Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

AC, AL, AM, AT Series

AC-250 NX

AC-250 NX is a compact residential diaphragm meter using an injection-molded diaphragm cartridge and a single O-ring sealing surface.

AC-250 NX is a compact residential diaphragm meter using an injection-molded diaphragm cartridge and a single O-ring sealing surface. Its magnetic index drive, wear-resistant valves and tamper-indicating seals support long-term operation. The small, lightweight arrangement suits restricted meter locations, including apartment meter trees, with the published capacity tied to the stated gas and differential.

Models: AC‑250NX

Features & Benefits

Published capacity
250 SCFH at ½ in water-column differential with 0.60 SG gas
Case
Die-cast aluminum
  • Compact design eases installation in limited space

Applications

  • Residential gas metering

Detailed capabilities

AC-250 NX — product role

AC-250 NX is a compact residential diaphragm meter using an injection-molded diaphragm cartridge and a single O-ring sealing surface. Its magnetic index drive, wear-resistant valves and tamper-indicating seals support long-term operation. The small, lightweight arrangement suits restricted meter locations, including apartment meter trees, with the published capacity tied to the stated gas and differential.

Manufacturer reference ↗

Measurement cartridge and physical design

AC-250NX uses an injection-molded convoluted diaphragm and a single O-ring sealing surface. Its die-cast aluminum case, graphite-filled valves, magnetic index drive and tamper seals support a small, lightweight arrangement. The published capacity is250SCFH for0.60-specific-gravity gas at half an inch water-column differential, not a pressure-independent maximum.

Manufacturer reference ↗

Specifications

General Overview

Applications
Residential compact gas metering
Models
AC‑250NX
Meter Types
Diaphragm Gas Meter

Performance

Maximum Flow Capacity
250 SCFH (7.1 m³/h) at 1/2 in WC differential
Maximum Allowable Operating Pressure (MAOP)
5 psig

Index

Index Type
Pointer or Odometer

Physical

Dimensions
10.5 in Height x 9 in Width x 6.9 in Depth

Construction

Construction Materials
Die‑Cast Aluminum Case, Graphite‑Filled Phenolic Valves
Coating Type
Single‑coat polyester finish

Connection Options

Connection Size
10LT, 20LT, 30LT, 1A Sprague, #1 Pitts, 1.25 in BSP

Operating Conditions

Compensation Range
-30 to +120 deg F (-34 to +49 deg C)

Safety & Compliance

Approvals
ANSI B109.1 (meets and exceeds)
AC-250 NX — manufacturer page values
ParameterPublished value / configuration
ApplicationsResidential compact gas metering
ModelsAC‑250NX
Meter TypesDiaphragm Gas Meter
Maximum Flow Capacity250 SCFH (7.1 m³/h) at 1/2 in WC differential
Maximum Allowable Operating Pressure (MAOP)5 psig
Index TypePointer or Odometer
Dimensions10.5 in Height x 9 in Width x 6.9 in Depth
Construction MaterialsDie‑Cast Aluminum Case, Graphite‑Filled Phenolic Valves
Coating TypeSingle‑coat polyester finish
Connection Size10LT, 20LT, 30LT, 1A Sprague, #1 Pitts, 1.25 in BSP
Compensation Range-30 to +120 deg F (-34 to +49 deg C)
ApprovalsANSI B109.1 (meets and exceeds)

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Resources

Filter documents by type

Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.

Honeywell resource listing ↗

Part Number

Published model / variant identifiers. A full ordering code requires the manufacturer configuration.

Published part numbers

1 parts

Part NumberDescriptionEnquiry
BKD6BQ22AAK1AC-250 NX 10# REG 0.05M OD 20LT SSRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/utilities/gas/gas-metering/basic-gas-meters/ac-al-am-at-series/ac-250-nx

Last source check: 2026-11-02

AC-250NX · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry