Gas Filters, Valves & Components
HON 906 and 906a
HON 906 and HON 906a remove dust, rust and other solids ahead of gas regulation and metering equipment.
HON 906 and HON 906a remove dust, rust and other solids ahead of gas regulation and metering equipment. Their replaceable pleated-paper inserts are offered in several filtration grades. HON 906a adds two-stage dust separation and an optional magnetic insert, while pressure and connection selections vary between versions.
Models: HON 906 and 906a
Features & Benefits
- Filter grades
- 10, 4 or 2 μm
- HON 906 maximum admissible pressure
- 16 bar
- HON 906a maximum admissible pressure
- 25 bar
- Low pressure loss and replaceable filtration inserts
Applications
- Distribution stations, power plants and industrial facilities
Detailed capabilities
HON 906 and 906a — operating design
HON 906 and HON 906a remove dust, rust and other solids ahead of gas regulation and metering equipment. Their replaceable pleated-paper inserts are offered in several filtration grades. HON 906a adds two-stage dust separation and an optional magnetic insert, while pressure and connection selections vary between versions.
HON 906 compared with HON 906a
The basic HON 906 uses replaceable pleated-paper filtration in several grades and sizes. HON 906a adds two-stage dust separation and an optional magnetic insert; the t version is identified for increased thermal resilience. Their permissible pressures differ, while body material and flange size also depend on the selected diameter. Cleaning and disposal are therefore tied to the appropriate insert, not one common cartridge across the range.
Published configuration and technical facts
The manufacturer lists these values for HON 906 and 906a. Version, size and option qualifications remain attached to each fact.
- Maximum Permissible Pressure: HON 906: 16 bar, HON 906a: 25 bar
- Maximum Flow Velocity: 20 m/s
- Soiled Filter Insert Limit: 500 mbar
- Connection Type: ANSI Flanges Class 150 RF; EN Flanges PN 16, PN 25
- Filtration Efficiency: 0.99
- Temperature Range: -20 to +60 deg C
- Approvals: DIN 3386, DVGW G 498, DIN 30690-1, CE Marked PED 0085, ATEX 95 (94/9/EC)
- Body Material: Cast Aluminum Alloy (HON 906 DN 25-100, HON 907 all DN), Ductile Iron (HON 906 DN 150, HON 906a)
- Nominal Widths: DN 25 to 150
Processing & Performance Metrics
- Maximum Permissible Pressure
- HON 906: 16 bar, HON 906a: 25 bar
- Maximum Flow Velocity
- 20 m/s
Technical Specifications
- Soiled Filter Insert Limit
- 500 mbar
- Connection Type
- ANSI Flanges Class 150 RF; EN Flanges PN 16, PN 25
Environmental Conditions
- Filtration Efficiency
- 0.99
- Temperature Range
- -20 to +60 deg C
Standards & Certifications
- Explosion Protection
- All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.
- Approvals
- DIN 3386, DVGW G 498, DIN 30690-1, CE Marked PED 0085, ATEX 95 (94/9/EC)
Material Specifications
- Filter Material
- Pleated Special Paper
- Body Material
- Cast Aluminum Alloy (HON 906 DN 25-100, HON 907 all DN), Ductile Iron (HON 906 DN 150, HON 906a)
Electrical Specifications
- Nominal Widths
- DN 25 to 150
Applications & Compatibility
- Applications
- Gas filter for commercial and industrial gas systems; Gases per DVGW G 260; Neutral, non-aggressive gases
| Parameter | Published value / configuration |
|---|---|
| Maximum Permissible Pressure | HON 906: 16 bar, HON 906a: 25 bar |
| Maximum Flow Velocity | 20 m/s |
| Soiled Filter Insert Limit | 500 mbar |
| Connection Type | ANSI Flanges Class 150 RF; EN Flanges PN 16, PN 25 |
| Filtration Efficiency | 0.99 |
| Temperature Range | -20 to +60 deg C |
| Explosion Protection | All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements. |
| Approvals | DIN 3386, DVGW G 498, DIN 30690-1, CE Marked PED 0085, ATEX 95 (94/9/EC) |
| Filter Material | Pleated Special Paper |
| Body Material | Cast Aluminum Alloy (HON 906 DN 25-100, HON 907 all DN), Ductile Iron (HON 906 DN 150, HON 906a) |
| Nominal Widths | DN 25 to 150 |
| Applications | Gas filter for commercial and industrial gas systems; Gases per DVGW G 260; Neutral, non-aggressive gases |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
3 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HON906 | Gas Filter HON 906 | Request quotation |
| HON906A | Gas Filter HON 906a | Request quotation |
| HON906_PA | Gas Filter HON 906 Pre-assembly | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 906 and 906a Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
