Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Smartlink/Smartfire

SMARTLINK® Meter

SMARTLINK METER derives mass flow from matched platinum temperature elements in a stainless probe.

SMARTLINK METER derives mass flow from matched platinum temperature elements in a stainless probe. Factory calibration and an inline flow-conditioning body support installation, while a local display, totalizer and analog I/O expose measurements. Linking two meters adds ratio observation, and redundant self-checking provides alarm and status outputs for supervisory integration.

Features & Benefits

Sizes
Natural Gas Models - 2, 3, 4, 6 in nominal sizes, Air Models - 8, 12, 16, 20, 24, 28 in nominal sizes
Hazardous Location Approvals
FM Approved: Class I and II Div 2; Class I Zone 2; ATEX/IECEx/UKCA
Ambient Temperature Range
-40 to +70 deg C (measurement)|LCD viewing -20 to +50 deg C
Fluid Temperature Range
-40 to +100 deg C
Alarm and Event Logging
On‑board alarm, limit indication, and event log
Temperature Accuracy
±0.5 deg C
Wetted Materials
Probe: 316 SS; Flow body: Carbon Steel; Screens: 316 Stainless Steel
Enclosure Rating
IP66/NEMA 4X, 12, and 13
Alarm Signaling
NAMUR‑43 compatible 21.5 mA alarm output (configurable)
Process Fluids
Natural Gas, Air
Analog Outputs
Two isolated 4 to 20 mA outputs (Flow, Ratio or Temperature)
Relay Outputs
Three fail‑safe solid‑state relay drive outputs (Test, Alarm, Limit)
Local Display
4‑line x 20‑character LCD with membrane keypad
Flow Turndown
50:1
Flow Accuracy
<±2% additional installed error|±2% of reading over 5%-100% of flow range (20:1 turndown) [calibration stand]
Analog Inputs
One 4 to 20 mA input for external meter (ratio calculation)
Product Type
SMARTLINK® METER Digital Self‑checking Thermal Mass Flow Meter
Power Supply
24 VDC standard|Optional 115/230 VAC (50/60 Hz)
Approvals
FM Class I, Div 2; Class I, Zone 2 IIC; Class II/III Div 1/2; ATEX II 3 G/D; UKCA; KCs (KTL); CCC; IP66
  • Local configuration avoids a separate PC interface.
  • Integrated flow conditioning reduces straight-pipe requirements.

Applications

  • Air and natural-gas mass-flow measurement
  • Air/fuel ratio monitoring with linked meters

Detailed capabilities

Thermal measurement principle

The probe contains two matched platinum RTDs. One senses the process temperature; electronics heat the other to maintain a fixed temperature difference above the fluid. The power needed to sustain that difference becomes the mass-flow measurement. The factory-calibrated inline body also conditions the velocity profile and positions the probe, reducing the installation uncertainties of an unconditioned insertion probe.

Manufacturer reference ↗

Local information and linked-meter functions

A display and membrane keypad provide local setup, instantaneous rate and accumulated flow without an external computer. Analog I/O can represent flow, fluid temperature or ratio-related information, and two electrically linked meters can display the air/fuel relationship. Redundant checks provide alarm, limit and test-status information. The meters are calibrated for the stated air or natural-gas service, with hazardous-location qualification associated with the published enclosure and approval configuration.

Manufacturer reference ↗

Features and benefits

  • Local configuration avoids a separate PC interface.
  • Integrated flow conditioning reduces straight-pipe requirements.

Manufacturer reference ↗

Published application context

  • Air and natural-gas mass-flow measurement
  • Air/fuel ratio monitoring with linked meters

Manufacturer reference ↗

Specifications

Dimensions & Size Specifications

Sizes
Natural Gas Models - 2, 3, 4, 6 in nominal sizes, Air Models - 8, 12, 16, 20, 24, 28 in nominal sizes

Standards & Certifications

Hazardous Location Approvals
FM Approved: Class I and II Div 2; Class I Zone 2; ATEX/IECEx/UKCA
Approvals
FM Class I, Div 2; Class I, Zone 2 IIC; Class II/III Div 1/2; ATEX II 3 G/D; UKCA; KCs (KTL); CCC; IP66

Environmental Conditions

Ambient Temperature Range
-40 to +70 deg C (measurement); LCD viewing -20 to +50 deg C
Enclosure Rating
IP66/NEMA 4X, 12, and 13

Fluid/Media/Component Temperatures

Fluid Temperature Range
-40 to +100 deg C

Alarms, Diagnostics & Monitoring

Alarm and Event Logging
On‑board alarm, limit indication, and event log

Temperature Control/Measurement

Temperature Accuracy
±0.5 deg C

Material Specifications

Wetted Materials
Probe: 316 SS; Flow body: Carbon Steel; Screens: 316 Stainless Steel

Alarms, Status & Diagnostics

Alarm Signaling
NAMUR‑43 compatible 21.5 mA alarm output (configurable)

Fuel, Gas & Media Specifications

Process Fluids
Natural Gas, Air

Inputs, Outputs & Signal Interfaces

Analog Outputs
Two isolated 4 to 20 mA outputs (Flow, Ratio or Temperature)
Relay Outputs
Three fail‑safe solid‑state relay drive outputs (Test, Alarm, Limit)
Analog Inputs
One 4 to 20 mA input for external meter (ratio calculation)

Control, Software & User Interface Specifications

Local Display
4‑line x 20‑character LCD with membrane keypad

Processing & Performance Metrics

Flow Turndown
50:1

Performance, Flow & Capacity

Flow Accuracy
<±2% additional installed error; ±2% of reading over 5%-100% of flow range (20:1 turndown) [calibration stand]

Overview

Product Type
SMARTLINK® METER Digital Self‑checking Thermal Mass Flow Meter
Models
Air: 0800 SLM (8 in), 1200 SLM (12 in), 1600 SLM (16 in), 2000 SLM (20 in), 2400 SLM (24 in), 2800 SLM (28 in); Natural Gas: 0200 SLM (2 in), 0300 SLM (3 in), 0400 SLM (4 in), 0600 SLM (6 in)

Electrical Specifications

Power Supply
24 VDC standard; Optional 115/230 VAC (50/60 Hz)

Applications & Compatibility

Applications
Combustion air and gas flow measurement, air/fuel ratio monitoring, fuel usage tracking, emissions optimization
SMARTLINK® Meter — manufacturer page values
ParameterPublished value / configuration
SizesNatural Gas Models - 2, 3, 4, 6 in nominal sizes, Air Models - 8, 12, 16, 20, 24, 28 in nominal sizes
Hazardous Location ApprovalsFM Approved: Class I and II Div 2; Class I Zone 2; ATEX/IECEx/UKCA
ApprovalsFM Class I, Div 2; Class I, Zone 2 IIC; Class II/III Div 1/2; ATEX II 3 G/D; UKCA; KCs (KTL); CCC; IP66
Ambient Temperature Range-40 to +70 deg C (measurement); LCD viewing -20 to +50 deg C
Enclosure RatingIP66/NEMA 4X, 12, and 13
Fluid Temperature Range-40 to +100 deg C
Alarm and Event LoggingOn‑board alarm, limit indication, and event log
Temperature Accuracy±0.5 deg C
Wetted MaterialsProbe: 316 SS; Flow body: Carbon Steel; Screens: 316 Stainless Steel
Alarm SignalingNAMUR‑43 compatible 21.5 mA alarm output (configurable)
Process FluidsNatural Gas, Air
Analog OutputsTwo isolated 4 to 20 mA outputs (Flow, Ratio or Temperature)
Relay OutputsThree fail‑safe solid‑state relay drive outputs (Test, Alarm, Limit)
Analog InputsOne 4 to 20 mA input for external meter (ratio calculation)
Local Display4‑line x 20‑character LCD with membrane keypad
Flow Turndown50:1
Flow Accuracy<±2% additional installed error; ±2% of reading over 5%-100% of flow range (20:1 turndown) [calibration stand]
Product TypeSMARTLINK® METER Digital Self‑checking Thermal Mass Flow Meter
ModelsAir: 0800 SLM (8 in), 1200 SLM (12 in), 1600 SLM (16 in), 2000 SLM (20 in), 2400 SLM (24 in), 2800 SLM (28 in); Natural Gas: 0200 SLM (2 in), 0300 SLM (3 in), 0400 SLM (4 in), 0600 SLM (6 in)
Power Supply24 VDC standard; Optional 115/230 VAC (50/60 Hz)
ApplicationsCombustion air and gas flow measurement, air/fuel ratio monitoring, fuel usage tracking, emissions optimization

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/fuel-and-air-delivery/smartlink-smartfire/smartlink-meter

Last source check: 2026-11-02

SMARTLINK Meter · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry