Shutoff Valves
High Pressure Electro-Mechanical Oil Safety Shut-off Valves
These electromechanical oil valves provide rapid shutoff through a metal-seated body, with manual or automatic reset operators.
These electromechanical oil valves provide rapid shutoff through a metal-seated body, with manual or automatic reset operators. Straight-through swinging-gate construction limits pressure loss, while a visible position indicator and rotatable top assembly support installation. The source separately specifies fluid, ambient, size and line-pressure limits for the oil-service arrangement.
Features & Benefits
- Sizes
- 3/8 to 1-1/4 in (DN10 to DN32)
- Valve Body Connection Options
- ANSI/ISO threaded, flanged, nippled with 150#/300#/600# flanges
- Hazardous Location Approvals
- FM, CSA, IECEx, KTL, CCC (model‑dependent)
- Flow Coefficient (Cv/Kvs)
- Up to 45
- Ambient Temperature Range
- -20 to 140 deg F (-28 to +60 deg C)|Some models limited to 125 deg F
- Fluid Temperature Range
- -20 to 550 deg F (-28 to +288 deg C) depending on model
- Valve Body Material
- Cast Iron, Cast Steel
- Fluid Compatibility
- Fuel oils (#1, #2, preheated #4-#6), kerosene, JP-4, LPG, non-combustible gases
- Valve Closure Time
- <1 seconds
- Electrical Rating
- Motor: up to 220 VA; DC options available|Solenoid: 22 to 24 VA
- Mounting Options
- Horizontal preferred; top assembly rotatable in 90 deg increments
- Enclosure Rating
- IP65, NEMA 1, 3, 3S, 4, 12; Optional NEMA 4X (model‑dependent)
- Trim Materials
- Hard-Faced Steel, 420 Stainless Steel, Ductile Iron, PEEK Inserts
- Switch Options
- VOS (Valve Open Switch), VCS (Valve Closed Switch), SPDT, DPDT
- Seal Material
- Viton, Teflon, Grafoil (depending on Trim)
- Line Pressure
- Up to 550 psig
- Actuator Type
- Motorized automatic or manual reset
- Product Type
- Electrically actuated electro‑mechanical liquid fuel safety shut‑off valve
- Valve Type
- Electro-mechanical shut-off valve (normally closed)
- Cycle Life
- 20,000 (manual)|Up to 100,000 cycles (automatic)
- Approvals
- UL, CSA, FM for General Purpose Valves
- Handles flowing fluid temperatures
- Swinging gate bodies from -20°F (-28°C) to +550°F (+288°C) Any ambient temperature from -20°F (-28°C) to +140°F (+60°C)
- Straight-through bodies reduce pressure loss.
Applications
- Industrial oil-line safety shutoff
Detailed capabilities
Oil-flow and ambient temperatures are separate
The oil valve's swinging-gate body supports the stated flowing-fluid range, while the operator has a lower ambient limit. Straight-through flow minimizes line pressure loss. Manual or motorized automatic reset, rotatable top assemblies and a large position indicator adapt operation and piping. Special Service packages add their own features; these should not be assumed present on every standard oil valve.
Features and benefits
- Straight-through bodies reduce pressure loss.
Published application context
- Industrial oil-line safety shutoff
Technical facts in the product overview
- Handles flowing fluid temperatures: Swinging gate bodies from -20°F (-28°C) to +550°F (+288°C) Any ambient temperature from -20°F (-28°C) to +140°F (+60°C)
Dimensions & Size Specifications
- Sizes
- 3/8 to 1-1/4 in (DN10 to DN32)
Connections & Interfaces
- Valve Body Connection Options
- ANSI/ISO threaded, flanged, nippled with 150#/300#/600# flanges
Standards & Certifications
- Hazardous Location Approvals
- FM, CSA, IECEx, KTL, CCC (model‑dependent)
- Approvals
- UL, CSA, FM for General Purpose Valves
Performance, Flow & Capacity
- Flow Coefficient (Cv/Kvs)
- Up to 45
Environmental Conditions
- Ambient Temperature Range
- -20 to 140 deg F (-28 to +60 deg C); Some models limited to 125 deg F
- Enclosure Rating
- IP65, NEMA 1, 3, 3S, 4, 12; Optional NEMA 4X (model‑dependent)
Fluid/Media/Component Temperatures
- Fluid Temperature Range
- -20 to 550 deg F (-28 to +288 deg C) depending on model
Material Specifications
- Valve Body Material
- Cast Iron, Cast Steel
- Trim Materials
- Hard-Faced Steel, 420 Stainless Steel, Ductile Iron, PEEK Inserts
- Seal Material
- Viton, Teflon, Grafoil (depending on Trim)
Applications & Compatibility
- Fluid Compatibility
- Fuel oils (#1, #2, preheated #4-#6), kerosene, JP-4, LPG, non-combustible gases
Actuation, Valve & Motion Control Specifications
- Valve Closure Time
- <1 seconds
- Actuator Type
- Motorized automatic or manual reset
- Valve Type
- Electro-mechanical shut-off valve (normally closed)
Electrical & Signal Specifications
- Electrical Rating
- Motor: up to 220 VA; DC options available; Solenoid: 22 to 24 VA
Installation & Mounting Specifications
- Mounting Options
- Horizontal preferred; top assembly rotatable in 90 deg increments
Actuation, Control & Motion Characteristics
- Switch Options
- VOS (Valve Open Switch), VCS (Valve Closed Switch), SPDT, DPDT
Pressure Specifications
- Line Pressure
- Up to 550 psig
Overview
- Product Type
- Electrically actuated electro‑mechanical liquid fuel safety shut‑off valve
Processing & Performance Metrics
- Cycle Life
- 20,000 (manual); Up to 100,000 cycles (automatic)
Technical Specifications
- Handles flowing fluid temperatures
- Swinging gate bodies from -20°F (-28°C) to +550°F (+288°C) Any ambient temperature from -20°F (-28°C) to +140°F (+60°C)
| Parameter | Published value / configuration |
|---|---|
| Sizes | 3/8 to 1-1/4 in (DN10 to DN32) |
| Valve Body Connection Options | ANSI/ISO threaded, flanged, nippled with 150#/300#/600# flanges |
| Hazardous Location Approvals | FM, CSA, IECEx, KTL, CCC (model‑dependent) |
| Approvals | UL, CSA, FM for General Purpose Valves |
| Flow Coefficient (Cv/Kvs) | Up to 45 |
| Ambient Temperature Range | -20 to 140 deg F (-28 to +60 deg C); Some models limited to 125 deg F |
| Enclosure Rating | IP65, NEMA 1, 3, 3S, 4, 12; Optional NEMA 4X (model‑dependent) |
| Fluid Temperature Range | -20 to 550 deg F (-28 to +288 deg C) depending on model |
| Valve Body Material | Cast Iron, Cast Steel |
| Trim Materials | Hard-Faced Steel, 420 Stainless Steel, Ductile Iron, PEEK Inserts |
| Seal Material | Viton, Teflon, Grafoil (depending on Trim) |
| Fluid Compatibility | Fuel oils (#1, #2, preheated #4-#6), kerosene, JP-4, LPG, non-combustible gases |
| Valve Closure Time | <1 seconds |
| Actuator Type | Motorized automatic or manual reset |
| Valve Type | Electro-mechanical shut-off valve (normally closed) |
| Electrical Rating | Motor: up to 220 VA; DC options available; Solenoid: 22 to 24 VA |
| Mounting Options | Horizontal preferred; top assembly rotatable in 90 deg increments |
| Switch Options | VOS (Valve Open Switch), VCS (Valve Closed Switch), SPDT, DPDT |
| Line Pressure | Up to 550 psig |
| Product Type | Electrically actuated electro‑mechanical liquid fuel safety shut‑off valve |
| Cycle Life | 20,000 (manual); Up to 100,000 cycles (automatic) |
| Handles flowing fluid temperatures | Swinging gate bodies from -20°F (-28°C) to +550°F (+288°C) Any ambient temperature from -20°F (-28°C) to +140°F (+60°C) |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 00381517 | .38" SANCTIONED AUTO OIL NA S-O VALVE | Request quotation |
| 00381517U | .38" NON-SANCTION AUTO OIL NA S-O VALVE | Request quotation |
| 00388700 | .38" SANCTIONED AUTO OIL SHUT-OFF VALVE | Request quotation |
| 00388790 | .38" NON-SANCTIONED AUTO OIL S-O VALVE | Request quotation |
| 00501517 | .5" SANCTIONED AUTO OIL NA S-O VALVE | Request quotation |
| 00501517U | .5" NON-SANCTIONED AUTO OIL NA S-O VALVE | Request quotation |
| 00508700 | .5" SANCTIONED AUTO OIL SHUT-OFF VALVE | Request quotation |
| 00508790 | .5" NON-SANCTIONED AUTO OIL S-O VALVE | Request quotation |
| 00751517 | .75" SANCTIONED AUTO OIL NA S-O VALVE | Request quotation |
| 00751517U | .75" NON-SANCTION AUTO OIL NA S-O VALVE | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Hi Pressure Electro-Mechanical Oil Shut-off Valves Product Image · Manufacturer ownership retained; republication licence not independently confirmed
Hi Pressure Electro-Mechanical Oil Shut-off Valves Product Image 1 · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
