OneWireless Network
Field Device Access Point Gen3 Plus
FDAP Gen3 Plus adds ISA100 Wireless and WirelessHART field-device connectivity alongside a Cisco IW6300 heavy-duty access point.
FDAP Gen3 Plus adds ISA100 Wireless and WirelessHART field-device connectivity alongside a Cisco IW6300 heavy-duty access point. Its industrial IEEE 802.15.4 radio serves sensor traffic while the associated Cisco equipment supplies Wi-Fi. The retrofit-oriented arrangement lets a site combine these connection types within the published OneWireless architecture rather than deploy separate field-instrument access solutions.
Models: FDAP3P
Features & Benefits
- Field protocols
- ISA100 Wireless and WirelessHART
- Associated access point
- Cisco IW6300
- Supports concurrent field-instrument and Wi-Fi connectivity
Applications
- Industrial OneWireless field retrofits
Dimensions & Weight
- Dimensions
- 11.4 x 6.4 x 2.2 in; 290 x 183 x 56 mm
- Weight
- 2 kg; 4.6 lb
Others
- Ports
- 1X 10/100 Mbps Ethernet Port (Auto-Negotiation); 1X Grounding Cable; 2X External Antenna Ports (2.4 GHz)
- Number of Supported Enraf FlexLine Radar Gauges/WFI
- 13 Enraf FlexLine/WFI
- Operating Temperature
- -40 to +70 deg C
- Receiver Sensitivity
- -100 dBm @ 250 kbps
- Corrosion Resistance
- G3 per ANSI/ISA-S71.04-1985
- Quality of Service
- Supported
- Ingress Protection
- IP66/IP67
- Field Protocols
- ISA100 Wireless (IEC 62734); WirelessHART (IEC 62591)
- Transmit Power
- Max 18 dBm
- Frequency Band
- 2.4 to 2.483 GHz (ISM Band)
- Authentication
- Over-The-Air and BLE-Based Key Distribution
- Network Hops
- 4 hops
- Encryption
- 128-bit AES
- Standards
- CE; CSA: Class I, Division 2, Group A,B,C,D; ETSI; FCC; IC; IEC61326-1; Radio Approval; T4 Environment Hazardous, Class 1, Div 2/Zone 2 Hazardous Location
- Data Rate
- BLE: 1 Mbps (FHSS/FSK); ISA100: 250 Kbps (DSSS/O-QPSK); Wired: 10/100 Mbps
- Humidity
- 0 to 95% RH, Non-Condensing
- Series
- OneWireless™
- Models
- FDAP3P (Class 1 Div 2/Zone 2)
- Shock
- 15G Non-Operational; 4G–5G Operational
- Power
- Power over Ethernet (PoE) at 5 W Watt
| Parameter | Published value / configuration |
|---|---|
| Dimensions | 11.4 x 6.4 x 2.2 in; 290 x 183 x 56 mm |
| Weight | 2 kg; 4.6 lb |
| Ports | 1X 10/100 Mbps Ethernet Port (Auto-Negotiation); 1X Grounding Cable; 2X External Antenna Ports (2.4 GHz) |
| Number of Supported Enraf FlexLine Radar Gauges/WFI | 13 Enraf FlexLine/WFI |
| Operating Temperature | -40 to +70 deg C |
| Receiver Sensitivity | -100 dBm @ 250 kbps |
| Corrosion Resistance | G3 per ANSI/ISA-S71.04-1985 |
| Quality of Service | Supported |
| Ingress Protection | IP66/IP67 |
| Field Protocols | ISA100 Wireless (IEC 62734); WirelessHART (IEC 62591) |
| Transmit Power | Max 18 dBm |
| Frequency Band | 2.4 to 2.483 GHz (ISM Band) |
| Authentication | Over-The-Air and BLE-Based Key Distribution |
| Network Hops | 4 hops |
| Encryption | 128-bit AES |
| Standards | CE; CSA: Class I, Division 2, Group A,B,C,D; ETSI; FCC; IC; IEC61326-1; Radio Approval; T4 Environment Hazardous, Class 1, Div 2/Zone 2 Hazardous Location |
| Data Rate | BLE: 1 Mbps (FHSS/FSK); ISA100: 250 Kbps (DSSS/O-QPSK); Wired: 10/100 Mbps |
| Humidity | 0 to 95% RH, Non-Condensing |
| Series | OneWireless™ |
| Models | FDAP3P (Class 1 Div 2/Zone 2) |
| Shock | 15G Non-Operational; 4G–5G Operational |
| Power | Power over Ethernet (PoE) at 5 W Watt |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
1 parts
| Part Number | Description | Enquiry |
|---|---|---|
| FDAP3P | FIELD DEVICE ACCESS POINT, GEN3 PLUS | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
Field Device Access Point Gen3 Plus Image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
