Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Gas Filters, Valves & Components

HON 911a

HON 911a is a push-button gas valve intended for test and measurement lines, with an open service position.

HON 911a is a push-button gas valve intended for test and measurement lines, with an open service position. Its published arrangement includes a three-way ball valve and test couplings. The negative-lap design avoids a fully closed condition during switching, and component selection follows the specified tubing and regulator assembly.

Models: HON 911a

Features & Benefits

Service position
Open
Valve seat
14 mm
Maximum admissible pressure
100 bar
  • Switching arrangement avoids complete closure during actuation

Applications

  • Gas test and measuring lines

Detailed capabilities

HON 911a — operating design

HON 911a is a push-button gas valve intended for test and measurement lines, with an open service position. Its published arrangement includes a three-way ball valve and test couplings. The negative-lap design avoids a fully closed condition during switching, and component selection follows the specified tubing and regulator assembly.

Manufacturer reference ↗

Test connections and switching behavior

The source lists two high-pressure test couplings and a three-way ball valve with negative lap. This avoids a fully closed switching position. The device is presented for test and measuring lines, with an open service position, and its stated tubing size, seat and pressure limits must remain associated with this specific 911a version rather than the normally closed 910a.

Manufacturer reference ↗

Published configuration and technical facts

The manufacturer lists these values for HON 911a. Version, size and option qualifications remain attached to each fact.

  • Maximum Admissible Pressure: 100 bar
  • Maximum Operating Pressure: 100 bar kilopascal
  • Valve Seat Diameter: 14 mm
  • Connection Type: Pipe Connections according to DIN EN ISO 8434-1 (DIN 2353) for pipe sizes 12 mm
  • Approvals: CE Mark with PED, DIN EN 334/14382, SEP Design According to PED

Manufacturer reference ↗

Specifications

Processing & Performance Metrics

Maximum Admissible Pressure
100 bar

Environmental Conditions

Maximum Operating Pressure
100 bar kilopascal

Mechanical & Physical Properties

Valve Seat Diameter
14 mm

Technical Specifications

Connection Type
Pipe Connections according to DIN EN ISO 8434-1 (DIN 2353) for pipe sizes 12 mm

Applications & Compatibility

Applications
Test valve for safety shut-off valves. Suitable for non-aggressive gases, other gases on enquiry

Standards & Certifications

Approvals
CE Mark with PED, DIN EN 334/14382, SEP Design According to PED
HON 911a — manufacturer page values
ParameterPublished value / configuration
Maximum Admissible Pressure100 bar
Maximum Operating Pressure100 bar kilopascal
Valve Seat Diameter14 mm
Connection TypePipe Connections according to DIN EN ISO 8434-1 (DIN 2353) for pipe sizes 12 mm
ApplicationsTest valve for safety shut-off valves. Suitable for non-aggressive gases, other gases on enquiry
ApprovalsCE Mark with PED, DIN EN 334/14382, SEP Design According to PED

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
HON911Push Button Valve HON 911aRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/gas/regulators-and-safety-accessories/gas-filters-valves-and-components/hon-911a

Last source check: 2026-11-02

HON 911a Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry