Fire & Life Safety · Building Systems · Industrial Automation [email protected] +880 1347 561 256
Honeywell Process Measurement & Control

Pre-Mix Equipment

HG Mixing Tubes

HG mixing tubes use higher gas pressure to blend fuel and air while allowing a lower-pressure combustion-air blower.

HG mixing tubes use higher gas pressure to blend fuel and air while allowing a lower-pressure combustion-air blower. Combined with MICRO-RATIO control, they provide localized mixture supply to one or several burners. The source distinguishes these high-pressure mixing tubes from LG and MULTI-RATIO equipment intended for low-pressure gas.

Features & Benefits

Series
HG
Combustion Air Differential Pressure
Measured at HG inlet
Maximum Return Air Temperature
500 deg F (260 deg C)
Gas Orifice Drill Size
Stamped on casting
Gas Orifice Quantity
Size‑dependent (fixed per HG size)
Air Velocity Range
500 to 1500 SFPM (for air heating applications)
Connection Type
NPT (ANSI B2.1)
Turndown Ratio
Up to 15:1 (with natural gas)
Nominal Sizes
2 in, 3 in, 4 in, 6 in, 8 in
Mixer Type
Venturi-type premixing tube
Fuel Type
Natural Gas, Propane, Butane
Approvals
ANSI Standard B2.1
Material
Cast Metal
  • Using gas-jet energy permits a lower-pressure air blower.

Applications

  • Premix supply to single or multiple burners using higher-pressure gas

Detailed capabilities

Higher-pressure gas supplies mixing energy

HG uses gas-jet momentum to blend fuel with air, allowing a lower-pressure combustion-air blower than an arrangement that relies on blower pressure alone. A MICRO-RATIO valve sets preproportioning for localized single- or multiple-burner supply. Most clean gases are described. This high-pressure operating principle distinguishes HG from the low-pressure LG/MULTI-RATIO products named alongside it.

Manufacturer reference ↗

Features and benefits

  • Using gas-jet energy permits a lower-pressure air blower.

Manufacturer reference ↗

Published application context

  • Premix supply to single or multiple burners using higher-pressure gas

Manufacturer reference ↗

Specifications

Overview

Series
HG

Pressure Specifications

Combustion Air Differential Pressure
Measured at HG inlet

Air/Exhaust/Flue Gas Temperatures

Maximum Return Air Temperature
500 deg F (260 deg C)

Dimensions & Size Specifications

Gas Orifice Drill Size
Stamped on casting
Nominal Sizes
2 in, 3 in, 4 in, 6 in, 8 in

Combustion, Mixing & Fuel Dynamics

Gas Orifice Quantity
Size‑dependent (fixed per HG size)

Air & Combustion Air Specifications

Air Velocity Range
500 to 1500 SFPM (for air heating applications)

Connections & Interfaces

Connection Type
NPT (ANSI B2.1)

Performance, Flow & Capacity

Turndown Ratio
Up to 15:1 (with natural gas)

Applications & Compatibility

Applications
Burners: LINOFLAME®, INFRAWAVE®, AIRFLO®, COMBUSTIFUME®, LO‑NOX™, Nozzle: STICKTITE™, Series “SN”

Mixing & Combustion Sub‑Components

Mixer Type
Venturi-type premixing tube

Fuel, Gas & Media Specifications

Fuel Type
Natural Gas, Propane, Butane

Standards & Certifications

Approvals
ANSI Standard B2.1

Material Specifications

Material
Cast Metal
HG Mixing Tubes — manufacturer page values
ParameterPublished value / configuration
SeriesHG
Combustion Air Differential PressureMeasured at HG inlet
Maximum Return Air Temperature500 deg F (260 deg C)
Gas Orifice Drill SizeStamped on casting
Nominal Sizes2 in, 3 in, 4 in, 6 in, 8 in
Gas Orifice QuantitySize‑dependent (fixed per HG size)
Air Velocity Range500 to 1500 SFPM (for air heating applications)
Connection TypeNPT (ANSI B2.1)
Turndown RatioUp to 15:1 (with natural gas)
ApplicationsBurners: LINOFLAME®, INFRAWAVE®, AIRFLO®, COMBUSTIFUME®, LO‑NOX™, Nozzle: STICKTITE™, Series “SN”
Mixer TypeVenturi-type premixing tube
Fuel TypeNatural Gas, Propane, Butane
ApprovalsANSI Standard B2.1
MaterialCast Metal

Values retain manufacturer model qualifications. Review Honeywell specifications ↗

Part Number

Published part numbers

10 parts

Part NumberDescriptionEnquiry
012139E2" SERIES HG MIXING TUBE DINRequest quotation
012140E3" SERIES HG MIXING TUBE DINRequest quotation
015673E6" SERIES HG MIXING TUBE DINRequest quotation
021535E4" SERIES HG MIXING TUBE DINRequest quotation
11984MR-100-22 MULTI-RATIO MXRRequest quotation
11985MR-100-25 MULTI-RATIO MXRRequest quotation
11988MR-125-28 MULTI-RATIO MXRRequest quotation
11994MR-150-51 MULTI-RATIO MXRRequest quotation
11999MR-200-66 MULTI-RATIO MXRRequest quotation
301622MIXER MG-50 NATURAL GASRequest quotation
Manufacturer sources

https://process.honeywell.com/us/en/products/thermal-solutions/burners-and-heat-exchangers/pre-mix-equipment/hg-mixing-tubes

Last source check: 2026-11-02

HG Mixing Tubes Product Image · Manufacturer ownership retained; republication licence not independently confirmed

ABID Automation LTD maintains this independent product reference. Honeywell owns its product names and trademarks. Current manufacturer documentation governs specification, availability and certification.

Your next project. A clear starting point.

Tell us about your facility and what you need to achieve.

CallSend enquiry