Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

AC, AL, AM, AT Series

AL-2300 Basic

AL-2300 is offered as a remanufactured industrial diaphragm meter for commercial and industrial gas loads.

AL-2300 is offered as a remanufactured industrial diaphragm meter for commercial and industrial gas loads. Its mechanism uses molded diaphragms and reinforced rods within an aluminum case. Self-lubricating bushings, low-friction seals and graphite-filled valves reduce wear, while tamper-indicating security seals support inspection of the installed meter during its service life.

Models: AL‑2300

Features & Benefits

Offering
Remanufactured AL-2300
Case
Die-cast aluminum
  • Low-friction components and self-lubricating bushings support maintenance economy

Applications

  • Commercial and industrial gas metering

Specifications

General Overview

Models
AL‑2300
Applications
Commercial and industrial gas metering
Meter Types
Diaphragm Gas Meter

Performance

Maximum Allowable Operating Pressure (MAOP)
100 psig (6895 mbar)
Operating Pressure Range
Up to 100 psig
Maximum Flow Capacity
2300 SCFH (65.1 m³/h) at 1/2‑in WC differential

Operating Conditions

Temperature Compensation
Optional
Compensation Range
-30 to 140 deg F (-34 to 60 deg C)

Construction

Construction Materials
Die‑Cast Aluminum Case, Graphite‑Filled Phenolic Valves

Measurement

Measurement Principle
Positive displacement diaphragm meter

Flow & Performance

Extended Flow Range
Up to 23,000 SCFH depending on pressure conditions

Connection Options

Connection Type
4 in NPT or 4 in Flanged

Index

Index Type
Pointer or Odometer

Safety & Compliance

Approvals
ANSI B109.2, ISO 9001:2000 certified manufacturing
AL-2300 Basic — manufacturer page values
ParameterPublished value / configuration
ModelsAL‑2300
ApplicationsCommercial and industrial gas metering
Meter TypesDiaphragm Gas Meter
Maximum Allowable Operating Pressure (MAOP)100 psig (6895 mbar)
Operating Pressure RangeUp to 100 psig
Maximum Flow Capacity2300 SCFH (65.1 m³/h) at 1/2‑in WC differential
Temperature CompensationOptional
Compensation Range-30 to 140 deg F (-34 to 60 deg C)
Construction MaterialsDie‑Cast Aluminum Case, Graphite‑Filled Phenolic Valves
Measurement PrinciplePositive displacement diaphragm meter
Extended Flow RangeUp to 23,000 SCFH depending on pressure conditions
Connection Type4 in NPT or 4 in Flanged
Index TypePointer or Odometer
ApprovalsANSI B109.2, ISO 9001:2000 certified manufacturing

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

10 parts

Part NumberDescriptionEnquiry
01122P048GASKET, HANDHOLE PLATERequest quotation
10956P028BUSHING, .62ODX.44IDX.88, SSTRequest quotation
10956P092BUSHING AL2300 TANG WRISTRequest quotation
11094P020PIN-BELL CRK AL2300/5000Request quotation
11970P003HEX HD PIPE PLUG, DRILLED FOR SEAL WIRERequest quotation
13981P033WASHER, 1.00ODX.41IDX.06W, STLRequest quotation
17318G006ARM VALVE ASSY-AL2300Request quotation
17358G008ARM FRONT SHORT FLAG-AL2300Request quotation
17358G045RM-SHORT FLAG BACK-AL2300Request quotation
17614P041WASHER AL2300/5000Request quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/utilities/gas/gas-metering/basic-gas-meters/ac-al-am-at-series/al-2300-basic

Last source check: 2026-11-02

AL2300 · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry