Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

OneWireless Network

Process Control Access Point

Process Control Access Point combines ISA100 Wireless, WirelessHART, Wi-Fi and Ethernet connectivity in a OneWireless access device.

Process Control Access Point combines ISA100 Wireless, WirelessHART, Wi-Fi and Ethernet connectivity in a OneWireless access device. Backhaul choices include Ethernet, fiber and supported SFP arrangements. Bringing sensor and Wi-Fi communication into one package reduces separate equipment, power and network connections, particularly useful where installation work in hazardous areas is costly.

Models: PCAP3A, PCAP3D

Features & Benefits

Connections
ISA100 Wireless, WirelessHART, Wi-Fi and Ethernet
Backhaul
Ethernet, fiber and SFP options
  • Reduces duplicate power and network connections

Applications

  • Industrial multiprotocol wireless networks

Specifications

Dimensions & Weight

Dimensions
11.4 x 11.1 x 6.8 in; 290 x 281 x 173 mm
Weight
17.1/17.7 lb; 7.76/8.02 kg

Others

Ports
1X PoE+ In; 1X RJ-45 Console Port; 1X Shielded Power Cable; 2X External Antenna Ports (ISA100/WirelessHART); 2X Grounding Cables; 2X PoE Out; 4X External Antenna Ports (Wi-Fi)
Number of Supported Enraf FlexLine Radar Gauges/WFI
13 Enraf FlexLine/WFI
Field Expandable Wireless I/O (FEWIO)
3 Modbus Slaves per FEWIO; 50 FEWIOs per WDM
RF Receive Sensitivity
-100 dBm @ 250 kbps
Operating Temperature
-40 to +70 deg C
Corrosion Resistance
G3
Quality of Service
Supported
Ingress Protection
IP66/IP67
Field Protocols
ISA100 Wireless (IEC 62734); Wi-Fi 802.11b/g/n/ac Wave2; WirelessHART (IEC 62591)
Transmit Power
Max 18 dBm
Frequency Band
2.4 to 2.483 GHz (ISM Band)
Authentication
Over-The-Air and BLE-Based Key Distribution
Network Hops
4 hops
Encryption
AES 128-bit
Standards
CE; CSA: Class I, Division 2, Group A,B,C,D; ETSI; FCC; IC; IEC61326-1; Radio Approval; T4 Environment Hazardous, Class 1, Div 2/Zone 2 Hazardous Location
Data Rate
BLE: 1 Mbps (FHSS/FSK); ISA100: 250 Kbps (DSSS/O-QPSK); Wired: 10/100 Mbps
Humidity
0 to 95% RH, Non-Condensing
Series
OneWireless™
Models
PCAP3A (AC); PCAP3D (DC)
Shock
15G Non-Operational; 4G–5G Operational
Power
PCAP3A: 100 to 240 VAC, 1.3A Watt; PCAP3D: 10.8 to 36 VDC, 5.9A Watt
Process Control Access Point — manufacturer page values
ParameterPublished value / configuration
Dimensions11.4 x 11.1 x 6.8 in; 290 x 281 x 173 mm
Weight17.1/17.7 lb; 7.76/8.02 kg
Ports1X PoE+ In; 1X RJ-45 Console Port; 1X Shielded Power Cable; 2X External Antenna Ports (ISA100/WirelessHART); 2X Grounding Cables; 2X PoE Out; 4X External Antenna Ports (Wi-Fi)
Number of Supported Enraf FlexLine Radar Gauges/WFI13 Enraf FlexLine/WFI
Field Expandable Wireless I/O (FEWIO)3 Modbus Slaves per FEWIO; 50 FEWIOs per WDM
RF Receive Sensitivity-100 dBm @ 250 kbps
Operating Temperature-40 to +70 deg C
Corrosion ResistanceG3
Quality of ServiceSupported
Ingress ProtectionIP66/IP67
Field ProtocolsISA100 Wireless (IEC 62734); Wi-Fi 802.11b/g/n/ac Wave2; WirelessHART (IEC 62591)
Transmit PowerMax 18 dBm
Frequency Band2.4 to 2.483 GHz (ISM Band)
AuthenticationOver-The-Air and BLE-Based Key Distribution
Network Hops4 hops
EncryptionAES 128-bit
StandardsCE; CSA: Class I, Division 2, Group A,B,C,D; ETSI; FCC; IC; IEC61326-1; Radio Approval; T4 Environment Hazardous, Class 1, Div 2/Zone 2 Hazardous Location
Data RateBLE: 1 Mbps (FHSS/FSK); ISA100: 250 Kbps (DSSS/O-QPSK); Wired: 10/100 Mbps
Humidity0 to 95% RH, Non-Condensing
SeriesOneWireless™
ModelsPCAP3A (AC); PCAP3D (DC)
Shock15G Non-Operational; 4G–5G Operational
PowerPCAP3A: 100 to 240 VAC, 1.3A Watt; PCAP3D: 10.8 to 36 VDC, 5.9A Watt

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Manufacturer sources

https://process.honeywell.com/us/en/products/wireless/onewireless-network/process-control-access-point

Last source check: 2026-11-02

Process Control Access Point Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry