Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

High Pressure Regulators up to ANSI 600

HON 530-E-WG

HON 530-E-WG is an electrically operated gas control valve with axial flow and a fully pressure-balanced sleeve.

HON 530-E-WG is an electrically operated gas control valve with axial flow and a fully pressure-balanced sleeve. A frequency converter sets operating speed to suit the duty. The valve retains its last position after a power failure, while standard noise reduction and tight shut-off support controlled operation in the selected pressure-class configuration.

Models: HON 530-E-WG

Features & Benefits

Power failure response
Retains last position
Maximum admissible pressure
100 bar
Connections
ANSI class 600 or 900
  • Axial flow supports high flow capacity

Applications

  • Gas flow and pressure regulation

Specifications

Processing & Performance Metrics

Maximum Admissible Pressure
Up to 105 bar

Environmental Conditions

Maximum Operating Pressure
Up to 105 bar kilopascal
Temperature Range
-20 to +60 deg C

Electrical Specifications

Drive Power Consumption
0.56 kW
Drive Power Supply
400 V, 3-phase AC, 50 Hz (other frequencies on request)
Control Type
3-Step Control (ccw/OFF/cw); Frequency-dependent speeds possible

Standards & Certifications

Explosion Protection
Electronic accessories: ATEX compliant; Mechanical components: No ignition sources/hot faces (not subject to ATEX 95)

Technical Specifications

Connection Type
Flange Class 600 acc. to ANSI 16.5

Material Specifications

Body Material
Cast Steel

Applications & Compatibility

Applications
Bi-directional operation; Feeding/withdrawing gas from storage facilities and mains; Flow-rate/gas-pressure control; Suitable for gases per DVGW G 260 and neutral, non-aggressive gases (others on request)
HON 530-E-WG — manufacturer page values
ParameterPublished value / configuration
Maximum Admissible PressureUp to 105 bar
Maximum Operating PressureUp to 105 bar kilopascal
Temperature Range-20 to +60 deg C
Drive Power Consumption0.56 kW
Drive Power Supply400 V, 3-phase AC, 50 Hz (other frequencies on request)
Control Type3-Step Control (ccw/OFF/cw); Frequency-dependent speeds possible
Explosion ProtectionElectronic accessories: ATEX compliant; Mechanical components: No ignition sources/hot faces (not subject to ATEX 95)
Connection TypeFlange Class 600 acc. to ANSI 16.5
Body MaterialCast Steel
ApplicationsBi-directional operation; Feeding/withdrawing gas from storage facilities and mains; Flow-rate/gas-pressure control; Suitable for gases per DVGW G 260 and neutral, non-aggressive gases (others on request)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type
NameLast checkedType

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON530E-WGFLOW CONTROL VALVE HON 530 E-WGRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/high-pressure-regulators-up-to-ansi-600/hon-530-e-wg

Last source check: 2026-11-02

HON 530-E WG Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry