Gas Filters, Valves & Components
HON 905
HON 905 is a fine-mesh auxiliary gas filter, including for pneumatic pilot supplies.
HON 905 is a fine-mesh auxiliary gas filter, including for pneumatic pilot supplies. A large filtering area and replaceable insert combine filtration with low flow resistance. The unit may be used alone or in parallel filter blocks, with the published connection and pressure version selected to suit the regulating assembly.
Models: HON 905
Features & Benefits
- Filtration grade
- Approximately 5 μm
- Maximum operating flow
- 15 m³/h
- Arrangement
- Single or parallel filter blocks
- Replaceable insert simplifies maintenance
Applications
- Pneumatic pilot gas filtration
Detailed capabilities
HON 905 — operating design
HON 905 is a fine-mesh auxiliary gas filter, including for pneumatic pilot supplies. A large filtering area and replaceable insert combine filtration with low flow resistance. The unit may be used alone or in parallel filter blocks, with the published connection and pressure version selected to suit the regulating assembly.
Filter arrangement and service limits
HON 905 can operate as a single auxiliary filter or in parallel blocks. Its fine insert can be changed for maintenance, and the source gives different pressure-drop references for clean and soiled conditions. The PN100 tubing connection and published flow coefficient belong to the selected filter arrangement, with the parent regulator combination relevant to its conformity discussion.
Published configuration and technical facts
The manufacturer lists these values for HON 905. Version, size and option qualifications remain attached to each fact.
- Maximum Operating Flow Rate Qmmax: 15 m³/h
- Maximum Admissible Pressure: 100 (250) bar
- Flow Rate Coefficient (KG): 41 m³/(h ⋅ bar)
- Soiled Filter Insert Limit: 1 bar approx. (Δpmax)
- Connection Type: Pipe Connections according to DIN EN ISO 8434-1 (DIN 2353), PN 100, for pipe diameter 10 mm
- Maximum Operating Pressure: Up to 100 (250) bar kilopascal
- Grade of Filtration: 5 microns
- New Filter Insert: 0.1 bar
Processing & Performance Metrics
- Maximum Operating Flow Rate Qmmax
- 15 m³/h
- Maximum Admissible Pressure
- 100 (250) bar
- Flow Rate Coefficient (KG)
- 41 m³/(h ⋅ bar)
Technical Specifications
- Soiled Filter Insert Limit
- 1 bar approx. (Δpmax)
- Connection Type
- Pipe Connections according to DIN EN ISO 8434-1 (DIN 2353), PN 100, for pipe diameter 10 mm
Environmental Conditions
- Maximum Operating Pressure
- Up to 100 (250) bar kilopascal
Standards & Certifications
- Explosion Protection
- All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.
Communication & Protocols
- Grade of Filtration
- 5 microns
Mechanical & Physical Properties
- New Filter Insert
- 0.1 bar
Applications & Compatibility
- Applications
- Gas filter for pilot operated gas pressure regulators.
| Parameter | Published value / configuration |
|---|---|
| Maximum Operating Flow Rate Qmmax | 15 m³/h |
| Maximum Admissible Pressure | 100 (250) bar |
| Flow Rate Coefficient (KG) | 41 m³/(h ⋅ bar) |
| Soiled Filter Insert Limit | 1 bar approx. (Δpmax) |
| Connection Type | Pipe Connections according to DIN EN ISO 8434-1 (DIN 2353), PN 100, for pipe diameter 10 mm |
| Maximum Operating Pressure | Up to 100 (250) bar kilopascal |
| Explosion Protection | All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements. |
| Grade of Filtration | 5 microns |
| New Filter Insert | 0.1 bar |
| Applications | Gas filter for pilot operated gas pressure regulators. |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
2 parts
| Part Number | Description | Enquiry |
|---|---|---|
| HON905 | Fine Filter HON 905 | Request quotation |
| RMG905 | Fine Filter RMG 905 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
HON 905 Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
