Burner Control Units
Burner control unit BCU 570
BCU 570 mounts on a cabinet DIN rail to control, ignite and supervise individual or forced-draught burners.
BCU 570 mounts on a cabinet DIN rail to control, ignite and supervise individual or forced-draught burners. It also handles pressure supervision, valve proving and purge functions. Actuator control establishes the ignition position, while UV or ionization sensing supports the published intermittent and continuous operating modes.
Features & Benefits
- Ambient Temperature Range
- -20 to +60 deg C
- Valve Output Rating
- Max 1 A each, total max 2.5 A
- Tightness Control
- Integrated valve proving system (C1 variant), programmable test period
- Software Interface
- BCSoft (Windows), opto-adapter PCO 200
- Signal Input
- Start-Up, Controlled Air Flow, Remote Reset, Safety Interlock, Pressure Switches
- Maximum Operating Cycles
- Actuator: 250,000|Buttons: 10,000|Fault signal contact: 10,000
- Manual Mode
- Available; configurable operating time
- Mains Voltage
- 120 VAC (Q), 230 VAC (W), ±15%, 50/60 Hz
- Ignition Type
- Direct or pilot burner ignition (intermittent or continuous operation)
- Flame Signal Current
- Ionization: 1-25 µA|UV: 1-35 µA
- Flame Control
- Flame rod, UVS (intermittent), UVC (continuous)
- Fieldbus Interface
- Optional BCM 500 module for PROFINET or Modbus TCP
- Fan Output Rating
- Max 3 A, start-up current max 6 A < 1 s
- Enclosure Rating
- IP20 (device), IP54 (installation cabinet), IP65 (OCU external)
- Display Type
- LED segment display with fault/status codes
- Dimensions
- 110 x 100 x 102 mm
- Control Output
- Fan, ignition, gas valves V1-V4, actuator, controller enable
- Approvals
- EN 746‑2, EN 676, SIL up to 3, PL e Safety Standard, EU (LVD, EMC, GAR), ANSI/CSA, FM, UL, AGA, EAC
Applications
- Individual and forced-draught burner control
Environmental Conditions
- Ambient Temperature Range
- -20 to +60 deg C
- Enclosure Rating
- IP20 (device), IP54 (installation cabinet), IP65 (OCU external)
Actuation, Valve & Motion Control Specifications
- Valve Output Rating
- Max 1 A each, total max 2.5 A
- Tightness Control
- Integrated valve proving system (C1 variant), programmable test period
Control, Software & User Interface Specifications
- Software Interface
- BCSoft (Windows), opto-adapter PCO 200
- Display Type
- LED segment display with fault/status codes
Inputs, Outputs & Signal Interfaces
- Signal Input
- Start-Up, Controlled Air Flow, Remote Reset, Safety Interlock, Pressure Switches
Operating Limits & Resistance
- Maximum Operating Cycles
- Actuator: 250,000; Buttons: 10,000; Fault signal contact: 10,000
Control, Logic & Functional Behavior
- Manual Mode
- Available; configurable operating time
- Control Output
- Fan, ignition, gas valves V1-V4, actuator, controller enable
Electrical Specifications
- Mains Voltage
- 120 VAC (Q), 230 VAC (W), ±15%, 50/60 Hz
- Flame Signal Current
- Ionization: 1-25 µA; UV: 1-35 µA
Ignition, Flame & Supervision Specifications
- Ignition Type
- Direct or pilot burner ignition (intermittent or continuous operation)
- Flame Control
- Flame rod, UVS (intermittent), UVC (continuous)
Communication & Interfaces
- Fieldbus Interface
- Optional BCM 500 module for PROFINET or Modbus TCP
Combustion Air, Blower & Emissions Specifications
- Fan Output Rating
- Max 3 A, start-up current max 6 A < 1 s
Dimensions & Weight
- Dimensions
- 110 x 100 x 102 mm
Standards & Certifications
- Approvals
- EN 746‑2, EN 676, SIL up to 3, PL e Safety Standard, EU (LVD, EMC, GAR), ANSI/CSA, FM, UL, AGA, EAC
Applications & Compatibility
- Applications
- Controls, ignites, and monitors industrial burners (directly ignited or pilot‑ignited)
| Parameter | Published value / configuration |
|---|---|
| Ambient Temperature Range | -20 to +60 deg C |
| Enclosure Rating | IP20 (device), IP54 (installation cabinet), IP65 (OCU external) |
| Valve Output Rating | Max 1 A each, total max 2.5 A |
| Tightness Control | Integrated valve proving system (C1 variant), programmable test period |
| Software Interface | BCSoft (Windows), opto-adapter PCO 200 |
| Display Type | LED segment display with fault/status codes |
| Signal Input | Start-Up, Controlled Air Flow, Remote Reset, Safety Interlock, Pressure Switches |
| Maximum Operating Cycles | Actuator: 250,000; Buttons: 10,000; Fault signal contact: 10,000 |
| Manual Mode | Available; configurable operating time |
| Control Output | Fan, ignition, gas valves V1-V4, actuator, controller enable |
| Mains Voltage | 120 VAC (Q), 230 VAC (W), ±15%, 50/60 Hz |
| Flame Signal Current | Ionization: 1-25 µA; UV: 1-35 µA |
| Ignition Type | Direct or pilot burner ignition (intermittent or continuous operation) |
| Flame Control | Flame rod, UVS (intermittent), UVC (continuous) |
| Fieldbus Interface | Optional BCM 500 module for PROFINET or Modbus TCP |
| Fan Output Rating | Max 3 A, start-up current max 6 A < 1 s |
| Dimensions | 110 x 100 x 102 mm |
| Approvals | EN 746‑2, EN 676, SIL up to 3, PL e Safety Standard, EU (LVD, EMC, GAR), ANSI/CSA, FM, UL, AGA, EAC |
| Applications | Controls, ignites, and monitors industrial burners (directly ignited or pilot‑ignited) |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 1188567 | KROM BRNR CTL UNIT BCU 570+ | Request quotation |
| KS88660256 | BCU 570QC1F1U0K2-E | Request quotation |
| KS88660782 | BCU570WC1F2U0K1-E | Request quotation |
| KS88661053 | BCU570WC0F1U0K1-E | Request quotation |
| KS88661107 | BCU570WC1F1U0K2-E | Request quotation |
| KS88661182 | BCU570WC0F1U0K1-E | Request quotation |
| KS88661279 | BCU570WC0F1U0K1-E | Request quotation |
| KS88661291 | BCU570WC1F1U0K1-E | Request quotation |
| KS88661343 | BCU570WC1F1U0K1-E | Request quotation |
| KS88661345 | BCU570WC1F1U0K1-E 1 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Protective System Control · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
