Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Smartlink/Smartfire

SMARTLINK® CV Electronic Valves

SMARTLINK CV combines a directly coupled valve actuator with an interface to the process controller.

SMARTLINK CV combines a directly coupled valve actuator with an interface to the process controller. The flow characteristic can be customized on site for parallel positioning and repeatable metering. Continuous-duty construction, varied valve-body formats and weatherproof/hazardous-location options support different installations, with approval and material selection matched to the ordered assembly.

Features & Benefits

Material
Ball Valves: Carbon steel or stainless steel (special alloys available) Body|Butterfly Valves: Cast iron, carbon steel, brass, stainless steel Body
Ambient Temperature Range
-40 to +158 deg F (-40 to +70 deg C)
Valve Compatibility
Butterfly (SLCV), Ball (SLBV), Linkage Arm/Control Actuator (SL CA)
Position Accuracy
0.1 deg (measured on the valve actuator shaft)
Position Command
4 to 20 mA isolated input|4.8 V burden at 20 mA (Input)
Enclosure Rating
NEMA 1/IP20 (Control Interface and DIN rail); NEMA 4/IP66 (Valve actuator and factory‑wired enclosures)
Product Type
Direct‑coupled valve with integrated actuator and control interface. Intelligent electronic control valve assembly.
Valve Sizes
0.5 to 2 in (Ball Valve)|1 to 16 in (Butterfly Valve)
Travel Time
14 seconds (full open to close)
Duty Cycle
Continuous
Approvals
UL Listed, FM Approved (Non‑incendive Class I, Division 2), ATEX Approved, IECEx Approved, CE Marked, KC and CCC Certified
Hazardous Location approved
ATEX, IEC Ex and KC; Non-Incendive for Class I, Division 2; UL, FM, CE
  • On-site characterization adapts valve response to the control task.

Applications

  • Industrial flow control
  • Combustion parallel-positioning systems

Detailed capabilities

Actuator, valve and process interface

SMARTLINK CV includes the directly coupled actuator/valve and a separate interface to the controller, PLC or DCS. The flow characteristic is customized at site so response can suit the control task. Butterfly, ball or linkage arrangements address different metering duties, with continuous positioning and built-in feedback supporting parallel-position combustion systems.

Manufacturer reference ↗

Environmental options and upkeep

The source describes outdoor/weatherproof construction and several hazardous-location qualifications, which depend on the chosen actuator/assembly. Factory coupling and calibration improve repeatability while avoiding external linkage adjustment. The mechanism needs no periodic lubrication, reducing routine maintenance. Valve-body material and service compatibility remain selections within the assembly rather than a universal approval for any gas, liquid or hazardous area.

Manufacturer reference ↗

Features and benefits

  • On-site characterization adapts valve response to the control task.

Manufacturer reference ↗

Published application context

  • Industrial flow control
  • Combustion parallel-positioning systems

Manufacturer reference ↗

Technical facts in the product overview

  • Hazardous Location approved: ATEX, IEC Ex and KC; Non-Incendive for Class I, Division 2; UL, FM, CE

Manufacturer reference ↗

Specifications

Material Specifications

Material
Ball Valves: Carbon steel or stainless steel (special alloys available) Body; Butterfly Valves: Cast iron, carbon steel, brass, stainless steel Body

Environmental Conditions

Ambient Temperature Range
-40 to +158 deg F (-40 to +70 deg C)
Enclosure Rating
NEMA 1/IP20 (Control Interface and DIN rail); NEMA 4/IP66 (Valve actuator and factory‑wired enclosures)

Applications & Compatibility

Valve Compatibility
Butterfly (SLCV), Ball (SLBV), Linkage Arm/Control Actuator (SL CA)
Applications
Industrial combustion control systems; Boilers and burners; Low‑NOx and low‑CO burner systems; Precise control of gas, air, and liquid flows in manufacturing processes; Process heaters

Actuation, Valve & Motion Control Specifications

Position Accuracy
0.1 deg (measured on the valve actuator shaft)
Position Command
4 to 20 mA isolated input; 4.8 V burden at 20 mA (Input)
Travel Time
14 seconds (full open to close)

Overview

Product Type
Direct‑coupled valve with integrated actuator and control interface. Intelligent electronic control valve assembly.

Dimensions & Size Specifications

Valve Sizes
0.5 to 2 in (Ball Valve); 1 to 16 in (Butterfly Valve)

Processing & Performance Metrics

Duty Cycle
Continuous

Standards & Certifications

Approvals
UL Listed, FM Approved (Non‑incendive Class I, Division 2), ATEX Approved, IECEx Approved, CE Marked, KC and CCC Certified

Technical Specifications

Hazardous Location approved
ATEX, IEC Ex and KC; Non-Incendive for Class I, Division 2; UL, FM, CE
SMARTLINK® CV Electronic Valves — manufacturer page values
ParameterPublished value / configuration
MaterialBall Valves: Carbon steel or stainless steel (special alloys available) Body; Butterfly Valves: Cast iron, carbon steel, brass, stainless steel Body
Ambient Temperature Range-40 to +158 deg F (-40 to +70 deg C)
Enclosure RatingNEMA 1/IP20 (Control Interface and DIN rail); NEMA 4/IP66 (Valve actuator and factory‑wired enclosures)
Valve CompatibilityButterfly (SLCV), Ball (SLBV), Linkage Arm/Control Actuator (SL CA)
ApplicationsIndustrial combustion control systems; Boilers and burners; Low‑NOx and low‑CO burner systems; Precise control of gas, air, and liquid flows in manufacturing processes; Process heaters
Position Accuracy0.1 deg (measured on the valve actuator shaft)
Position Command4 to 20 mA isolated input; 4.8 V burden at 20 mA (Input)
Travel Time14 seconds (full open to close)
Product TypeDirect‑coupled valve with integrated actuator and control interface. Intelligent electronic control valve assembly.
Valve Sizes0.5 to 2 in (Ball Valve); 1 to 16 in (Butterfly Valve)
Duty CycleContinuous
ApprovalsUL Listed, FM Approved (Non‑incendive Class I, Division 2), ATEX Approved, IECEx Approved, CE Marked, KC and CCC Certified
Hazardous Location approvedATEX, IEC Ex and KC; Non-Incendive for Class I, Division 2; UL, FM, CE

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
0050SLAP.5" Smartlink CV Adjustable Port ValveRequest quotation
0050SLBV.5" SMARTLINK CV BALL VALVERequest quotation
0075SLAP.75" Smartlink CV Adjustable Port ValveRequest quotation
0075SLBV.75" SMARTLINK CV BALL VALVERequest quotation
0100SLAP1" Smartlink CV Adjustable Port ValveRequest quotation
0100SLBV1" SMARTLINK CV BALL VALVERequest quotation
0100SSLCV1" Smartlink CV Butterfly ValveRequest quotation
0125SLAP1.25" Smartlink CV Adjustable Port ValveRequest quotation
0125SLBV1.25" SMARTLINK CV BALL VALVERequest quotation
0125SSLCV1.25" Smartlink CV Butterfly ValveRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/fuel-and-air-delivery/smartlink-smartfire/smartlink-cv-electronic-valves

Last source check: 2026-11-02

Smartlink CV Product Image · Manufacturer ownership retained; republication licence not independently confirmed

Smartlink CV Product Image 1 · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry