High Pressure Regulators up to ANSI 600
HON 502
HON 502 is a pilot-operated regulator for gas transfer stations and industrial supplies.
HON 502 is a pilot-operated regulator for gas transfer stations and industrial supplies. Its design combines a broad inlet range with a reduced parts count and noise-control features. The outlet is larger than the inlet on the published arrangement, and optional metal foam provides further attenuation beyond the standard grid plate.
Models: HON 502
Features & Benefits
- Pilots
- HON 630 series and optional HON 630-1
- Noise control
- Grid plate, optional metal foam
- Reduced parts count aids maintenance
Applications
- Gas transport transfer stations, power plants and industrial facilities
Detailed capabilities
HON 502 — operating design
HON 502 is a pilot-operated regulator for gas transfer stations and industrial supplies. Its design combines a broad inlet range with a reduced parts count and noise-control features. The outlet is larger than the inlet on the published arrangement, and optional metal foam provides further attenuation beyond the standard grid plate.
Pilot and noise-control options
The normal pilot choice is the HON 630 series. A single-stage HON 630-1 is listed for inlet variation below fifteen bar. The larger outlet and noise grid address gas expansion, with metal foam available for further attenuation. Several flanges and inlet/outlet size pairs are published, so the selected construction establishes the pressure and connection envelope.
Published configuration and technical facts
The manufacturer lists these values for HON 502. Version, size and option qualifications remain attached to each fact.
- Minimum Differential Pressure: 2 bar
- Maximum Inlet Pressure Rating: 100 bar
- Connection Type: Flanged to DIN PN 40 and ANSI 300/600
- Maximum Differential Pressure: 70 bar pounds per square inch
- Operating Temperature Range: -20 to +60 deg C
- Outlet Pressure Range: 0.3 to 40 bar (Diaphragm Assembly); 20 to 90 bar (Metal Harmonica Type Measuring Unit)
- Lock-up Pressure Zone Class: SZ 2.5
Technical Specifications
- Minimum Differential Pressure
- 2 bar
- Maximum Inlet Pressure Rating
- 100 bar
- Connection Type
- Flanged to DIN PN 40 and ANSI 300/600
- Suitable Media
- Natural gas and all non-corrosive gaseous media
Processing & Performance Metrics
- Maximum Differential Pressure
- 70 bar pounds per square inch
Environmental Conditions
- Operating Temperature Range
- -20 to +60 deg C
- Outlet Pressure Range
- 0.3 to 40 bar (Diaphragm Assembly); 20 to 90 bar (Metal Harmonica Type Measuring Unit)
Mechanical & Physical Properties
- Lock-up Pressure Zone Class
- SZ 2.5
Standards & Certifications
- Explosion Protection
- All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements.
- Approvals
- CE Mark with PED
Material Specifications
- Body Material
- Cast Steel
Applications & Compatibility
- Applications
- Offtake stations in gas transmission systems, gas supply to industrial and power plants
| Parameter | Published value / configuration |
|---|---|
| Minimum Differential Pressure | 2 bar |
| Maximum Inlet Pressure Rating | 100 bar |
| Connection Type | Flanged to DIN PN 40 and ANSI 300/600 |
| Suitable Media | Natural gas and all non-corrosive gaseous media |
| Maximum Differential Pressure | 70 bar pounds per square inch |
| Operating Temperature Range | -20 to +60 deg C |
| Outlet Pressure Range | 0.3 to 40 bar (Diaphragm Assembly); 20 to 90 bar (Metal Harmonica Type Measuring Unit) |
| Lock-up Pressure Zone Class | SZ 2.5 |
| Explosion Protection | All mechanical components of this device are without potential ignition sources and/or hot faces. They are not subject to ATEX 95 (94/9/EC). All electronic accessories, on the other hand, meet ATEX requirements. |
| Approvals | CE Mark with PED |
| Body Material | Cast Steel |
| Applications | Offtake stations in gas transmission systems, gas supply to industrial and power plants |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
1 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HON502 | Gas pressure Regulator HON 502 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 502 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
