Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

High Pressure Regulators up to ANSI 600

HON 530-E

HON 530-E electrically controls gas flow or pressure using a pressure-balanced sleeve.

HON 530-E electrically controls gas flow or pressure using a pressure-balanced sleeve. Standard noise reduction and tight closure support the control duty, with integrated safety shut-off available in specified sizes. Electronic control accessories adapt the valve to pressure, flow or other customer-defined regulating tasks, subject to the selected size and assembly.

Models: HON 530-E

Features & Benefits

Maximum admissible pressure
100 bar
Valve sleeve
Pressure compensated
Closure
Bubble-tight
  • Combines electric control with available shut-off protection

Applications

  • Gas pressure and flow control

Detailed capabilities

HON 530-E — operating design

HON 530-E electrically controls gas flow or pressure using a pressure-balanced sleeve. Standard noise reduction and tight closure support the control duty, with integrated safety shut-off available in specified sizes. Electronic control accessories adapt the valve to pressure, flow or other customer-defined regulating tasks, subject to the selected size and assembly.

Manufacturer reference ↗

Control sleeve, shut-off and accessories

The pressure-compensated sleeve provides electric flow or pressure control and tight closure. Safety shut-off is specified for particular size pairs with alternative actuator systems, rather than every possible body. Published electronic-control accessories support the desired regulating task. Noise reduction is standard, while flange classes and pressure-trip ranges remain configuration-dependent.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 530-E. Version, size and option qualifications remain attached to each fact.

  • Maximum Inlet Pressure Rating: 100 bar (DN 250/250 and DN 300/300, 250 bar)
  • Connection Type: Flanged to ANSI 600 RF, ANSI 900 RJ (DN 250/250 and DN 300/300: ANSI 1500 RJ, ANSI 900 RJ)
  • Explosion Protection: E Ex edib II CT4
  • Position Indicator: Potentiometer 5 kΩ or 0/4 to 20 mA signal
  • Actuator Voltage: 230V, 50 Hz or 400V, 50 Hz (DN 200 and Larger: only 400V, 50 Hz) voltage alternating current
  • Power Supply: 0.5 to 1.5 kW (depending on size)
  • Adjusting Time: 68 to 620 s (depending on task)

Manufacturer reference ↗

Specifications

Technical Specifications

Maximum Inlet Pressure Rating
100 bar (DN 250/250 and DN 300/300, 250 bar)
Connection Type
Flanged to ANSI 600 RF, ANSI 900 RJ (DN 250/250 and DN 300/300: ANSI 1500 RJ, ANSI 900 RJ)

Standards & Certifications

Explosion Protection
E Ex edib II CT4

Function Display

Position Indicator
Potentiometer 5 kΩ or 0/4 to 20 mA signal

Electrical Specifications

Actuator Voltage
230V, 50 Hz or 400V, 50 Hz (DN 200 and Larger: only 400V, 50 Hz) voltage alternating current
Power Supply
0.5 to 1.5 kW (depending on size)

I/O Capabilities

Adjusting Time
68 to 620 s (depending on task)

Applications & Compatibility

Applications
Flow and pressure control for natural gas and all non-corrosive gases

Environmental Conditions

Valve Type
Electrically-Driven Main Valve
HON 530-E — manufacturer page values
ParameterPublished value / configuration
Maximum Inlet Pressure Rating100 bar (DN 250/250 and DN 300/300, 250 bar)
Connection TypeFlanged to ANSI 600 RF, ANSI 900 RJ (DN 250/250 and DN 300/300: ANSI 1500 RJ, ANSI 900 RJ)
Explosion ProtectionE Ex edib II CT4
Position IndicatorPotentiometer 5 kΩ or 0/4 to 20 mA signal
Actuator Voltage230V, 50 Hz or 400V, 50 Hz (DN 200 and Larger: only 400V, 50 Hz) voltage alternating current
Power Supply0.5 to 1.5 kW (depending on size)
Adjusting Time68 to 620 s (depending on task)
ApplicationsFlow and pressure control for natural gas and all non-corrosive gases
Valve TypeElectrically-Driven Main Valve

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON530-E-SPFlow Control Valve HON 530 E-SPRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/high-pressure-regulators-up-to-ansi-600/hon-530-e

Last source check: 2026-11-02

HON 530-E Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry