Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

OneWireless Network

Field Device Access Point

FDAP connects ISA100 Wireless and WirelessHART field instruments through an industrial mesh access point.

FDAP connects ISA100 Wireless and WirelessHART field instruments through an industrial mesh access point. It discovers neighboring devices and uses antenna diversity to improve communication in difficult indoor or outdoor radio conditions. The published design supports hazardous-area monitoring and suitable open-loop control, extending the wireless instrument network without limiting the installation to one field-device protocol.

Models: FDAP32

Features & Benefits

Protocols
ISA100 Wireless and WirelessHART
Radio
IEEE 802.15.4 mesh
  • Supports communication in difficult multipath environments

Applications

  • Industrial wireless instrumentation
  • Critical monitoring and open-loop control

Specifications

Dimensions & Weight

Weight
2 kg; 4.6 lb
Dimensions
11.4 x 11.1 x 6.8 in; 290 x 281 x 173 mm

Others

Authentication
Over-the-air and BLE-Based; WirelessHART: HART modem only
Transmit Power
Max 18 dBm
Standards
CE; CSA: Class I, Division 2, Group A,B,C,D; ETSI; FCC; IC; IEC61326-1; Radio Approval; T4 Environment Hazardous, Class 1, Div 2/Zone 2 Hazardous Location
Shock
15G Non-Operational; 4G–5G Operational
Series
OneWireless™
Receiver Sensitivity
-100 dBm @ 250 Kbps
Quality of Service
Supported
Power
18 to 30 VDC at 2 W Watt; Power over Ethernet (PoE) at 5 W Watt
Ports
1X 10/100 Mbps Ethernet Port (Auto-Negotiation); 1X Grounding Cable; 2X External Antenna Ports (2.4 GHz)
Operating Temperature
-40 to +70 deg C (IECEx, ATEX, CSA)
Number of Supported Enraf FlexLine Radar Gauges/WFI
40 Enraf FlexLine/WFI
Network Hops
4 hops
Models
FDAP32
Ingress Protection
IP66/IP67
Humidity
0 to 95% RH, Non-Condensing
Frequency Band
2.4 to 2.483 GHz (ISM Band)
Field Protocols
ISA100 Wireless (IEC 62734); WirelessHART (IEC 62591)
Encryption
AES 128-bit
Data Rate
BLE: 1 Mbps (FHSS/FSK); ISA100: 250 Kbps (DSSS/O-QPSK); Wired: 10/100 Mbps
Corrosion Resistance
G3 per ANSI/ISA-S71.04-1985
Field Device Access Point — manufacturer page values
ParameterPublished value / configuration
Weight2 kg; 4.6 lb
Dimensions11.4 x 11.1 x 6.8 in; 290 x 281 x 173 mm
AuthenticationOver-the-air and BLE-Based; WirelessHART: HART modem only
Transmit PowerMax 18 dBm
StandardsCE; CSA: Class I, Division 2, Group A,B,C,D; ETSI; FCC; IC; IEC61326-1; Radio Approval; T4 Environment Hazardous, Class 1, Div 2/Zone 2 Hazardous Location
Shock15G Non-Operational; 4G–5G Operational
SeriesOneWireless™
Receiver Sensitivity-100 dBm @ 250 Kbps
Quality of ServiceSupported
Power18 to 30 VDC at 2 W Watt; Power over Ethernet (PoE) at 5 W Watt
Ports1X 10/100 Mbps Ethernet Port (Auto-Negotiation); 1X Grounding Cable; 2X External Antenna Ports (2.4 GHz)
Operating Temperature-40 to +70 deg C (IECEx, ATEX, CSA)
Number of Supported Enraf FlexLine Radar Gauges/WFI40 Enraf FlexLine/WFI
Network Hops4 hops
ModelsFDAP32
Ingress ProtectionIP66/IP67
Humidity0 to 95% RH, Non-Condensing
Frequency Band2.4 to 2.483 GHz (ISM Band)
Field ProtocolsISA100 Wireless (IEC 62734); WirelessHART (IEC 62591)
EncryptionAES 128-bit
Data RateBLE: 1 Mbps (FHSS/FSK); ISA100: 250 Kbps (DSSS/O-QPSK); Wired: 10/100 Mbps
Corrosion ResistanceG3 per ANSI/ISA-S71.04-1985

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

5 parts

Part NumberDescriptionEnquiry
51121705-501KIT, LIGHTNING SURGE ARRESTORRequest quotation
51156767-501KIT, PIPE MOUNTING BRACKET, FDAP GEN3Request quotation
51156767-502KIT, WALL MOUNTING BRACKET, FDAP GEN3Request quotation
FDAP2ONEWIRELESS FIELD DEVICE ACCESS POINTRequest quotation
FDAP32FIELD DEVICE ACCESS POINT, GEN3 C1/D2Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/wireless/onewireless-network/field-device-access-point

Last source check: 2026-11-02

Field Device Access Point Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry