Commercial & Industrial Meters
A1500 Electronic Polyphase Meter
A1500 handles complex time-of-use electricity metering for commercial, industrial and smart-grid installations.
A1500 handles complex time-of-use electricity metering for commercial, industrial and smart-grid installations. The manufacturer identifies extensive metrology and a wide-range power supply as part of its design. It operates independently or within an AMR or AMI system through supported communication modules, allowing the selected configuration to match the site's collection architecture.
Models: A1500 Electronic Polyphase Meter
Features & Benefits
- Operation
- Standalone or AMR/AMI integration
- Communications
- Supporting modules
- Supports complex tariff and metrology requirements
Applications
- Commercial and industrial electricity metering
Performance
- Accuracy
- Class 2, 1, 0.5S, 0.2S, MID A/B/C
Operating Conditions
- Voltage Range
- 3 x 58/100V to 3 x 240/415V (wide range -20 to +15%)
- Temperature Range
- Operating : -40 to +70 deg C; Storage: -40 to +80 deg C
- Protection Class
- IP51 (housing), IP31 (terminal)
- Power Consumption
- <0.8 W voltage circuit, <0.01 VA current circuit
Electrical
- Starting Current
- <1 mA
- Current Range
- 5(60)A, 5(80)A, 5(100)A; CT ranges also supported
Communication
- Readout Protocol
- EN62056-21 for profile data
Measurement & Metrology
- Quadrant Measurement
- +P, -P, +Q, -Q (Q1–Q4)
Interfaces
- Outputs
- 6 electronic pulse/control outputs, Relay: 1 mechanical relay (optional)
- Optical Interface
- IEC 62056-21
- Inputs
- Control: 4 electronic inputs, Pulse: Up to 4 (optional)
General Overview
- Meter Types
- Electronic three‑phase (polyphase) meter
- Applications
- Commercial and industrial customers
Construction
- Materials
- Polycarbonate, flame-retardant
Functional Features
- Instrumentation Values
- Voltage (U), Current (I), Frequency (f) etc.
Environmental
- Humidity
- As per EN62052-11
Electrical Characteristics
- Frequency Range
- 50/60 Hz or 16.7 Hz
Measurement & Data
- Energy Registers
- Active, Reactive, Apparent
Connection Options
- Connection Type
- Direct, CT, CT/VT
Safety & Compliance
- Approvals
- EN, IEC, MID compliant, EN62053-21, EN62053-22, EN50470-3
| Parameter | Published value / configuration |
|---|---|
| Accuracy | Class 2, 1, 0.5S, 0.2S, MID A/B/C |
| Voltage Range | 3 x 58/100V to 3 x 240/415V (wide range -20 to +15%) |
| Temperature Range | Operating : -40 to +70 deg C; Storage: -40 to +80 deg C |
| Protection Class | IP51 (housing), IP31 (terminal) |
| Power Consumption | <0.8 W voltage circuit, <0.01 VA current circuit |
| Starting Current | <1 mA |
| Current Range | 5(60)A, 5(80)A, 5(100)A; CT ranges also supported |
| Readout Protocol | EN62056-21 for profile data |
| Quadrant Measurement | +P, -P, +Q, -Q (Q1–Q4) |
| Outputs | 6 electronic pulse/control outputs, Relay: 1 mechanical relay (optional) |
| Optical Interface | IEC 62056-21 |
| Inputs | Control: 4 electronic inputs, Pulse: Up to 4 (optional) |
| Meter Types | Electronic three‑phase (polyphase) meter |
| Applications | Commercial and industrial customers |
| Materials | Polycarbonate, flame-retardant |
| Instrumentation Values | Voltage (U), Current (I), Frequency (f) etc. |
| Humidity | As per EN62052-11 |
| Frequency Range | 50/60 Hz or 16.7 Hz |
| Energy Registers | Active, Reactive, Apparent |
| Connection Type | Direct, CT, CT/VT |
| Approvals | EN, IEC, MID compliant, EN62053-21, EN62053-22, EN50470-3 |
Values retain manufacturer model qualifications. Review Honeywell specifications ↗
Resources
Resources linked from the manufacturer’s page. Confirm the document revision and applicable model before installation or ordering.
Honeywell resource listing ↗Part Number
Published model / variant identifiers. A full ordering code requires the manufacturer configuration.
Manufacturer sources
Last source check: 2026-11-02
A1500 image · Manufacturer ownership retained; republication licence not independently confirmed
ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.
Your next project. A clear starting point.
Tell us about your facility and what you need to achieve.
