Communication Devices
AM540
AM540 provides two-way G3-PLC communication between supported AS3000 or AS3500 meters and a Beacon data concentrator.
AM540 provides two-way G3-PLC communication between supported AS3000 or AS3500 meters and a Beacon data concentrator. It is specifically designed for those Honeywell polyphase meters and operates autonomously within the AMI network. Collected readings can be organized as a virtual meter before passing through the collection system to the head end.
Models: AM540
Features & Benefits
- Technology
- G3-PLC
- Meter compatibility
- AS3000 and AS3500
- Concentrator
- Beacon
- Uses power-line communication for AMI collection
Applications
- Remote electricity meter reading
Detailed capabilities
AM540 — product role
AM540 provides two-way G3-PLC communication between supported AS3000 or AS3500 meters and a Beacon data concentrator. It is specifically designed for those Honeywell polyphase meters and operates autonomously within the AMI network. Collected readings can be organized as a virtual meter before passing through the collection system to the head end.
G3-PLC collection and buffering
AM540 communicates between compatible AS3000/AS3500 meters and the Beacon concentrator over power lines. It operates autonomously, collecting meter readings and retaining them as a virtual meter before forwarding. The specific Honeywell meter pairing is essential: the source does not identify AM540 as a universal add-on for arbitrary polyphase meters.
General Overview
- Applications
- Works with AS3000 and AS3500 polyphase meters
- Role
- Enables meter ↔ data concentrator communication in AMI systems
- Device Type
- G3‑PLC communication module for AMI
Electrical Characteristics
- Voltage Range
- 230 VAC ±20%
- Power Consumption
- ~1.6 to 3.6 W depending on configuration
- Frequency Range
- 50/60 Hz ±5%
Protocols & Configuration
- Supported Protocols
- DLMS/COSEM, IDIS package 2
Operating Conditions
- Storage Temperature
- -40 to +80 deg C
- Operating Temperature Range
- -25 to +70 deg C
Physical
- Protection Class
- IP51
- Dimensions
- 167 x 53 x 35 mm
Communication
- Network Type
- G3‑PLC (Power Line Communication)
- Network Frequncies
- A-band (25 to 95 kHz)
- Data Rate
- Up to 40 kbps
- Communication Modes
- Two-way communication with data concentrator
Mechanical
- Materials
- Polycarbonate, flame-retardant
Environmental
- Humidity
- Up to 95% non-condensing
Safety & Compliance
- Approvals
- PLC Standards - IEEE P1901.2, ITU G.hnem (G.9955), DSMR, NTA, OMS
| Parameter | Published value / configuration |
|---|---|
| Applications | Works with AS3000 and AS3500 polyphase meters |
| Role | Enables meter ↔ data concentrator communication in AMI systems |
| Device Type | G3‑PLC communication module for AMI |
| Voltage Range | 230 VAC ±20% |
| Power Consumption | ~1.6 to 3.6 W depending on configuration |
| Frequency Range | 50/60 Hz ±5% |
| Supported Protocols | DLMS/COSEM, IDIS package 2 |
| Storage Temperature | -40 to +80 deg C |
| Operating Temperature Range | -25 to +70 deg C |
| Protection Class | IP51 |
| Dimensions | 167 x 53 x 35 mm |
| Network Type | G3‑PLC (Power Line Communication) |
| Network Frequncies | A-band (25 to 95 kHz) |
| Data Rate | Up to 40 kbps |
| Communication Modes | Two-way communication with data concentrator |
| Materials | Polycarbonate, flame-retardant |
| Humidity | Up to 95% non-condensing |
| Approvals | PLC Standards - IEEE P1901.2, ITU G.hnem (G.9955), DSMR, NTA, OMS |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Manufacturer sources
Last source check: 2026-11-02
AM540 image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
