AC, AL, AM, AT Series
AL-800/1000 Basic
AL-800 and AL-1000 are compact diaphragm meters for commercial and industrial gas loads.
AL-800 and AL-1000 are compact diaphragm meters for commercial and industrial gas loads. Both support AMR or AMI and offer temperature-compensated configurations. Their rated capacities differ at the same published differential and gas density, so the two models should be selected by actual load requirements rather than treated as one capacity.
Models: AL‑800, AL-1000
Features & Benefits
- AL-800 capacity
- 800 SCFH at ½ in water-column differential, 0.60 SG gas
- AL-1000 capacity
- 1,000 SCFH under the same conditions
- Optional compensation
- -30 to 140 °F
- Compact lightweight construction
Applications
- Commercial and industrial gas metering
General Overview
- Applications
- Commercial and industrial gas metering
- Models
- AL‑800, AL-1000
- Meter Types
- Diaphragm Gas Meter
Operating Conditions
- Temperature Compensation
- Optional
- Compensation Range
- -30 to 140 deg F (-34 to 60 deg C)
Performance
- Operating Pressure Range
- Up to 100 psig
- Maximum Flow Capacity
- AL-1000: 1000 SCFH (0.60 specific gravity gas) at 1/2 in WC differential; AL-800: 800 SCFH (0.60 specific gravity gas) at 1/2 in WC differential
- Maximum Allowable Operating Pressure (MAOP)
- 20 or 100 psig (140 or 6895 mbar)
Measurement
- Measurement Principle
- Positive displacement diaphragm meter
Index
- Index Type
- Pointer or Odometer
Construction
- Construction Materials
- Die‑Cast Aluminum Case, Graphite‑Filled Phenolic Valves
- Coating Type
- Polyester primer with polyurethane top coat
Connection Options
- Connection Size
- 30LT, 45LT, 60LT, 100LT, 1‑1/2 in NPT and others
Safety & Compliance
- Approvals
- ANSI B109.2, Measurement Canada Accredited, ISO 9001:2000
| Parameter | Published value / configuration |
|---|---|
| Applications | Commercial and industrial gas metering |
| Models | AL‑800, AL-1000 |
| Meter Types | Diaphragm Gas Meter |
| Temperature Compensation | Optional |
| Compensation Range | -30 to 140 deg F (-34 to 60 deg C) |
| Operating Pressure Range | Up to 100 psig |
| Maximum Flow Capacity | AL-1000: 1000 SCFH (0.60 specific gravity gas) at 1/2 in WC differential; AL-800: 800 SCFH (0.60 specific gravity gas) at 1/2 in WC differential |
| Maximum Allowable Operating Pressure (MAOP) | 20 or 100 psig (140 or 6895 mbar) |
| Measurement Principle | Positive displacement diaphragm meter |
| Index Type | Pointer or Odometer |
| Construction Materials | Die‑Cast Aluminum Case, Graphite‑Filled Phenolic Valves |
| Coating Type | Polyester primer with polyurethane top coat |
| Connection Size | 30LT, 45LT, 60LT, 100LT, 1‑1/2 in NPT and others |
| Approvals | ANSI B109.2, Measurement Canada Accredited, ISO 9001:2000 |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Published part numbers
10 parts
| Part Number | Description | Enquiry |
|---|---|---|
| 01122P031 | GASKET HH 20# AL800 | Request quotation |
| 10271R003 | .025 DIA. MONEL SEAL WIRE (8LB SPOOL) | Request quotation |
| 10347P060 | SCREW-18-18 X 7/8 FILL HD - AL800 | Request quotation |
| 11635P032 | SCREW, HEX HD., 3/8-16X1.00 | Request quotation |
| 11635P075 | SCREW HEX 3/8-16X1 1/2 DRILLED | Request quotation |
| 11635P076 | SCREW HEX 3/8-16X1 5/16 AL800 | Request quotation |
| 11635P077 | SCREW 3/8-16X1 5/16DR(P076) | Request quotation |
| 11970P001 | PIPE PLUG, HX HD, 1/4" NPT | Request quotation |
| 13519P271 | SCREW, ROUND HEAD, #8-32 X 9/16 LG. | Request quotation |
| 16233P012 | WRIGGLER AL800/1400/2300/5000 | Request quotation |
Manufacturer sources
Last source check: 2026-11-02
AL800/1000 · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
