (S and C Models); 0 deg F min for oxygen service

System Monitoring, Indication & Status

Visual Indication
Open/Closed window indicator

Electrical & Signal Specifications

Electrical Rating
Motors: up to 667 VA; PCB: up to 25 VA; Solenoids: 23 to 40 VA (AC), 14 to 34 W (DC)

Installation & Mounting Specifications

Mounting Options
Horizontal or vertical installation; Threaded, Flanged, Socket Welded

Actuation, Control & Motion Characteristics

Switch Options
VOS (Valve Open Switch), VCS (Valve Closed Switch), SPDT, DPDT

Dimensions & Size Specifications

Nominal Sizes
3/4 to 6 in (DN20 to DN150)

Overview

Product Type
Electrically actuated electro‑mechanical gas safety shut‑off valve

Processing & Performance Metrics

Cycle Life
6,000-20,000 (manual) depending on standards; Approved for: up to 200,000 cycles (automatic)
High Pressure Electro-Mechanical Gas Safety Shut-off Valves — manufacturer page values
ParameterPublished value / configuration
Hazardous Location ApprovalsFM, CSA, IECEx, KTL, CCC (model‑dependent)
ApprovalsUL, CSA, FM, CE, SIL 3 (IEC 61508), AGA, GAR, PED, LVD, EMC, IECEx, KTL, Chinese GB
Flow Coefficient (Cv/Kvs)Varies by size and model; up to 1172 Cv for 6 in high capacity
Maximum Line PressureLine pressures up to 125 psig
Maintenance IntervalMinimal; annual operational and leak testing recommended
Valve Body MaterialCast Iron, Carbon Steel, Low‑Temperature Carbon Steel, Or Stainless Steel
Seal MaterialBuna, Viton, Ethylene Propylene, Omniflex
Valve Closure Time<1 seconds (spring return)
Valve OrientationTop assembly rotatable in 90 deg increments
Actuator TypeElectro‑mechanical actuator with solenoid and either Automatic or Manual Reset Actuators
Valve TypeShut-off (Normally Closed), Vent (Normally Open)
Temperature Rating-20 to 125 deg F (H Models); -20 to 140 deg F (S and C Models); 0 deg F min for oxygen service
Visual IndicationOpen/Closed window indicator
Electrical RatingMotors: up to 667 VA; PCB: up to 25 VA; Solenoids: 23 to 40 VA (AC), 14 to 34 W (DC)
Mounting OptionsHorizontal or vertical installation; Threaded, Flanged, Socket Welded
Switch OptionsVOS (Valve Open Switch), VCS (Valve Closed Switch), SPDT, DPDT
Nominal Sizes3/4 to 6 in (DN20 to DN150)
Product TypeElectrically actuated electro‑mechanical gas safety shut‑off valve
Cycle Life6,000-20,000 (manual) depending on standards; Approved for: up to 200,000 cycles (automatic)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
018428VCS-1(SOV)VOS-1(STO)SWITCH SETRequest quotation
018429VCS-2(SOV)VOS-2(STO)SWITCH SETRequest quotation
075SMA11.75" E/M STD FLOW GP AUTO SHUT-OFF VALVERequest quotation
075SMA12.75" E/M STD FLOW NI AUTO SHUT-OFF VALVERequest quotation
075SMA21.75" E/M STD FLOW GP AUTO VENT VALVERequest quotation
075SMA22.75" E/M STD FLOW NI AUTO VENT VALVERequest quotation
075SMM11.75" E/M STD FLOW GP MAN SHUT-OFF VALVERequest quotation
075SMM12.75" E/M STD FLOW NI MAN SHUT-OFF VALVERequest quotation
075SMM21.75" E/M STD FLOW GP MAN VENT VALVERequest quotation
075SMM22.75" E/M STD FLOW NI MAN VENT VALVERequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/fuel-and-air-delivery/shutoff-valves/high-pressure-electro-mechanical-gas-safety-shut-off-valves

Last source check: 2026-11-02

Hi Pressure Electro-Mechanical Gas Shut-off Valves Product Image · Manufacturer ownership retained; republication licence not independently confirmed

Hi Pressure Electro-Mechanical Gas Shut-off Valves Product Image 1 · Manufacturer ownership retained; republication licence not independently confirmed

Hi Pressure Electro-Mechanical Gas Shut-off Valves Product Image 2 · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry