Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Pressure Switches & Gauges

Vaporstat ® Controllers L408J

L408J Vaporstat addresses low-pressure vapor heating and compatible liquid or gas service through a stainless diaphragm.

L408J Vaporstat addresses low-pressure vapor heating and compatible liquid or gas service through a stainless diaphragm. Adjustable subtractive differential and top-mounted screws support setup, with a clear cover for reading settings. Direct siphon-loop or surface mounting is described; the 15 psi surge limit is not the operating setpoint range.

Features & Benefits

Ambient Temperature Range
-37 to +66 deg C (-35 to +150 deg F)
Maximum System Pressure
Up to 4 psi (27.6 kPa)
Maximum Surge Pressure
15 psi (103.4 kPa)
Electrical Connections
Internal screw terminals
Maintenance Interval
Periodic testing and scaleplate adjustment recommended
Differential Range
Adjustable subtractive: 4-16 oz/in² (1.7-6.9 kPa)
Adjustment Method
Screws on top of case; scale marked in psi and kPa
Compatible Media
Steam, Air, Non-Combustible Gases, Ammonia, Oxygen, Distilled Water
Contact Ratings
120 VAC: 8 A (Full Load), 48 A (Locked Rotor), 10 A (Non-Inductive)|240 VAC: 5.1 A (Full Load), 30.6 A (Locked Rotor), 5 A (non-inductive)
Pressure Range
0 to 16 oz/in² or 0 to 4 psi (0 to 27.6 kPa)
Mounting Types
1/4-18 NPT internal thread, surface mount via knockouts|Pipe mounting|Steam trap (siphon loop)
Model Series
L408J1009, L408J1017: SPDT (Break R-B, Make R-W)|L408J1025, L408J1033: SPDT (Make R-W only; terminal B omitted)
Control Type
Operating control/automatic limit
Switch Type
MicroSwitch® snap‑acting switch
Reset Type
Automatic
Functions
Line voltage pressure controller for vapor heating systems and low-pressure applications
Approvals
UL Listed (MP466), CSA Approved (LR1620), WEEE Directive 2012/19/EU - Waste Electrical and Electronic Equipment Directive
Material
Gray case with clear plastic cover
  • A transparent cover permits reading settings without opening the case.

Applications

  • Vapor heating
  • Compatible noncombustible fluid pressure control

Specifications

Environmental Conditions

Ambient Temperature Range
-37 to +66 deg C (-35 to +150 deg F)

Pressure Specifications

Maximum System Pressure
Up to 4 psi (27.6 kPa)
Maximum Surge Pressure
15 psi (103.4 kPa)
Pressure Range
0 to 16 oz/in² or 0 to 4 psi (0 to 27.6 kPa)

Connections & Interfaces

Electrical Connections
Internal screw terminals

Electrical Specifications

Maintenance Interval
Periodic testing and scaleplate adjustment recommended

Measurement, Media & Physical Properties

Differential Range
Adjustable subtractive: 4-16 oz/in² (1.7-6.9 kPa)

Mechanical Design & Adjustment Characteristics

Adjustment Method
Screws on top of case; scale marked in psi and kPa

Applications & Compatibility

Compatible Media
Steam, Air, Non-Combustible Gases, Ammonia, Oxygen, Distilled Water
Applications
Vapor heating systems

Actuation, Valve & Motion Control Specifications

Contact Ratings
120 VAC: 8 A (Full Load), 48 A (Locked Rotor), 10 A (Non-Inductive); 240 VAC: 5.1 A (Full Load), 30.6 A (Locked Rotor), 5 A (non-inductive)

Installation & Mounting Specifications

Mounting Types
1/4-18 NPT internal thread, surface mount via knockouts; Pipe mounting; Steam trap (siphon loop)

Overview

Model Series
L408J1009, L408J1017: SPDT (Break R-B, Make R-W); L408J1025, L408J1033: SPDT (Make R-W only; terminal B omitted)

Control, Logic & Functional Behavior

Control Type
Operating control/automatic limit
Functions
Line voltage pressure controller for vapor heating systems and low-pressure applications

Actuation, Control & Motion Characteristics

Switch Type
MicroSwitch® snap‑acting switch

Safety, Protection & Reliability

Reset Type
Automatic

Standards & Certifications

Approvals
UL Listed (MP466), CSA Approved (LR1620), WEEE Directive 2012/19/EU - Waste Electrical and Electronic Equipment Directive

Material Specifications

Material
Gray case with clear plastic cover
Vaporstat ® Controllers L408J — manufacturer page values
ParameterPublished value / configuration
Ambient Temperature Range-37 to +66 deg C (-35 to +150 deg F)
Maximum System PressureUp to 4 psi (27.6 kPa)
Maximum Surge Pressure15 psi (103.4 kPa)
Pressure Range0 to 16 oz/in² or 0 to 4 psi (0 to 27.6 kPa)
Electrical ConnectionsInternal screw terminals
Maintenance IntervalPeriodic testing and scaleplate adjustment recommended
Differential RangeAdjustable subtractive: 4-16 oz/in² (1.7-6.9 kPa)
Adjustment MethodScrews on top of case; scale marked in psi and kPa
Compatible MediaSteam, Air, Non-Combustible Gases, Ammonia, Oxygen, Distilled Water
ApplicationsVapor heating systems
Contact Ratings120 VAC: 8 A (Full Load), 48 A (Locked Rotor), 10 A (Non-Inductive); 240 VAC: 5.1 A (Full Load), 30.6 A (Locked Rotor), 5 A (non-inductive)
Mounting Types1/4-18 NPT internal thread, surface mount via knockouts; Pipe mounting; Steam trap (siphon loop)
Model SeriesL408J1009, L408J1017: SPDT (Break R-B, Make R-W); L408J1025, L408J1033: SPDT (Make R-W only; terminal B omitted)
Control TypeOperating control/automatic limit
FunctionsLine voltage pressure controller for vapor heating systems and low-pressure applications
Switch TypeMicroSwitch® snap‑acting switch
Reset TypeAutomatic
ApprovalsUL Listed (MP466), CSA Approved (LR1620), WEEE Directive 2012/19/EU - Waste Electrical and Electronic Equipment Directive
MaterialGray case with clear plastic cover

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

4 parts

Part NumberDescriptionEnquiry
L408J1009/UVAPORSTAT CONTROLLERRequest quotation
L408J1017/UPRESSURETROLRequest quotation
L408J1025/UPRESSURETROLRequest quotation
L408J1033/UPRESSURETROLRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/fuel-and-air-delivery/pressure-switches-and-gauges/vaporstat-controllers-l408j

Last source check: 2026-11-02

Vaporstat ® Controllers · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry