Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Gas Filters, Valves & Components

HON 925

HON 925 protects connected gas measuring equipment from overpressure.

HON 925 protects connected gas measuring equipment from overpressure. The compact device is offered with fixed response settings and an additional connection for a pilot's measuring or impulse line. Different inlet and gauge connections are published, allowing the selected version to match the instrument piping without treating all settings as interchangeable.

Models: HON 925

Features & Benefits

Maximum admissible pressure
100 bar
Response settings
Fixed values from 0.6 to 40 bar listed, others on enquiry
  • Compact protection arrangement

Applications

  • Gas pressure measurement and pilot impulse lines

Detailed capabilities

HON 925 — operating design

HON 925 protects connected gas measuring equipment from overpressure. The compact device is offered with fixed response settings and an additional connection for a pilot's measuring or impulse line. Different inlet and gauge connections are published, allowing the selected version to match the instrument piping without treating all settings as interchangeable.

Manufacturer reference ↗

Fixed trip settings and instrument connections

HON 925 is supplied with selected fixed response pressures, from the manufacturer’s listed low setting through the higher ranges. An extra impulse connection supports the pilot measurement line. Inlet tubing options and the gauge-side connection differ, so the protector must be matched to both the chosen trip pressure and the connected measuring equipment.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 925. Version, size and option qualifications remain attached to each fact.

  • Maximum Admissible Pressure: 100 bar
  • Maximum Operating Pressure: up to 100 bar kilopascal

Manufacturer reference ↗

Specifications

Processing & Performance Metrics

Maximum Admissible Pressure
100 bar

Environmental Conditions

Maximum Operating Pressure
up to 100 bar kilopascal

Standards & Certifications

Explosion Protection
All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.
Approvals
DVGW Registration, SEP Design According to PED

Technical Specifications

Connection Type
Inlet: Pipe Connection DIN EN ISO 8434-1 (DIN 2353) for Pipe Sizes 10 mm, 12 mm; Outlet: Gauge Connection According to DIN EN ISO 228 G 1/4 - or similar to pipe connection

Applications & Compatibility

Applications
Suitable for non-aggressive gases, other gases on enquiry
HON 925 — manufacturer page values
ParameterPublished value / configuration
Maximum Admissible Pressure100 bar
Maximum Operating Pressureup to 100 bar kilopascal
Explosion ProtectionAll mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.
ApprovalsDVGW Registration, SEP Design According to PED
Connection TypeInlet: Pipe Connection DIN EN ISO 8434-1 (DIN 2353) for Pipe Sizes 10 mm, 12 mm; Outlet: Gauge Connection According to DIN EN ISO 228 G 1/4 - or similar to pipe connection
ApplicationsSuitable for non-aggressive gases, other gases on enquiry

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

2 parts

Part NumberDescriptionEnquiry
HON925Overpressure shut off valve HON 925Request quotation
RMG925Overpressure shut off valve RMG 925Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/gas-filters-valves-and-components/hon-925

Last source check: 2026-11-02

HON 925 Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry