Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Smartlink/Smartfire

SMARTFIRE® Intelligent Combustion Control System

SMARTFIRE coordinates measured air/fuel flow using cross-limited electronic ratio control for compatible industrial burners.

SMARTFIRE coordinates measured air/fuel flow using cross-limited electronic ratio control for compatible industrial burners. The turnkey system interfaces with a conventional burner-management system and pipe train, compensating for process changes. Diagnostics, optional logging and remote support extend visibility, while its enclosures, actuators and approvals retain the published system qualifications.

Features & Benefits

Ambient Temperature Range
-20 to 122 deg F (-29 to 50 deg C)
Valve Position Control
0.1 deg angular resolution
Air/Fuel Ratio Control
±2% over 20:1 turndown
Flow Controller Depth
3.25 in
Output Contacts
250 VAC at 10 A, 30 VDC at 10 A
Analog Outputs
4 to 20 mA, max load 350 Ω
Probe Lengths
10.75 in (Air), 6.75 in (Gas)
Analog Inputs
Input resistance 250 Ω, max 20 mA
Power Supply
100 to 120 VAC at 2.5 A max, 50 to 60 Hz|200 to 240 VAC at 1.5 A max, 50 to 60 Hz
Flow Control
±1% of reading over 20:1 turndown
Dimensions
Interface Panel - 12.88 in x 14.75 in x 4.25 in
Approvals
CSA and FM (CE pending)
  • Cross-limited flow control compensates for process and combustion changes.
  • Real-time diagnostics support troubleshooting.

Applications

  • Measured air/fuel ratio control with compatible industrial burners

Detailed capabilities

Measured flow rather than position alone

SMARTFIRE controls the air/fuel relationship using measured mass flows and full cross-limiting. It compensates for changing combustion and process conditions across the burner range rather than optimizing one fixed firing point. The turnkey components integrate with the conventional burner-management and pipe-train functions, retaining the distinction between ratio control and the surrounding safety sequence.

Manufacturer reference ↗

Diagnostics, monitoring and environment

The system provides live combustion/process information with optional logging and remote support. A gateway can connect the stated off-site service arrangement; it is not inherent to every installation. Industrial enclosures, high-torque actuators and digital field communication support demanding conditions. Redundant checking is described within the intelligent components, with FM/CSA and directive references applying to the published system configuration.

Manufacturer reference ↗

Features and benefits

  • Cross-limited flow control compensates for process and combustion changes.
  • Real-time diagnostics support troubleshooting.

Manufacturer reference ↗

Published application context

  • Measured air/fuel ratio control with compatible industrial burners

Manufacturer reference ↗

Specifications

Environmental Conditions

Ambient Temperature Range
-20 to 122 deg F (-29 to 50 deg C)

Actuation, Valve & Motion Control Specifications

Valve Position Control
0.1 deg angular resolution

Air & Combustion Air Specifications

Air/Fuel Ratio Control
±2% over 20:1 turndown

Mechanical & Hardware Characteristics

Flow Controller Depth
3.25 in

Inputs, Outputs & Signal Interfaces

Output Contacts
250 VAC at 10 A, 30 VDC at 10 A
Analog Outputs
4 to 20 mA, max load 350 Ω
Analog Inputs
Input resistance 250 Ω, max 20 mA

Electrical Specifications

Power Supply
100 to 120 VAC at 2.5 A max, 50 to 60 Hz; 200 to 240 VAC at 1.5 A max, 50 to 60 Hz

Performance, Flow & Capacity

Flow Control
±1% of reading over 20:1 turndown

Dimensions & Weight

Dimensions
Interface Panel - 12.88 in x 14.75 in x 4.25 in

Standards & Certifications

Approvals
CSA and FM (CE pending)

Others

Probe Lengths
10.75 in (Air), 6.75 in (Gas)
SMARTFIRE® Intelligent Combustion Control System — manufacturer page values
ParameterPublished value / configuration
Ambient Temperature Range-20 to 122 deg F (-29 to 50 deg C)
Valve Position Control0.1 deg angular resolution
Air/Fuel Ratio Control±2% over 20:1 turndown
Flow Controller Depth3.25 in
Output Contacts250 VAC at 10 A, 30 VDC at 10 A
Analog Outputs4 to 20 mA, max load 350 Ω
Analog InputsInput resistance 250 Ω, max 20 mA
Power Supply100 to 120 VAC at 2.5 A max, 50 to 60 Hz; 200 to 240 VAC at 1.5 A max, 50 to 60 Hz
Flow Control±1% of reading over 20:1 turndown
DimensionsInterface Panel - 12.88 in x 14.75 in x 4.25 in
ApprovalsCSA and FM (CE pending)
Probe Lengths10.75 in (Air), 6.75 in (Gas)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
10356863" SS FLOW BDYRequest quotation
10356874" SS FLOW BDYRequest quotation
10356886" SS FLOW BDYRequest quotation
103574216" FLOW BDY EXT FLGDRequest quotation
103574420" FLOW BDY EXT FLGDRequest quotation
103574620" FLOW BDY FLGDRequest quotation
10359141"-A BR SMARTFIRE VLVRequest quotation
10359151.25"-A BR SMARTFIRE VLVRequest quotation
10359161.5"-A BR SMARTFIRE VLVRequest quotation
10359172"-A BR SMARTFIRE VLV ASYRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/fuel-and-air-delivery/smartlink-smartfire/smartfire-intelligent-combustion-control-system

Last source check: 2026-11-02

SMARTFIRE® Intelligent Combustion Control System Product Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry